Abstract:Abstract High-temperature rheology testing is critical for all fracturing applications to design the well-specific breaker and additive schedule. The rheology depends on the source water quality, testing temperatures, shear profiles, and additives-stabilizers-breaker combinations used for the test. The process for each treatment requires extensive staff to fine-tune the optimal fluid formulations requiring proportional laboratory resources and time. Data analytics intelligent system design can be implemented beyond analytical mathematical correlations to reduce the time and resource requirements. A total of 820 rheology tests were conducted using the high-pressure/high-temperature (HP/HT) rheometer Chandler 5550 and ISO 13503-1 guideline. Temperatures ranged from 200 to 336°F and fluid systems consisted of borate and metallic crosslinkers. A structured database with 40 input-output features was prepared to digitize each rheology curve by incorporating the source water parameters, laboratory setup details, additive concentrations, and rheology (consistency and behavior indices) results. ML algorithms and techniques were then applied to the database to predict the rheology for given testing parameters. The algorithm inputs were prepared as the source water quality (i.e., monovalent/divalent ions, minerals, salinity, hardness etc.) and the test temperature. The outputs predicted were set to be the detailed fluid formulation for specified viscosity and fluid stability requirements. Data cleaning and ingestion were done thoroughly to remove nonphysical outliers such as bob-climbing during testing. A detailed parametric correlation study followed and revealed the impact of different parameters, especially divalent ions such as Ca+2 and Mg+2, and total dissolved solids on the rheology. The training set to holdout set ratio was fixed at 90:10 for different trials. Further, 5-fold cross validation was used to choose the hyperparameters for the final model. To predict fluid formulation/target rheology in terms of additive concentrations, which is a continuous quantity, regression-based models were attempted. Ridge regression and ensemble methods such as random forest and boosting type models were trained. Boosting-based models gave an average 88% goodness of fit (R2) for the holdout datasets. For field implementation, the model results were used to create a digital laboratory request for the laboratory technician instead of having the fracturing design engineer manually handle this task. The physics-based data-driven ML model reduced an average HP/HT runs/well from 20 to 5 yielding a 400% laboratory resource savings. This ML-based workflow is unique and does not exist in the literature. It can enable resource optimization for all large-scale fracturing projects and reduce manual laborious input for generating laboratory requests followed by trial-and-error optimizations with a potential of saving thousands of hours and reduce all the laboratory equipment maintenance costs. The technique can easily be extended to designing cementing fluids, drilling muds, and corrosion properties.

A Statistics-Based Correlation for the Assessment of Water-Based Mud Performance: Yield Point Prediction

Data-Driven Framework for Real-time Rheological Properties Prediction of Flat Rheology Synthetic Oil-Based Drilling Fluids

Modeling Apparent Viscosity, Plastic Viscosity and Yield Point in Water-Based Drilling Fluids: Comparison of Various Soft Computing Approaches, Developed Correlations and a Committee Machine Intelligent System

Real-Time Prediction of Rheological Properties of Invert Emulsion Mud Using Adaptive Neuro-Fuzzy Inference System

Characterization based machine learning modeling for the prediction of the rheological properties of water-based drilling mud: an experimental study on grass as an environmental friendly additive

FACILITATING MUD DESIGN, CEMENTING JOB DESIGN AND THE ENTIRE DRILLING OPERATIONS BY MODELLING THE RHEOLOGICAL PROPERTIES OF WATER-BASED MUD AND OIL-BASED MUD WITH TEMPERATURE

Surrogate models to predict initial shear stress of clay bentonite drilling fluids incorporated with polymer under various temperature conditions

Real-Time Prediction of the Rheological Properties of Water-Based Drill-In Fluid Using Artificial Neural Networks

A novel data-driven model for real-time prediction of static Young's modulus applying mud-logging data

A robust fuzzy logic-based model for predicting the critical total drawdown in sand production in oil and gas wells

A CFD Validation Effect of YP/PV from Laboratory-Formulated SBMDIF for Productive Transport Load to the Surface

Development of a new correlation to determine the static Young’s modulus

Prediction of Minimum Mud Weight for Prevention of Breakout Using New 3D Failure Criterion to Maintain Wellbore Stability

Development of rheological models depending on the time, temperature, and pressure of wellbore cement compositions: a case study of southern Iran's exploratory oilfields

A Holistic Approach to Characterize Mud Loss Using Dynamic Mud Filtration Data

Real-time prediction of Poisson’s ratio from drilling parameters using machine learning tools

High Accuracy Determination of Rheological Properties of Drilling Fluids Using the Marsh Funnel

Data Engineering and Supervised ML Enabled Predictive Model for HPHT Fracturing Fluid Rheology - Digital Laboratory Approach

Variation of Temperatures with Rheological Properties of Water Based Drilling Fluid Containing Rice Husk and Other Additives

Building 1D Mechanical Earth Model for Subba Oilfield in Iraq

A Developed Robust Model and Artificial Intelligence Techniques to Predict Drilling Fluid Density and Equivalent Circulation Density in Real Time