Abstract:In order to overcome the consumption of non renewable resources and serious environmental pollution caused by traditional petroleum based polymers , blending and modifying renewable PLA and wood fibers to replace traditional petroleum based plastics has become a current research hotspot. However, due to the large polarity difference between PLA and wood fibers, the performance of the composite material prepared is not ideal. To improve the performance of polylactic acid/poplar fiber (PLA/PF) composites and simplify the process, this study used cellulase and 2,2 '- (1,3-phenylene) - dioxazoline (PBO) co modification, a safe, environmentally friendly and simple process, to prepare the composites. The results show that the crystallization properties of cellulase and PBO-modified composites will be appropriately reduced, the microstructure shows that the interface of PLA/CF -5.5 /PBO is more tightly bonded, and the mechanical test results show that the modified material has excellent mechanical properties. Compared to the unmodified PLA/PF, PLA/CF -5.5 /PBO has a 28.85% increase in tensile strength , reaching 63.65 MPa. while its flexural strength reaches 116.07 MPa, representing a 21.45% increase. Surprisingly, the tensile and strength of PLA/CF -5.5 /PBO exceeds that of pure PLA, with the flexural modulus showing a significant increase of 43.96% compared to PLA. The above analysis shows that the effect of the two synergistic modification methods is significant, and the research results provide an environmental protection idea for the development of PLA matrix composites with high compatibility, good mechanical properties and good environmental adaptability, and broaden the application scope and value of the composites.

Recent progress on chemical modification of cellulose for high mechanical-performance Poly(lactic acid)/Cellulose composite: A review

A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

A comprehensive review on polylactic acid/lignin composites - Structure, synthesis, performance, compatibilization, and applications

Progress on homogeneously chemical modification of cellulose

A Comprehensive Review on Mechanical Properties of Natural Cellulosic Fiber Reinforced PLA Composites

Polylactic Acid/Lignin Composites: A Review

Facile Preparation of Cellulose/Polylactide Composite Materials with Tunable Mechanical Properties

Cellulose Modification for Improved Compatibility with the Polymer Matrix: Mechanical Characterization of the Composite Material

Modified Biomass-Reinforced Polylactic Acid Composites

Improvement in the Performance of the Polylactic Acid Composites by Using Deep Eutectic Solvent Treated Pulp Fiber

Physical modifications of cellulose nanocrystals by poly(d-lactic acid) and poly(ethylene glycol) (PDLA-PEG-PDLA) block copolymer to improve the mechanical properties of polylactide

Preparation and Properties of Graft-Modified Bagasse Cellulose/Polylactic Acid Composites

Mechanical Properties and Crystallinity of Specific PLA/Cellulose Composites by Surface Modification of Nanofibrillated Cellulose

In-situ Polycondensate-Coated Cellulose Nanofiber Heterostructure for Polylactic Acid-Based Composites with Superior Mechanical and Thermal Properties

Developing multifunctional cellulose derivatives for environmental and biomedical applications: Insights into modification processes and advanced material properties

Research Progress in the Synthesis and Modification of Polylactic Acid

Progress of biodegradable polylactic acid based composite material

Advances and Applications of Cellulose Bio-Composites in Biodegradable Materials

Chemical and Physical Modification of Lignin for Green Polymeric Composite Materials

Bio-based Green Composites with High Performance from Poly(lactic Acid) and Surface-Modified Microcrystalline Cellulose