Abstract:Radiative cooling utilizes high solar reflectivity and high infrared emissivity to achieve temperature cooling down, which has attracted extensive research interest as a zero-energy consumption manner. However, the design of photonic structures and metamaterials for radiative cooling do not exploit commercialization prospects due to high production costs and structural complexity. Here we propose an economical and scalable electrospinning method for fabricating high-performance sun-shading and radiative cooling composite flexible film. The composite film is a non-woven fabric of nanofibers with polymethyl methacrylate (PMMA) and aluminum oxide (Al2O3) nanoparticles. The diameter of the nanofibers distributes in the range of 300-1200 nm and Al2O3 nanoparticles are wrapped in the nanofibers. The nanofibers strongly scatter sunlight to enable high solar reflectivity and back-reflection layer is no more necessary. Molecular vibrations of PMMA and phonon polarization resonance of Al2O3 nanoparticles synergistically result in high infrared emissivity. At a thickness of 0.30 mm and with an Al2O3 content of 8%, this material exhibits exceptional solar reflectance levels of approximately 95% between wavelengths of 1.1-2.5 mu m. Additionally, it demonstrates an extremely low rate of solar absorption of approximately 5.5% between wavelengths of 0.3-1.1 mu m, distinguishing itself as a highly effective solar selective surface even without the inclusion of a back-reflective layer. Furthermore, the material exhibits ultrahigh infrared emissivity levels of approximately 0.98 within atmospheric windows ranging from 8 to 13 mu m. These remarkable characteristics position this material as a highly promising candidate for use in solar thermal energy conversion systems. As a result, the device shows a cooling performance that reaches a temperature decrease of up to 4.3 degrees C under 1000 W/m2 peak solar intensity and a decrease of 5.9 degrees C during nighttime. The composite film has enormous potential for use in vehicle shading and personal thermal management. Moreover, its mechanical properties allow for the flexibility needed to meet the demands of everyday use. Our work provides a straightforward and scalable method to manufacture products with exceptional sun shading and radiative cooling capabilities.

Mass-Producible Transparent Flexible Passive-Cooling Film

Low-cost and Transparent Cooling Films with Solar Selective Nanoparticles for Building Energy Saving

Transparent radiative cooling films containing poly(methylmethacrylate), silica, and silver

Colourful phase change material-incorporated flexible film for efficient passive radiative cooling

Highly Potent Transparent Passive Cooling Coating via Microphase-Separated Hydrogel Combining Radiative and Evaporative Cooling

Anti‐UV Passive Radiative Cooling Chiral Nematic Liquid Crystal Films for Thermal Management

Scalable and Flexible Porous Hybrid Film As a Thermal Insulating Subambient Radiative Cooler for Energy-Saving Buildings

Free-standing, colored, polymer film with composite opal photonic crystal structure for efficient passive daytime radiative cooling

Flexible highly thermal conductive hybrid film for efficient radiative cooling

A Self-Adaptive Film for Passive Radiative Cooling and Solar Heating Regulation

A transparent radiative cooling emitter with multi-band spectral regulation for building energy saving

Transparent and Flexible Thermal Insulation Window Material

An Intelligent Electrochromic Film with Passive Radiative Cooling and Synergistic Solar Light Control Capabilities for Displays and Smart Windows

Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

An environmentally friendly porous PDMS film via a template method based for passive daytime radiative cooling

Flexible Transparent Heat Mirror for Thermal Applications

Polyethylene terephthalate-based colored emitters for efficient daytime radiative cooling

Flexible Al2O3/polymethyl Methacrylate Composite Nanofibers for High-Performance Sun Shading and Radiative Cooling

Thermo‐Optically Designed Scalable Photonic Films with High Thermal Conductivity for Subambient and Above‐Ambient Radiative Cooling

Self-Cleaning Red-Toned Perylene Poly(aryl ether) Film with Superior NIR Reflectance for Passive Radiative Cooling

Three-layered films enable efficient passive radiation cooling of buildings