Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation and sodium storage performance of 2D bilayered V2O5⋅nH2O nanomaterial with Zn2+ intercalation

Enhanced zinc ion storage performance of V2O5·nH2O prepared by hydrothermal method with the assistance of sodium dodecylbenzene sulfonate

Li+, Na+ co-stabilized vanadium oxide nanobelts with bilayer structure for boosted Zinc-ion storage performance

Enhancing lithium/sodium-ion storage behaviors in V2O5 nanosheet by freeze-drying

Driving intercalation kinetic through hydrated Na+ insertion in V2O5 for high rate performance aqueous zinc ion batteries

Nickel pre-intercalated bilayer vanadium pentoxide hydrate for reversible structural evolution in Na-ion battery cathode

Facile synthesis of tetragonal NaV2O5·H2O nanosheets co-intercalated by high content of Na+ and H2O for boosted lithium storage

In‐Situ Construction of V2O5 Nanosheet/Nitrogen‐Doped Carbon Nanosheet Heterostructures with Interfacial C─O Bridging Bonds as the Cathode Material for Zn Ion Batteries

Facile synthesis of V 2 O 3 /nitrogen-doped carbon shell nanoflower for boosted aqueous zinc ion storage performance

Anomalous Zn2+ Storage Behavior in Dual‐Ion‐In‐Sequence Reconstructed Vanadium Oxides

Vanadium Oxide Intercalated with Conductive Metal–Organic Frameworks with Dual Energy‐Storage Mechanism for High Capacity and High‐Rate Capability Zn Ion Storage

Impact of the Morphology of V2O5Electrodes on the Electrochemical Na+-Ion Intercalation

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Sodium‐Ion Substituted Water Molecule in Layered Vanadyl Phosphate Enhancing Electrochemical Kinetics and Stability of Zinc Ion Storage

Intercalant-induced V T2g Orbital Occupation in Vanadium Oxide Cathode Toward Fast-Charging Aqueous Zinc-Ion Batteries

Facile Synthesis and Electrochemical Analysis of Zn-Doped V2O5 Anode Materials for High-Rate Li Storage

Enhanced charge transfer and reaction kinetics of vanadium pentoxide for zinc storage via nitrogen interstitial doping

Zn2+ storage performance and structural change of orthorhombic V2O5 nanowires as the cathode material for rechargeable aqueous zinc-ion batteries

Homo-interface and gradient N-doping cooperation to boost the rate capability of porous NaV8O20·nH2O nanoflake cathode in Zn-ion batteries

Organic pillars pre-intercalated V4+-V2O5·3H2O nanocomposites with enlarged interlayer and mixed valence for aqueous Zn-ion storage

Structural Modification of V2O5 as High-Performance Aqueous Zinc-Ion Battery Cathode