Abstract:CO2 capture is essential for addressing dual-carbon strategies and achieving carbon neutrality. Membrane separation is favored for CO2 separation due to its high efficiency, low energy consumption, and operational convenience. Combining supported liquid membrane technology with ionic liquids (ILs) enables continuous CO2 separation from flue gas without requiring regeneration, simplifying processes, and reducing steps compared to pure IL absorption or adsorption methods. However, supported IL membranes suffer from liquid leakage. This study proposes a novel mechanism for CO2 capture using liquid-catched supported membranes (LCSMs). The LCSM was formed by adding a liquid-locking polymer layer to a porous support membrane. This study investigates the CO2 separation performance of LCSMs from the perspectives of material optimization and operational conditions. Sodium polyacrylate was selected as the liquid-locking polymer material based on molecular simulations. Experiments were conducted to investigate the effects of the support membrane type, liquid type, and liquid concentration on CO2 separation by LCSMs. Further experiments examined the influence of temperature, pressure, liquid concentration, and gas source composition on the separation performance of LCSMs. The optimal conditions for membrane fabrication and operation were determined. In addition, the transmembrane transport mechanism of CO2 separation using LCSMs was studied using molecular dynamics simulations, modeling analyses, and calculations. The simple solution-diffusion mechanism could not accurately describe the CO2 transmembrane transport behavior. A modified solution-ionization-diffusion mechanism was proposed to elucidate the CO2 transmembrane transport mechanism in LCSMs, showing good agreement with experimental results of CO2/N2 separation. Finally, a process for CO2 separation from the flue gas was developed. Preliminary calculations indicated that the capture energy consumption could be reduced to less than 2 GJ/tCO2, significantly lower than traditional absorption methods, with broader applicability and reduced footprint. This process is simpler, continuous, and less expensive. These results indicate that LCSMs are promising and novel methods for CO2 capture, offering an effective and economical solution for industrial applications.

Developing hybrid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/titanium dioxide/water absorbent for CO2 separation

A Water-Lean Triazole Ionic Liquid Biphasic Solvent for Energy-Efficient CO2 Capture Through Reversible Polarity and Intermolecular Hydrogen Bonding

Process optimization of CO2membrane and cryogenic hybrid separation

Facilitated Transport Membranes With Ionic Liquids for CO2 Separations

Selective CO2 separation through physicochemical absorption by triazole‐functionalized ionic liquid binary absorbents

Mixed-Matrix Organo-Silica-Hydrotalcite Membrane for CO2 Separation Part 1: Synthesis and Analytical Description

CO2 Capture with Complex Absorbent of Ionic Liquid, Surfactant and Water

Study on the Performance of Cellulose Triacetate Hollow Fiber Mixed Matrix Membrane Incorporated with Amine-Functionalized NH2-MIL-125(Ti) for CO2 and CH4 Separation

Tailoring CO2/CH4 Separation Efficiency with [THTDP][Cl]/Pebax-1657 Supported Ionic Liquid Membranes: Design, Characterization, and Theoretical Insights

Preparation and Transmembrane Transport Mechanism of Liquid-Catched Supported Membranes with High CO2 Separation Performance

Supported Ionic Liquid Membranes with Dual-Site Interaction Mechanism for Efficient Separation of CO2

Synthesis of dual-functionalized APTES-Bentonite/PVDF mixed-matrix membranes for the efficient separation of CO2/CH4 and CO2/N2

Low-viscosity triethylbutylammonium acetate as a task-specific ionic liquid for reversible CO2 absorption

Layered Double Oxide/activated Carbon-Based Composite Adsorbent for Elevated Temperature H 2 /CO 2 Separation

Enhancement of CO2 Desorption from a Novel Absorbent (dimethyl Carbonate) by Using a PDMS/TiO2 Pervaporation Membrane

Novel Fluid Ionic Liquid Composites with Self-Assembled Porosity and Chemical Sites for Facilitating CO 2 Separation

Development of Mixed Matrix Membranes by Using NH2‐Functionalized UiO‐66 and [APTMS][AC] Ionic Liquid for the Separation of CO2

Study on developing a novel continuous separation device and carbon dioxide separation by process of hydrate combined with chemical absorption

Synthesis, Pelleting, and Performance Evaluation of a Novel K-Promoted Γ-Alumina/mgal-layered Double Oxide Composite Adsorbent for Warm Gas H2/CO2 Separation

Efficient Capture of CO2 from Flue Gas at High Temperature by Tunable Polyamine-Based Hybrid Ionic Liquids

Mesoporous bis(trimethoxysilyl)hexane (BTMSH)/tetraethyl orthosilicate (TEOS)-based hybrid silica aerogel membranes for CO2 capture