Production of Chemically Modified Bio-Based Wood Adhesive from Camote and Cassava Peels

Anna Mae Rabaca Reotutar,Roselle Yago Mamuad,Angelo Earvin Sy Choi

DOI: https://doi.org/10.3390/polym16040523

IF: 5

2024-02-16

Polymers

Abstract:Adhesives are significant for manufacturing competent, light, and sturdy goods in various industries. Adhesives are an important part of the modern manufacturing landscape because of their versatility, cost-effectiveness, and ability to enhance product performance. Formaldehyde and polymeric diphenylmethane diisocyanate (PMDI) are conventional adhesives utilized in wood applications and have been classified as carcinogenic, toxic, and unsustainable. Given the adverse environmental and health effects associated with synthetic adhesives, there is a growing research interest aimed at developing environmentally friendly bio-based wood adhesives derived from renewable resources. This study aimed to extract starch from camote and cassava peels and focuses on the oxidization of starch derived from camote and cassava peels using sodium hypochlorite to create bio-based adhesives. The mean yield of starch extracted from camote and cassava peels was 13.19 ± 0.48% and 18.92 ± 0.15%, respectively, while the mean weight of the oxidized starches was 34.80 g and 45.34 g for camote and cassava, respectively. Various starch ratios sourced from camote and cassava peels were examined in the production of bio-based adhesives. The results indicate that the 40:60 camote to cassava ratio yielded the highest solid content, while the 80:20 ratio resulted in the best viscosity. Furthermore, the 40:60 ratio produced the most favorable particle board in terms of mechanical properties, density, thickness, swelling, and water absorption. Consequently, the starch extracted from camote and cassava peels holds promise as a potential source for bio-based adhesives following appropriate chemical modification.

polymer science

What problem does this paper attempt to address?

This paper aims to address the environmental and health issues associated with traditional synthetic wood adhesives. Specifically, traditional adhesives such as formaldehyde and polymeric diphenylmethane diisocyanate (PMDI) are classified as carcinogenic, toxic, and unsustainable. These issues have prompted researchers to seek eco-friendly and renewable resource-based bio-based wood adhesives. To this end, the study focuses on extracting starch from sweet potato (camote) and cassava peels and preparing bio-based wood adhesives through chemical modification (e.g., oxidation).

The main objectives of the study include:
1. Determining the percentage yield of starch extracted from sweet potato and cassava peels.
2. Measuring the yield of chemically modified starch.
3. Characterizing and comparing the performance of different ratios of sweet potato and cassava starch as chemically modified bio-based wood adhesives (CMBWA) through indicators such as solid content, viscosity, and glass transition temperature (Tg).
4. Producing particleboard using CMBWA made from different ratios of sweet potato and cassava starch, and analyzing its mechanical properties (e.g., compressive strength, modulus of rupture (MOR)) and physical properties (e.g., density, water absorption, and thickness swelling).
5. Determining the optimal ratio of sweet potato to cassava starch to achieve the best-performing bio-based wood adhesive.

Through this research, the paper hopes to develop an eco-friendly, sustainable, and high-performance bio-based wood adhesive, thereby reducing reliance on traditional synthetic adhesives and minimizing negative impacts on the environment and health.