Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

New strategy and easy fabrication of solid-state supercapacitor based on polypyrrole and nitrile rubber.

The fabrication of bowl-shaped polypyrrole/graphene nanostructural electrodes and its application in all-solid-state supercapacitor devices

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Tailorable Polypyrrole Nanofilms with Exceptional Electrochemical Performance for All-Solid-State Flexible Supercapacitors

A Porous and Interconnected Polypyrrole Film with High Conductivity and Ion Accessibility As Electrode for Flexible All‐Solid‐State Supercapacitors

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

Design and fabrication of an all-solid-state polymer supercapacitor with highly mechanical flexibility based on polypyrrole hydrogel.

Significantly enhanced robustness and electrochemical performance of flexible carbon nanotube-based supercapacitors by electrodepositing polypyrrole

Pulse‐potential Electrochemistry to Boost Real‐life Application of Pseudocapacitive Dual‐doped Polypyrrole

Highly Flexible, Freestanding Supercapacitor Electrode with Enhanced Performance Obtained by Hybridizing Polypyrrole Chains with MXene

Design and fabrication of high performance flexible supercapacitor with polypyrrole@carbon fiber yarn electrode and redox active dopants

Synthesis and Electrochemical Characterization of Nitrate-Doped Polypyrrole/Ag Nanowire Nanorods as Supercapacitors

Engineering the Volumetric Effect of Polypyrrole for Auto-Deformable Supercapacitor

Nanostructured Polypyrrole As a Flexible Electrode Material of Supercapacitor

Flexible Electrochemical Capacitors Based on Polypyrrole/carbon Fibers Via Chemical Polymerization of Pyrrole Vapor

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

Synthesis of polypyrrole/nitrogen-doped porous carbon matrix composite as the electrode material for supercapacitors

Bicontinuous Nanotubular Graphene–polypyrrole Hybrid for High Performance Flexible Supercapacitors

Facile decoration of polypyrrole nanoparticles onto graphene nanosheets for supercapacitors

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Facile, Scalable, Eco-Friendly Fabrication of High-Performance Flexible All-Solid-State Supercapacitors