Abstract:Statement of problem: The outcome of photopolymerized 3-dimensional (3D) printing is influenced by the methods used for postprinting cleaning, yet information on postprinting cleaning is sparse. Purpose: The purpose of this in vitro study was to assess the cleaning efficiency and surface and mechanical properties of 3D printed resin according to postprinting cleaning methods. Material and methods: Specimens were fabricated from a 3D model using resin materials (NextDent C&B MFH and DIOnavi-P. MAX) and were tested for postprinting cleaning methods for 5 minutes with isopropyl alcohol, isopropyl alcohol + ultrasonic, ethyl alcohol, ethyl alcohol + ultrasonic, and ultrasonic alone. Postpolymerization was followed for 5 minutes. The cleaning efficiency, microcomputed tomography (µCT), surface roughness, Vickers hardness, and flexural strength of the specimens were evaluated. The 1-way ANOVA test was performed after considering normality. A post hoc analysis with Bonferroni was also performed (α=.008 or.005). Results: Ultrasonic in addition to cleaning solutions significantly improved the cleaning efficiency in NextDent C&B MFH specimens (P<.005), whereas ultrasonic did not affect the efficiency in DIOnavi-P. MAX specimens. No significant differences were found in surface roughness by postprinting cleaning methods in either NextDent C&B MFH or DIOnavi-P. MAX (P>.005). No significant changes in surface hardness were observed by postprinting cleaning methods (P>.008). In the NextDent C&B MFH, ethyl alcohol + ultrasonic significantly decreased the flexural strength (P<.005). There were no significant differences in the flexural strength in the DIOnavi-P. MAX (P>.005). Conclusions: Ethyl alcohol was comparable with isopropyl alcohol for use as a postprinting cleaning solution for both NextDent C&B MFH and DIOnavi-P. MAX. The addition of ultrasonic to cleaning solutions should be applied with caution. These findings suggest that different postprinting cleaning methods can be recommended depending on the 3D printed resin materials.

Green Cleaning of 3D-Printed Polymeric Products by Micro-/Nano-Bubbles

Experimental Analysis of Initiation Mechanism of Bubbles in Ultra-Clean Pumps Circulating Hydrogen Peroxide

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Removal of micron-scale microplastic particles from different waters with efficient tool of surface-functionalized microbubbles

Environment-friendly surface cleaning using micro-nano bubbles

Surface Cleaning of Oil Contaminants Using Bulk Nanobubbles

Quantifying instant water cleaning efficiency using zinc oxide decorated complex 3D printed porous architectures

Cleaning with Bulk Nanobubbles.

Impact of Water Purity and Oxygen Content in Gas Phase on Effectiveness of Surface Cleaning with Microbubbles

Degreasing of Solid Surfaces by Microbubble Cleaning

Eco-friendly textile cleaning: Micro-nano bubbles technology for enhanced efficiency and sustainability

Acoustic-Controlled Bubble Generation and Fabrication of 3D Polymer Porous Materials

Washing performance of microbubbles on porous media

Antifouling and antimicrobial 3D printed small household appliances with incorporation of zwitterions and quaternary ammonium compounds

Superaerophobic polymer objects prototyped via liquid crystal display (LCD)-based 3D printing: one-step post-surface-treatment and application in underwater bubble manipulation

Efficient Removal of Organic Contaminants from Aqueous Solution by Highly Compressible Reusable Three-Dimensional Printing Sponges

Cleaning using nanobubbles: defouling by electrochemical generation of bubbles.

[Insights into the Applications of 3D Bioprinting for Bioremediation Technologies].

3D Printing of Superhydrophobic Objects with Bulk Nanostructure

Removing proteins or bacteria on a tilted surface using air bubbles

Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins