Abstract:Composites of Cr0.2Fe0.2Mn0.2Ni0.2Co0.2)3O4 (CFMNC) and reduced graphene oxide (rGO) were prepared by solvothermal method‐assisted heat treatment as a novel sodium‐ion batteries anode material. Entropy stabilisation effects enable CFMNC/rGO to exhibit excellent cycling stability (capacity decay rate of 0.05% cycle−1 at100 mA g−1 over 200 cycles) and rate capability (returned to 200 mA g−1 with almost 100% capacity retention). While conventional oxides have a high theoretical specific capacity, they also suffer from severe volume expansion during cycling, which seriously affects the stability of the structure. Hence, high‐entropy oxide nanoparticles (Cr0.2Fe0.2Mn0.2Ni0.2Co0.2)3O4, CFMNC) were synthesized and uniformly dispersed on reduced graphene oxide(rGO) carriers using a solvothermal method‐assisted heat treatment as a novel sodium‐ion batteries anode material. The introduction of rGO does not change the crystal structure of CFMNC material, while loading CFMNC into the sheet structure of rGO forms a highly conductive structure, which promotes electron/ion transfer. The high specific surface area is conducive to the full infiltration of the electrode material with the electrolyte, and improve the electrode activity. The random distribution of individual metal ions in CFMNC makes itself have a strong entropy‐driven structural stabilization effect to achieve the cycling stability: 149.1 mAh g−1 can be maintained at 100 mA g−1 over 200 cycles with capacity decay rate of 0.05 % cycle−1. CFMNC/rGO also have excellent rate capability (76.1 mAh g−1at 3000mAg−1, and returned to 153.6 mAh g−1at 200 mA g−1 with almost 100 % capacity retention). Therefore, the composite is considered to offer research potential for the design of high‐performance anode materials through entropy‐driven strategies.

Reduced graphene oxide thin layer induced lattice distortion in high crystalline MnO2 nanowires for high-performance sodium- and potassium-ion batteries and capacitors

Ultrafine Tin Oxide on Reduced Graphene Oxide As High-Performance Anode for Sodium-Ion Batteries

In Situ Synthesis of MnO/C Nanoparticles Anchored on Reduced Graphene Oxide As High-Performance Zinc Ion Battery Cathode with Enhanced Zinc Storage Performance

A novel synthesis of Nb2O5@rGO nanocomposite as anode material for superior sodium storage

Reduced graphene oxide encapsulated MnO microspheres as an anode for high-rate lithium ion capacitors

Unique Amorphous Manganese Oxide/rgo Anodes for Lithium-Ion Batteries with High Capacity and Excellent Stability

Molybdenum Disulfide/Reduced Graphene Oxide Nanocomposite with Expanded Interlayer Spacing for Sodium Ion Batteries

NiS2 wrapped into graphene with strong Ni-O interaction for advanced sodium and potassium ion batteries

Ultra-fine SnO2 nanocrystals anchored on reduced graphene oxide as a high-performance anode material for sodium-ion batteries

Understanding the High‐Performance Anode Material of CoC2O4⋅2 H2O Microrods Wrapped by Reduced Graphene Oxide for Lithium‐Ion and Sodium‐Ion Batteries

Synergistic & gamma;-In2Se3@rGO Nanocomposites with Beneficial Crystal Transformation Behavior for High-Performance Sodium-Ion Batteries

Preparation and sodium storage properties of spinel‐type (Cr0.2Fe0.2Mn0.2Ni0.2Co0.2)3O4/rGO

Microwave-assisted hydrothermal synthesis of three-dimensional NbOPO4-reduced graphene oxide-carbon nanotube composite for high performance sodium-ion battery anode

Reduced Graphene Oxide/Tin-Antimony Nanocomposites as Anode Materials for Advanced Sodium-Ion Batteries.

A Strongly Coupled CoS2/ Reduced Graphene Oxide Nanostructure As an Anode Material for Efficient Sodium-Ion Batteries

Reduced Graphene Oxide-Incorporated SnSb@CNF Composites as Anodes for High-Performance Sodium-Ion Batteries

Reduced Graphene Oxide Wrap Buffering Volume Expansion of Mn2SnO4 Anodes for Enhanced Stability in Lithium-Ion Batteries.

A Reduced Graphene Oxide/Disodium Terephthalate Hybrid as a High-Performance Anode for Sodium-Ion Batteries

Monoclinic Cu3(OH)2V2O7·2H2O nanobelts/reduced graphene oxide: A novel high-capacity and long-life composite for potassium-ion battery anodes

The construction of CuCo2O4/N-doped reduced graphene oxide hybrid hollow spheres as anodes for sodium-ion batteries

Bi2S3 Nanorods Bonding on Reduced Graphene Oxide Surface As Advanced Anode Materials for Sodium‐Ion Batteries