Abstract:With the growing demand for FEL light sources, cost issues are being reevaluated. To make the machines more compact, higher frequency room temperature linacs are being considered, specifically ones using C-band (5.7 GHz) rf technology, for which 40 MV/m gradients are achievable. In this paper, we show that an X-band (11.4 GHz) linac using the technology developed for NLC/GLC can provide an even lower cost solution. In particular, stable operation is possible at gradients of 100 MV/m for single bunch operation and 70 MV/m for multibunch operation. The concern, of course, is whether the stronger wakefields will lead to unacceptable emittance dilution. However, we show that the small emittances produced in a 250 MeV, low bunch charge, LCLS-like S-band injector and bunch compressor can be preserved in a multi-GeV X-band linac with reasonable alignment tolerances. The successful lasing and operation of the LCLS [1] has generated world-wide interest in X-ray FELs. The demand for access to such a light source by researchers eager to harness the capabilities of this new tool far exceeds the numbers that can be accommodated, spurring plans for additional facilities. Along with cost, spatial considerations become increasingly important for a hard X-ray machine driven by amore » multi-GeV linac. The consequent need for high acceleration gradient focuses attention on higher frequency normal conducting accelerator technology, rather than the superconducting technology of a soft X-ray facility like FLASH. C-band technology, such as used by Spring-8, is a popular option, capable of providing 40 MV/m. However, more than a decade of R&D toward an X-band linear collider, centered at SLAC and KEK, has demonstrated that this frequency option can extend the gradient reach to the 70-100 MV/m range. The following design and beam dynamics calculations show an X-band linac to be an attractive choice on which to base an X-ray FEL.« less

Feasibility study of the shorter focusing lattice for soft X-ray undulator line at PAL-XFEL

Improvement of the crossed undulator design for effective circular polarization control in X-ray FELs

Enhanced X‐ray free‐electron laser performance with optical klystron and helical undulators

Study on the planar undulator scheme with focusing properties for pku-fel *

Feasibility study of a hard x-ray FEL oscillator at 3 to 4 GeV based on harmonic lasing and transverse gradient undulator

Circular polarization control for the European XFEL in the soft X-ray regime

Generation and use of coherent x-ray beams at future SKIF storage ring

Attosecond x-ray free-electron lasers utilizing an optical undulator in a self-selection regime

Flexible multi-bunch-length operation for continuous-wave x-ray free-electron lasers

Ultra-Compact Ka-band linearizer for the Ultra-Compact X-Ray Free-Electron Laser at UCLA

FEL Polarization Control Studies on Dalian Coherent Light Source

Systematical design and three-dimensional simulation of X-ray FEL oscillator for Shanghai Coherent Light Facility

A Compact X-Band Linac for an X-Ray FEL

Automatic adjustment of undulator optics for FELs

High Efficiency, Multi-Terawatt X-ray free electron lasers

Compact Free-Electron Lasers Using Laser Driven Cascaded Dielectric Nano-Pillar Arrays

Status and future of the soft X-ray free-electron laser beamline at the SHINE

Development of an X-ray ionization beam position monitor for PAL-XFEL soft X-rays

Demonstration of full polarization control of soft X-ray pulses with Apple X undulators at SwissFEL using recoil ion momentum spectroscopy

Start-to-End Simulations for an X-Ray FEL Oscillator at the LCLS-II and LCLS-II-HE

Microbunch rotation in an x-ray free-electron laser using a first-order achromatic bend