Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

An Eco‐Friendly Passivation Strategy of Resveratrol for Highly Efficient and Antioxidative Perovskite Solar Cells

An eco-friendly passivation strategy of resveratrol for highly efficient and antioxidative perovskite solar cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Defect Passivation and Electrical Conductivity Enhancement in Perovskite Solar Cells Using Functionalized Graphene Quantum Dots

Synergetic Excess PbI2 and Reduced Pb Leakage Management Strategy for 24.28% Efficient, Stable and Eco‐Friendly Perovskite Solar Cells

Defect Passivation by Natural Piperine Molecule Enabling for Stable Perovskite Solar Cells with Efficiencies over 23%

Synergistic Passivation Strategies for Enhancing Efficiency and Stability of Perovskite Solar Cells

Learning From Plants: Lycopene Additive Passivation toward Efficient and "Fresh" Perovskite Solar Cells with Oxygen and Ultraviolet Resistance

Defect passivation by nontoxic biomaterial yields 21% efficiency perovskite solar cells

Passivation of perovskite surfaces using 2-hydroxyacetophenone to fabricate solar cells with over 20.7% efficiency under air environment

Radical reinforced defect passivation strategy for efficient and stable MAPbI 3 perovskite solar cells fabricated in air using a green anti-solvent process

Synergistic Full‐Scale Defect Passivation Enables High‐Efficiency and Stable Perovskite Solar Cells

Enhancing Efficiency and Stability of Perovskite Solar Cells via Photosensitive Molecule-Assisted Defect Passivation

Enhancing Performance and Stability of Perovskite Solar Cells through Surface Defect Passivation with Organic Bidentate Lewis Bases

Defect-Passivation Using Organic Dyes for Enhanced Efficiency and Stability of Perovskite Solar Cells

Synergistic Effect of Anti‐solvent and Component Engineering for Effective Passivation to Attain Highly Stable Perovskite Solar Cells

Efficient and Stable Tin‐Lead Mixed Perovskite Solar Cells Using Post‐Treatment Additive with Synergistic Effects

Synergistic Passivation via Lewis Coordination and Electrostatic Interaction for Efficient Perovskite Solar Cells

Additive engineering enabled non-radiative defect passivation with improved moisture-resistance in efficient and stable perovskite solar cells

3-Ethoxy-4-hydroxybenzadehyde Surface Passivation of Perovskite Films Enables Exceeding 24% Efficiency in Solar Cells