Abstract:The development of high-efficiency microwave absorbers for C and X bands still remains a challenge, limiting the settlement of corresponding electromagnetic pollution and radar stealth. In this work, a reduced graphene oxide (RGO)/Cu/Fe3O4 composite is successfully proposed by a one-step solvothermal method with a GO dispersion content of 5 mL, where Fe3O4 exhibits high magnetic loss from natural resonance at the C band, and Cu nanorods and RGO are introduced as dual conductive phases to produce suitable dielectric properties by regulating the percolation threshold. The results show that the existence of Cu nanorods significantly reduces the conductivity and dielectric loss of the composites, optimizing the coordination of attenuation capacity and impedance matching in the C and X bands. Consequently, the obtained RGO/Cu/Fe3O4 composite shows outstanding microwave absorption performance with the maximum effective absorption bandwidth (EAB) value of 5.2 GHz at a thin thickness of 3.1 mm, which covers 84% of the C band and 46% of the X band (4.64–9.84 GHz). The performance is superior to the vast majority of previous absorbers in the corresponding bands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10110.N2 adsorption–desorption isotherms of S0, S5, and S10; hysteresis loops of S0, S5, and S10; ε′, ε″, μ′, and μ″ of S5 with different filler loadings; two-dimensional (2D) plots of RL values versus frequency for S5 with filler loadings of 55, 65, and 75 wt %; conductivities of S0, S5, and S10; XRD patterns and SEM images of the samples with different Cu contents; ε″ values and conductivities of the samples with different Cu contents; 2D plots of RL values versus frequency for Cu0, Cu3, and Cu5; curves of the theoretical quarter-wavelength matching thickness (dm), and RL and Z values under given thicknesses from 2.5 to 3.5 mm over 2–18 GHz for Cu0, Cu3, and Cu5 (PDF)This article has not yet been cited by other publications.

Quantitative Evaluation of Loss Capability for In Situ Conductive Phase Enhanced Microwave Absorption of High‐Entropy Transition Metal Oxides

Evaluation and Failure Mechanism of High‐Temperature Microwave Absorption for Heterogeneous Phase Enhanced High‐Entropy Transition Metal Oxides

Design of a High-Efficient Metamaterial X-band Absorber Composed of a Dielectric Cylinder Combined with a Thin Magnetic Cylinder Unit

Rapid Synthesis and Enhanced Microwave Absorption of Carbon-Supported High-Entropy Metal Oxide

Microwave Absorption Performance of 2D Iron-Quinoid MOF

Regulating Percolation Threshold via Dual Conductive Phases for High-Efficiency Microwave Absorption Performance in C and X Bands

Microstructure Design of Magnetic-Dielectric MCHS@Co@CNTs Composites with Tunable Conductive Loss for High-Performance Microwave Absorption

Microwave Absorption Performance of One-dimensional Mixed Metal Oxide Nanocomposite

High-performance Microwave Absorbers Using a Simple Double-Layer Absorbing Structure to Improve Impedance Mismatching

Hierarchical and Orderly Surface Conductive Networks in Yolk–Shell Fe3O4@C@Co/N‐Doped C Microspheres for Enhanced Microwave Absorption

The Cation Exchange Driving Multi-Phase Regulation in Co7Fe3/Co@NC for Enhanced Broadband Electromagnetic Wave Absorption

Achieving ultra-broadband electromagnetic wave absorption in high-entropy transition metal carbides (HE TMCs)

Electromagnetic Wave Absorption Performance of FeCoNiMn0.5Al0.2 High Entropy Alloys Governed by Nanocrystal Evolution

Synergistic Dielectric–Magnetic Enhancement via Phase‐Evolution Engineering and Dynamic Magnetic Resonance

Precursor-directed Synthesis of Porous Cobalt Assemblies with Tunable Close-Packed Hexagonal and Face-Centered Cubic Phases for the Effective Enhancement in Microwave Absorption

Multiphase interface engineering based on porous manganous oxide toward broad-band microwave absorption

Hierarchical porous molybdenum carbide synergic morphological engineering towards broad multi-band tunable microwave absorption

A Versatile Strategy Towards Magnetic/dielectric Porous Heterostructure with Confinement Effect for Lightweight and Broadband Electromagnetic Wave Absorption

Phase interface manipulation by adjusting atomic ordering in metal-organic framework to facilitate microwave absorption

Mixed-dimensional conductive network heterostructures: An effective interfacial strategy to aggrandize dielectric loss for designing microwave absorbers

Synergetic Dielectric and Magnetic Losses of a Core–Shell Co/MnO/C Nanocomplex toward Highly Efficient Microwave Absorption