Abstract:Development of high energy conversion and environment-friendly proton exchange membranes is important for the commercial exploitation of fuel cell technologies. The performance of proton exchange membrane fuel cells (PEMFCs) is highly dependent on the physico-chemical properties of the proton exchange membranes. Thus, we have developed the sulfonated poly(vinyl alcohol) (sPVA) membranes incorporated with 1.5 mass% of sulfonated nano-silica and then crosslinked with different crosslinkers, such as formaldehyde, glutaraldehyde, poly(styrene sulfonic acid-co-malic acid) (PSSA-MA) and tetraethyl orthosilicate (TEOS). The physico-chemical properties of the resulting crosslinked membranes were investigated using Fourier transform infrared spectrometer (FT-IR), wide-angle X-ray diffractometer (WAXD), atomic force microscope (AFM), differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA). The mechanical properties of the membranes were studied using universal testing machine (UTM). The proton conductivity and dielctric properties of the membranes were measured using a high precession impedance analyzer. The water uptake ratio, swelling ratio and ion exchange capacity of the membranes were evaluated and discussed based on their molecular structures. The fuel cell performance of the membranes was determined at 80 °C using a fuel cell workstation. Among the membranes developed, TEOS crosslinked composite membrane (sPVA-Si/TEOS) demonstrated the highest mechanical strength, ion exchange capacity and proton conductivity. The ion exchange capacity and proton conductivity were found to be 1.1 meq g-1 and 0.56 S cm-1, respectively. The same membrane demonstrated the highest power density of 0.70 W cm-2 at current density of 1.25 A cm-2. These data were compared with the commercially available Nafion® 117 and 212 membranes. The sPVA-Si/TEOS composite membrane showed better performance than those of Nafion® 117 and 212 membranes with greater economic viability. Thus, TEOS could be of potential crosslinker for sulfonated poly (vinyl alcohol)-silica incorporated hydrophilic membrane and could be employed as a promising candidate for fuel cell application.

Synthesis, Characterization and Optimization of Sulfonated Poly-Ether-Ether-Ketone (sPEEK)/Functionalized Carbon Nanotubes (c-CNTs) Nanocomposite Membranes for Fuel Cell Application

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Design and Development of Copper Trimesic Acid Anchored sPEEK/Polyimide Composite Membranes for Fuel Cell Applications

Synthesis of cross‐linked composite membranes by functionalization of single‐walled carbon nanotubes with 1,4‐butane sultone and sulfanilic acid for fuel cell

Friedel-Crafts self-crosslinking of sulfonated poly(etheretherketone) composite proton exchange membrane doped with phosphotungstic acid and carbon-based nanomaterials for fuel cell applications

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Carbonaceous nanofiber-supported sulfonated poly(ether ether ketone) membranes for fuel cell applications

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Quaternized poly(styrene ethylene butylene poly styrene)/multiwalled carbon nanotube composites for alkaline fuel cell applications

Strengthen the performance of sulfonated poly(ether ether ketone) as proton exchange membranes with phosphonic acid functionalized carbon nanotubes

Development of sulfonic acid–functionalized tetraethyl orthosilicate derivative cross-linked with sulfonated PEEK membranes for fuel cell applications

Composite Membranes Based on a Novel Benzimidazole Grafted PEEK and SPEEK for Fuel Cells

SPEEK and SPPO Blended Membranes for Proton Exchange Membrane Fuel Cells

Modified Nanocrystal Cellulose/fluorene-Containing Sulfonated Poly(ether Ether Ketone Ketone) Composites for Proton Exchange Membranes

Development of robust proton exchange membranes using sPVA-Silica composite with different crosslinkers and evaluation of their fuel cell performance