Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

Numerical study and parameter prediction of a full-free flexible flament in wakes of flapping wing

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

NUMERICAL INVESTIGATION OF UNSTEADY FLOWS PAST FLAPPING WINGS WITH IMMERSED BOUNDARY-LATTICE BOLTZMANN METHOD

On the Propulsive Performance of Tandem Flapping Wings with A Modified Immersed Boundary Method

Analysis of nonlinear aerodynamic performance and passive deformation of a flexible flapping wing in hover flight

Numerical Simulation of 2-D Flapping Foil by Using Immersed-Boundary Method

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Study of Flapping Filaments Using the Immersed Boundary-Lattice Boltzmann Method

Numerical simulations of the flapping of a three-dimensional flexible plate in uniform flow

Vortex Induced Vibration of a Circular Cylinder with a Filament by Using Penalty Immersed Boundary Method

Numerical simulation of Micro Air Vehicles with membrane wings

Simulation of flexible filaments in a uniform flow by the immersed boundary method

Numerical Investigation of the Dynamics of A Flexible Filament in the Wake of Cylinder

Strongly coupled fluid–structure interaction analysis of aquatic flapping wings based on flexible multibody dynamics and the modified unsteady vortex lattice method

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching

Deformable Blade Element and Unsteady Vortex Lattice Fluid-Structure Interaction Modeling of a 2D Flapping Wing

Fluid-structure Analysis of Flapping-Wing Rotorcraft Considering Stiffness Influence

NUMERICAL STUDY ON THE EFFECT OF FLEXIBLITY OF A FLAPPING WING ON ITS AERODYNAMIC PERFORMANCE

Numerical study on the aerodynamic performance of the three-dimensional wing of a jellyfish-like flyer

Transferable Machine Learning Model for the Aerodynamic Prediction of Swept Wings

Numerical Study on Aerodynamic Performance of Flapping Wings