Abstract:In situ polymerization is proposed to design high ionic conductivity and good interface contact solid polymer electrolytes. The constructed LiFePO4 (LFP) || Li cells with elaborately designed electrolyte exhibit 100% capacity retention after 100 cycles at −10 °C. The electrochemical stability of electrolyte is further enhanced by cyanoacrylate decoration. And the constructed LiCoO2 (LCO) || Li cell with modified electrolyte shows 93% of capacity retention under 4.5 V cut‐off voltage after 200 cycles. Solid‐state electrolytes (SSE) exhibit great promise in enhancing the safety of Li metal batteries by replacing flammable liquid electrolytes. However, the practical application of SSE is hampered mainly due to the poor electrode–electrolyte interface, low ion conductivity, and inferior electrochemical stability. Herein, superior nonflammable solid polymer electrolytes are elaborately designed by in situ encapsulating succinonitrile (SN)‐based deep eutectic solvent (DES) into the ethoxylated trimethylolpropane triacrylate (ETPTA) matrix (DES‐ETPTA). Benefiting from strong polarity and high anti‐oxidation capability, as‐prepared DES‐ETPTA electrolyte shows high ionic conductivity (9.55 × 10−4 S cm−1 at 30 °C), high Li+ transference number (0.68), and good electrochemical stability. As a result, the assembled LiFePO4 || Li full cells based on the designed DES‐ETPTA electrolyte deliver a high reversible capacity and capacity retention at −10 °C and room temperature. Furthermore, considering the compatibility with high‐voltage layered oxide cathode, the electrochemical stability of the ETPTA is further improved through the decoration of cyanoacrylate (CA) with strong electron‐withdrawing characteristic of C≡N. Consequently, the constructed 4.5 V LiCoO2 || Li full cells using DES‐ETPTA‐CA electrolyte deliver a high reversible capacity of 144 mAh g−1 and a superior retention rate of 93% after 200 cycles at 0.5 C. This work paves a new pathway to design high‐safety and high‐voltage solid polymer electrolytes for lithium metal batteries.

Deep‐Eutectic‐Solvent‐Based Self‐Healing Polymer Electrolyte for Safe and Long‐Life Lithium‐Metal Batteries

A siloxane-based self-healing gel electrolyte with deep eutectic solvents for safe quasi-solid-state lithium metal batteries

Polymerizable Deep Eutectic Solvent-Based Polymer Electrolyte for Advanced Dendrite-Free, High-Rate, and Long-Life Li Metal Batteries

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Self-Healing Polymer Electrolyte for Dendrite-Free Li Metal Batteries with Ultra-High-Voltage Ni-Rich Layered Cathodes

Ultrathin and Non‐Flammable Dual‐Salt Polymer Electrolyte for High‐Energy‐Density Lithium‐Metal Battery

In situ formed self-healable quasi-solid hybrid electrolyte network coupled with eutectic mixture towards ultra-long cycle life lithium metal batteries

Ionic Liquid-Immobilized Polymer Gel Electrolyte with Self-Healing Capability, High Ionic Conductivity and Heat Resistance for Dendrite-Free Lithium Metal Batteries

Thermal stable poly-dioxolane based electrolytes via a robust crosslinked network for dendrite-free solid-state li-metal batteries

Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries

In-Situ Polymerization Induced Phase Separation to Develop High Performance Self-Healable Polymeric Electrolytes for Lithium Metal Battery

Non-flammable liquid polymer-in-salt electrolyte enabling secure and dendrite-free lithium metal battery

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

In-Situ synthesized Non-flammable gel polymer electrolyte enable highly safe and Dendrite-Free lithium metal batteries

Rapid Thermal Shutdown of Deep‐Eutectic‐Polymer Electrolyte Enabling Overheating Self‐Protection of Lithium Metal Batteries

A Highly Stable and Non-Flammable Deep Eutectic Electrolyte for High-Performance Lithium Metal Batteries

A Locally Solvent-Tethered Polymer Electrolyte for Long-Life Lithium Metal Batteries

Self-healing polymer-based electrolyte induced by amorphous three-dimensional carbon for high-performance solid-state Li metal batteries

Self‐Healing and Recyclable Polymer Electrolyte Enabled with Boronic Ester Transesterification for Stabilizing Ion Deposition

Ab Initio Molecular Dynamics Study on Self-Healing Solid Polymer Electrolyte for Lithium Metal Batteries

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries