Abstract:ABSTRACT Saline aquifers, among other potential CO2 storage formations, have been proven to offer the highest storage capacity necessary for commercial-scale carbon capture and storage (CCS) projects. They are an ideal target for emission reduction from coal-fired power plants in the sourcesink model. However, unlike hydrocarbon reservoirs which are typically well developed, these deep formations face the challenge of characterization due to a lack of data and their uncertainty. Spatial reservoir information is critical in understanding CO2 injectivity, plume dynamics, and pressure management during and after injection operations. In this study, we combine geologic and dynamic data from the Shenhua CCS Demonstration Project in the Ordos Basin, China to provide an improved explanation for the pressure behavior and interesting injectivity at the site as well as presenting a risk assessment study of long-term storage safety. We extend the work of Nguyen et al. (2017a, b) in that a system of interconnected meandering channels are incorporated into our geologic model to account for the pore volume needed to allow high injectivity. CO2 injection simulations are carried out by varying geologic and rock/fluid parameters to generate scenarios that offer a better understanding of the subsurface spatial heterogeneity which contributed to our observed behavior. Simulation results suggest that the lateral extent of conceptual fluvial channels may not be as extensive as previously thought since the pressure front travels faster than our CO2 plume, resulting in minimal pressure buildup at the bottom-hole level. Our study also finds that the injection well may have penetrated a sandbody with interconnected permeability which contradicts the notion in previous work that a high permeability area to the Northwest of the injection well may be the cause of low-pressure buildup. Injection rate allocation is an important parameter in explaining the bottom-hole pressure (BHP) response at the injection well. Our models also provide a range of scenarios with the target 300,000 tons of CO2 being successfully injected into 5 layers of saline aquifers, with the sandstone Liujiagou formation receiving most of the injection. Risk assessment based on these scenarios honoring historical injection data suggests that there is a low probability of CO2/brine leakage through legacy wellbores in the area, including the injection and two monitoring wells.

Assessing the potential for CO 2 storage in shallow coal seams using gas geochemistry: A case study from Qinshui Basin, North China

Strategic and geodynamic analyses of geo-sequestration of co2 in china offshore sedimentary basins1)

Potential for CO2 storage in shale basins in China

CO2 storage in coal to enhance coalbed methane recovery: a review of field experiments in China

Experimental study of CO2–brine–rock interaction during CO2 sequestration in deep coal seams

Evaluation of carbon dioxide geological sequestration potential in coal mining area

Experimental study of physical-chemical properties modification of coal after CO2 sequestration in deep unmineable coal seams: Original Research Article: Experimental study of physical-chemical properties modification of coal after CO2 sequestration

Assessment of in‐situ CO2 Sequestration Potential and Enhanced Coalbed Methane (ECBM) Production of Continental Coal‐Bearing Basins in China

The effects of supercritical CO2 on the seepage characteristics and microstructure of water-bearing bituminous coal at in-situ stress conditions

Analysis of dynamic characteristics and influencing factors of CO2 low-permeability coal reservoir sequestration

Micro-pilot test for enhanced coalbed methane recovery by injecting carbon dioxide in south part of Qinshui Basin

Feasibility Analyses and Prospects of CO2 Geological Storage by Using Abandoned Shale Gas Wells in the Sichuan Basin, China

Influence Factors and Feasibility Evaluation on Geological Sequestration of CO2 in Coal Seams: A Review

Joint Monitoring of CO2-ECBM Based on Multiple Geophysical Methods: A Case Study of Shizhuang Town, Shanxi Province, China

Effective means to alleviate the greenhouse effect: case study of history match simulations on a brief CO2 injection into less-deep low-rank coal seams

Assessment of CO 2 storage potential in high water-cut fractured volcanic gas reservoirs—Case study of China's SN gas field

Influence of supercritical CO2-H2O-caprock interactions on the sealing capability of deep coal seam caprocks related to CO2 geological storage: A case study of the silty mudstone caprock of coal seam no. 3 in the Qinshui Basin, China

Preliminary Environmental Risk Assessment Study Using US DOE’s National Risk Assessment Partnership on Leakage through Legacy Wells at the Shenhua CCS Demonstration Project

Geomechanical risk and mechanism analysis of CO2 sequestration in unconventional coal seams and shale gas reservoirs

Experimental study on methane adsorption and time-dependent dynamic diffusion coefficient of intact and tectonic coals: Implications for CO2-enhanced coalbed methane projects

Potential assessment of CO2 source/sink and its matching research during CCS process of deep unworkable seam