Trends of the low-NO and high-burnout combustion characteristics in a cascade-arch, W-shaped flame furnace regarding with the staged-air angle

Jialin Wang,Min Kuang,Xiaojuan Zhao,Haiqian Wu,Shuguang Ti,Chuyang Chen,Long Jiao
DOI: https://doi.org/10.1016/j.energy.2020.118768
IF: 9
2020-12-01
Energy
Abstract:<p>For a cascade-arch-firing low-NO<sub><em>x</em></sub> and high-burnout configuration (CLHC) designated for solving the incompatible problem of strengthened low NO<sub><em>x</em></sub> combustion and good burnout in W-shaped flame furnaces, numerical simulations verified by real-furnace results of a 600 MW<sub>e</sub> furnace with the multiple-injection multiple-staging combustion technology (MIMSCT), were performed to evaluate trends of the CLHC's in-furnace flow field, combustion, and NO<sub><em>x</em></sub> production at different staged-air angles of <em>θ =</em> 15°, 20°, 25°, and 30°. The flow-field symmetry and combustion performance first improved and then worsened with <em>θ</em>, generating a same change trend in the residual O<sub>2</sub> at the furnace outlet, carbon content in fly ash, and emission levels of CO and NO<sub><em>x</em></sub>. The 20° setting finally established the optimal performance indexes labeled as NO<sub><em>x</em></sub> emissions of 669 mg/m<sup>3</sup> at 6% O<sub>2</sub> and carbon content in fly ash of 5.1%. In the NO<sub><em>x</em></sub> formation aspect along the flame travel in the CLHC, it was found that NO<sub><em>x</em></sub> was initially inhibited obviously in the preceding combustion stage but then surged in the primary combustion stage before finally reduced sharply by the reburning process. As a replacement of the prior MIMSCT, the CLHC achieved a strengthened low-NO<sub><em>x</em></sub> combustion performance with NO<sub><em>x</em></sub> reduced by 26% without affecting burnout. The prominent improvement was attributed to the combination of improving symmetrical combustion pattern, strengthening deep-air-staging conditions, lengthening flame travel by positioning hopper air, and introducing the flue gas recirculation and reburning process.</p>
energy & fuels,thermodynamics
What problem does this paper attempt to address?