Abstract:Objectives To investigate the wear resistance of conventional, CAD-milled and 3D-printed denture teeth in vitro with simulated aging. To use the collected data to train single time series sample model LSTM and provide proof of concept. Methods Six denture teeth materials (Three Conventional; Double-cross linked PMMA (G1), Nanohybrid composite (G2), PMMA with microfillers (G3), CAD-milled (G4), two 3D-printed teeth (G5, G6) (Total n = 60) underwent simulation for 24 and 48 months of linear reciprocating wear using a universal testing machine (UFW200, NeoPlus) under 49 N load, 1 Hz and linear stroke of 2 mm in an artificial saliva medium. Single samples were parsed through Long Short-Term Memory (LSTM) neural network model using Python. To determine minimal simulation times, multiple data splits for training were trialled (10/20/30/40%). Scanning electron microscopy (SEM) was performed for material surface evaluation. Results 3D printed tooth material (G5) had the lowest wear resistance (59 ± 35.71 μm) whereas conventional PMMA with microfillers (G3) shown the highest wear rate (303 ± 0.06 μm) after 48 months of simulation. The LSTM model successfully predicted up to 48 months wear using 30% of the collected data. Compared with the actual data, the model had a root-mean-square error range between 6.23 and 88.56 μm, mean-absolute-percentage-error 12.43-23.02% and mean-absolute-error 7.47-70.71 μm. SEM images revealed additional plastic deformations and chipping of materials, that may have introduced data artifacts. Conclusions 3D printed teeth materials showed the lowest wear out of all studied for 48 months simulation. LSTM model was successfully developed to predict wear of various denture teeth. The developed LSTM model have potential to reduce simulation duration and specimen number for wear testing of various dental materials, while potentially improving the accuracy and reliability of wear testing predictions. This work paves the way for generalized multi-sample models enhanced with empirical information.

Application of Machine Learning For Prediction Dental Material Wear

Prediction of wear of dental composite materials using machine learning algorithms

Prediction of mechanical properties of dental composite materials using machine learning algorithms

Dental Composite Performance Prediction Using Artificial Intelligence

Early Predicting Tribocorrosion Rate of Dental Implant Titanium Materials Using Random Forest Machine Learning Models

Development of predictive algorithms for the wear resistance of denture teeth materials

Analysis and prediction of erosion behavior of epoxy composites using statistical and machine learning techniques

Machine Learning Approaches for Predicting the Ablation Performance of Ceramic Matrix Composites

Development of machine learning models for the prediction of erosion wear of hybrid composites

DCP: Prediction of Dental Caries Using Machine Learning in Personalized Medicine

The Prediction of Wear Depth Based on Machine Learning Algorithms

Experimental Investigation of the Influence of Various Wear Parameters on the Tribological Characteristics of AZ91 Hybrid Composites and Their Machine Learning Modeling

Predicting the Tool Wear of a Drilling Process Using Novel Machine Learning XGBoost-SDA

Wear Performance Prediction of MWCNT-Reinforced AZ31 Composite Using Machine Learning Technique

Prediction of Wear Rate of Glass-Filled PTFE Composites Based on Machine Learning Approaches

Prediction of compressive strength and tensile strain of engineered cementitious composite using machine learning

Investigation of the Wear Behavior of AA6063/Zirconium Oxide Nanocomposites Using Hybrid Machine Learning Algorithms

Surface Wear Rate Prediction in Reinforced AA2618 MMC by Employing Soft Computing Techniques

Triboinformatics Approach for Friction and Wear Prediction of Al-Graphite Composites Using Machine Learning Methods

Optimized machine learning with hyperparameter tuning and response surface methodology for predicting tribological performance in bio‐composite materials