Abstract:Kinematic multi-sensor systems (MSS) describe their movements through six-degree-of-freedom trajectories, which are often evaluated primarily for accuracy. However, understanding their self-reported uncertainty is crucial, especially when operating in diverse environments like urban, industrial, or natural settings. This is important, so the following algorithms can provide correct and safe decisions, i.e. for autonomous driving. In the context of localization, light detection and ranging sensors (LiDARs) are widely applied for tasks such as generating, updating, and integrating information from maps supporting other sensors to estimate trajectories. However, popular low-cost LiDARs deviate from other geodetic sensors in their uncertainty modeling. This paper therefore demonstrates the uncertainty evaluation of a LiDAR-based MSS localizing itself using an inertial measurement unit (IMU) and matching LiDAR observations to a known map. The necessary steps for accomplishing the sensor data fusion in a novel Error State Kalman filter (ESKF) will be presented considering the influences of the sensor uncertainties and their combination. The results provide new insights into the impact of random and systematic deviations resulting from parameters and their uncertainties established in prior calibrations. The evaluation is done using the Mahalanobis distance to consider the deviations of the trajectory from the ground truth weighted by the self-reported uncertainty, and to evaluate the consistency in hypothesis testing. The evaluation is performed using a real data set obtained from an MSS consisting of a tactical grade IMU and a Velodyne Puck in combination with reference data by a Laser Tracker in a laboratory environment. The data set consists of measurements for calibrations and multiple kinematic experiments. In the first step, the data set is simulated based on the Laser Tracker measurements to provide a baseline for the results under assumed perfect corrections. In comparison, the results using a more realistic simulated data set and the real IMU and LiDAR measurements provide deviations about a factor of five higher leading to an inconsistent estimation. The results offer insights into the open challenges related to the assumptions for integrating low-cost LiDARs in MSSs.

Pose estimation and mapping based on IMU and LiDAR

Efficient LiDAR Odometry for Autonomous Driving.

LiDAR and Inertial Fusion for Pose Estimation by Non-linear Optimization

Pose Estimation Based on Bidirectional Visual–Inertial Odometry with 3D LiDAR (BV-LIO)

Empirical uncertainty evaluation for the pose of a kinematic LiDAR-based multi-sensor system

Tightly Coupled 3D Lidar Inertial Odometry and Mapping

An Efficient and Robust Tightly Coupled Framework for Lidar-IMU Localization and Mapping.

Pose, Velocity and Landmark Position Estimation Using IMU and Bearing Measurements

D-LIOM: Tightly-coupled Direct LiDAR-Inertial Odometry and Mapping

Enhanced Mobile Robot Odometry With Error Kalman Filtering Incorporating 3D Point Cloud Intensity

A Robust and Fast GNSS-Inertial-LiDAR Odometry With INS-Centric Multiple Modalities by IESKF

MOBILE LASER SCANNING WITH LOW-COST NAVIGATION SENSORS: COMPENSATING FOR LOW-GRADE IMU WITH DUAL-GNSS AND TIGHTLY-COUPLED LIDAR

Efficient pose and motion estimation of non-cooperative target based on LiDAR

Invariant Extended Kalman Filtering for Tightly Coupled LiDAR-Inertial Odometry and Mapping

MC2SLAM: Real-Time Inertial Lidar Odometry Using Two-Scan Motion Compensation

LiDAR-IMU Tightly-Coupled SLAM Method Based on IEKF and Loop Closure Detection

Multi-LIO: A Lightweight Multiple LiDAR-Inertial Odometry System

Robust LiDAR visual inertial odometry for dynamic scenes

Efficient Extrinsic Calibration of Multi-Sensor 3D LiDAR Systems for Autonomous Vehicles using Static Objects Information

IMU and Multiple RGB-D Camera Fusion for Assisting Indoor Stop-and-Go 3D Terrestrial Laser Scanning