Abstract:The HELIOS (High Efficiency Light Intensity Observation System) project addresses the issue of excessive brightness from LEO satellite constellations. The system aims to develop a reflectance model of a satellite prior to launch, enabling the validation of compliance with astronomer guidelines, which suggest a minimum magnitude of 7. This ensures that the constellation is not visible to the naked eye and does not excessively interfere with astronomical observations. Additionally, the reflectance model obtained can be used for attitude determination by comparing the light curves with those obtained from observations. This application extends to Space Traffic Management, debris reentry prediction, and active debris removal. The system utilizes a light source consisting of 14 high-power LEDs with different wavelengths that replicate the solar spectrum. The light is positioned on an arc and can slide along a rail, allowing sampling at various angles. The arc itself can rotate on its axis, enabling the placement of the light source at any point on the hemisphere. At the center of the hemisphere, a scaled 3D printed model of the satellite under study is placed, with surface finishes resembling the actual satellite. Creating models with varying levels of detail permits to assess their impact on the reflectance model. Finally, the robotic arm Arm4NDO (Arm For Near Distance Observations) permits the movement of a high-efficiency quantum camera mounted at its end across the entire hemisphere's surface for data acquisition. The camera records a video, stopping at points of interest for capturing frames. To strike a balance between continuous data acquisition and reasonable testing times, both the light source and capture points are positioned every 15° in elevation and azimuth. The initial test campaign aimed to determine optimal camera settings (exposure, aperture, and ISO) to achieve good model visibility and a dark background. Preliminary tests focused on Starlink's chassis and the most significant observation configurations. Frames of interest were extracted from the videos, and their luminous flux (sum of pixel intensity values) was derived. With the obtained data, curves normalized relative to the maximum were plotted, allowing for a comparison of flux variations among different configurations.

High Contrast Observations of Bright Stars with a Starshade

Overview and Reassessment of Noise Budget of Starshade Exoplanet Imaging

Starshade Exoplanet Data Challenge: What We Learned

Exoplanet Detection in Starshade Images

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities

Adaptive Optics Observations of Exoplanets, Brown Dwarfs, & Binary Stars

The High-Contrast Spectroscopy Testbed for Segmented Telescopes (HCST): New Wavefront Control Demonstrations

A new approach for the numerical calculation of diffraction patterns using starshades

Empirical Contrast Model for High-Contrast Imaging -- A VLT/SPHERE Case Study

Characterizing Earth Analogs in Reflected Light: Atmospheric Retrieval Studies for Future Space Telescopes

Improving VLT/SPHERE without additional hardware: Comparing quasi-static correction strategies

Towards Space-like Photometric Precision from the Ground with Beam-Shaping Diffusers

Reflectance characterization of Starlink-like satellite with HELIOS brightness testing facility

HD 209458 and the Power of the Dark Side

Star Watch Astrometry Probe

Fast-Cadence High-Contrast Imaging with Information Field Theory

Enhancing stellar spectroscopy with extreme adaptive optics and photonics

Demonstration of broadband contrast at 1.2 $λ$/D and greater for the EXCEDE Starlight Suppression System

First Light of the High Contrast Integral Field Spectrograph (HCIFS)

High contrast at small separation – II. Impact on the dark hole of a realistic optical set-up with two deformable mirrors