Experimental Studies on the Combustion Characteristics of Multisource Organic Solid Waste for Collaborative Disposal Using Municipal Solid Waste Incinerators

Xiaohui Zhuo,Mi Li,Qiang Cheng,Zixue Luo

DOI: https://doi.org/10.1021/acsomega.3c08369

IF: 4.1

2024-01-23

ACS Omega

Abstract:This study investigated the evolution of furnace conditions during the heat conversion process of multisource organic solid waste. To achieve this, combustion tests involving different sludge mixing ratios, variable load operation, and multisource organic solid waste collaborative disposal were performed on a 750 t/d new municipal solid waste incineration grate furnace. The test results revealed that as the sludge mixing ratios increased from 0 to 10 and 20%, the temperature level in the furnace...

chemistry, multidisciplinary

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve

This paper aims to study the combustion characteristics of multi-source organic solid waste in municipal solid waste incinerators. Specifically, the paper explores the following issues through experiments:

1. **Effect of sludge mixing ratio on combustion conditions in the furnace**:
- The study investigates the impact of different sludge mixing ratios (0%, 10%, 20%) on the temperature levels and NOx emissions in the furnace.
- The results show that as the sludge mixing ratio increases, the temperature levels in the furnace decrease, and NOx emissions increase.

2. **Combustion stability of sludge under low load conditions**:
- The combustion stability of sludge under low load conditions is poor, mainly due to its fluctuating calorific value and high moisture content.
- This leads to instability in the combustion process and fluctuations in furnace temperature.

3. **Effect of mixing multi-source organic solid waste on combustion conditions**:
- By mixing waste cloth strips and paper waste, the study examines the impact of these wastes on the temperature levels and NOx emissions in the furnace.
- The results indicate that after mixing waste cloth strips and paper waste, the temperature levels in the furnace rise, and NOx emissions also increase.

4. **Effect of sludge mixing on combustion conditions under different load conditions**:
- Under different load conditions (63 t/h, 70 t/h, 77 t/h), the study investigates the impact of sludge mixing on the temperature levels in the furnace.
- The results show that as the load increases, the temperature levels in the furnace rise, but under low load conditions, the combustion conditions deteriorate, and the furnace temperature is too low, affecting the stable operation of the boiler.

### Experimental Methods

- **Experimental Device**: A municipal solid waste incinerator (SGF-V) with a processing capacity of 750 tons/day was used, and the combustion conditions in the furnace were detected using a CCD camera and a spectrometer.
- **Experimental Design**: Combustion experiments were conducted under different sludge mixing ratios and different load conditions, and data such as temperature distribution and NOx emissions in the furnace were recorded.

### Main Conclusions

1. **Effect of sludge mixing ratio**:
- As the sludge mixing ratio increases, the average temperature in the furnace decreases, and NOx emissions increase.
- The addition of sludge affects the stable operation of the furnace under low load conditions. It is recommended to appropriately dry and dehydrate the sludge before mixing to control pollutant emissions and ensure the stable operation of the boiler.

2. **Effect of mixing multi-source organic solid waste**:
- After mixing waste cloth strips and paper waste, the temperature levels in the furnace rise, and NOx emissions also increase.
- High calorific value organic solid waste has a significant impact on the temperature in the furnace. For mixed materials with aggregation and encapsulation characteristics, crushing treatment or appropriately increasing the residence time of the material on the grate can be carried out to ensure complete combustion.

3. **Reasonable control of mixing ratio**:
- Control the mixing ratio of different organic solid wastes within a reasonable range to prevent excessive pollutant emissions and unstable operation of the incinerator due to a high mixing ratio.

### Summary

Through experimental research, this paper explores the co-disposal of multi-source organic solid waste in municipal solid waste incinerators, providing guidance for the practical operation and adjustment of the co-disposal of multi-source organic solid waste.