Abstract:The presence of abundant clay components and microporous structure in shale results in its high hydrophilicity, making a water-rich environment inevitable in petroleum exploration projects. Therefore, it is crucial to consider the influence of bedding structure, moisture content, confining pressure, and their combined effects on the geomechanical properties of shale. This article aims to investigate the mechanical properties of deep shale under varying water content conditions, elucidate the failure mode and failure mechanism of shale in actual engineering scenarios, and explores the interplay between stress, structure, moisture content, and other factors on its mechanical properties. The evaluation of wellbore stability and fracture propagation effects is proposed based on laboratory experiments using triaxial stress and strain data, along with the application of energy evolution theory. The experimental procedures encompass an analysis of shale's microscopic components and structure, as well as anisotropic shale triaxial compression tests conducted under different moisture contents and confining pressures. The results demonstrate that shale exhibits dense pores in its microstructure and displays pronounced anisotropic characteristics in its macrostructure. The presence of water within these pores, combined with the in situ stress within the formation, significantly influences the mechanical properties of shale. This anisotropy decreases with increasing moisture content, but the mechanical performance still decreases. Under triaxial compression conditions, the increase in confining pressure to some extent enhances the anisotropy of shale's deformation characteristics, which is related to the failure modes of shale. However, the detrimental effect of moisture content on shale's mechanical properties still persists. In order to quantify the impact of these factors, this study utilizes the elastic modulus as an indicator of the coupling effect. It combines the triaxial strain curve obtained from laboratory tests and proposes an evaluation index for shale mechanical properties based on the energy evolution theory. This index is suitable for assessing wellbore stability (the stability index called SI r ) and crack expansion (the brittleness index called BI r ). The calculation results reveal that, during the wellbore drilling process, excavating parallel to the direction of shale bedding while maintaining low moisture content and high confining pressure yields a higher SI r value, indicating better wellbore stability. On the other hand, during reservoir fracturing, fracturing perpendicular to the shale bedding direction and maintaining low confining pressure and moisture content result in a smaller BI r value. This approach is more beneficial for the expansion of shale fracture network in engineering.

Study on settling characteristics of rock cuttings from terrestrial high clay shale in power-law fluid

A Review of the Settling Law of Drill Cuttings in Drilling Fluids

Flaky cuttings bed distribution model in a shale gas horizontal well based on experiment and numerical simulation

A Novel Prediction Model of the Drag Coefficient of Shale Cuttings in Herschel–Bulkley Fluid

Research on the Mechanism of Wellbore Instability of Oil Shale in Raoyang Sag and Water-Based Anti-sloughing Drilling Fluid

Study of the Wellbore Instability Mechanism of Shale in the Jidong Oilfield under the Action of Fluid

Molecular Simulation of Interactions between High-Molecular-Polymer Flocculation Gel for Oil-Based Drilling Fluid and Clay Minerals

Study on the resistance coefficient of hot dry rock cuttings in Herschel-Bulkley fluid: experiments and modeling

A novel predictive model of drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids

Rock mechanics and wellbore stability of deep shale during drilling and completion processes

Research and application of low oil-water ratio organoclay-free oil-based drilling fluid technology

Study on proppant settlement and transport rule in shale gas fracturing

Experimental study and models of the settling of sand in heavy oil

Experimental study on the sliding friction of cuttings bed and pipe during horizontal-well drilling considering pipe rotation

Mechanical characteristics and reservoir stimulation mechanisms of the Gulong Shale Oil Reservoirs, the northern Songliao Basin

Study on failure characteristics and evaluation index of aquifer shale based on energy evolution

Mathematical model of velocity and distribution law in gas lift reverse circulation well washing flow field for drilling shaft sinking

Oil-Based Vs Water-Based Fluids Behavior With Experimental Cuttings-Bed Erosion in Horizontal Wells

Experimental investigation on flow patterns and pressure gradients of shale oil-water flow in a horizontal pipe

Hydrocarbon Transportation in Heterogeneous Shale Pores by Molecular Dynamic Simulation

A numerical study of fluids desorption and phase behavior in shale oil reservoir using a chemical reaction model