Abstract:A digital twin (DT), with the components of a physics-based model, a data-driven model, and a machine learning (ML) enabled efficient surrogate, behaves as a virtual twin of the real-world physical process. In terms of Laser Powder Bed Fusion (L-PBF) based additive manufacturing (AM), a DT can predict the current and future states of the melt pool and the resulting defects corresponding to the input laser parameters, evolve itself by assimilating in-situ sensor data, and optimize the laser parameters to mitigate defect formation. In this paper, we present a deep neural operator enabled computational framework of the DT for closed-loop feedback control of the L-PBF process. This is accomplished by building a high-fidelity computational model to accurately represent the melt pool states, an efficient surrogate model to approximate the melt pool solution field, followed by an physics-based procedure to extract information from the computed melt pool simulation that can further be correlated to the defect quantities of interest (e.g., surface roughness). In particular, we leverage the data generated from the high-fidelity physics-based model and train a series of Fourier neural operator (FNO) based ML models to effectively learn the relation between the input laser parameters and the corresponding full temperature field of the melt pool. Subsequently, a set of physics-informed variables such as the melt pool dimensions and the peak temperature can be extracted to compute the resulting defects. An optimization algorithm is then exercised to control laser input and minimize defects. On the other hand, the constructed DT can also evolve with the physical twin via offline finetuning and online material calibration. Finally, a probabilistic framework is adopted for uncertainty quantification. The developed DT is envisioned to guide the AM process and facilitate high-quality manufacturing.

Thermal control of laser powder bed fusion using deep reinforcement learning

Deep Reinforcement Learning Based Toolpath Generation for Thermal Uniformity in Laser Powder Bed Fusion Process

Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion

Linear Active Disturbance Rejection Control for a Laser Powder Bed Fusion Additive Manufacturing Process

Improving Build Quality in Laser Powder Bed Fusion Using High Dynamic Range Imaging and Model-Based Reinforcement Learning

Architecture-Driven Physics-Informed Deep Learning for Temperature Prediction in Laser Powder Bed Fusion Additive Manufacturing With Limited Data

Traditional machine learning and deep learning for predicting melt-pool cross-sectional morphology of laser powder bed fusion additive manufacturing with thermographic monitoring

A reinforcement learning approach for process parameter optimization in additive manufacturing

Smart recoating: A digital twin framework for optimisation and control of powder spreading in metal additive manufacturing

Applications of Machine Learning in Process Monitoring and Controls of L-PBF Additive Manufacturing: A Review

Computational Discovery of Energy-Efficient Heat Treatment for Microstructure Design using Deep Reinforcement Learning

Process modeling in laser powder bed fusion towards defect detection and quality control via machine learning: The state-of-the-art and research challenges

Model Predictive Control of Melt Pool Size for the Laser Powder Bed Fusion Process Under Process Uncertainty

A new data-driven framework for prediction of molten pool evolution and lack of fusion defects in multi-track multi-layer laser powder bed fusion processes

Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing

Batch Model Predictive Control for Selective Laser Melting

Deep Neural Operator Enabled Digital Twin Modeling for Additive Manufacturing

A machine learning guided investigation of quality repeatability in metal laser powder bed fusion additive manufacturing

Particle scale modelling of powder recoating and melt pool dynamics in laser powder bed fusion additive manufacturing: A review