Abstract:Additive manufacturing (AM) has significant utility for off-planet fabrication where dedicated infrastructure is severely limited, weight reduction and in situ resource utilization is desirable, and demands for complex systems are high. Direct ink writing (DIW) is a useful AM technique since it enables the deposition of a broad set of materials and the co-printing of multiple materials simultaneously. This allows for the fabrication of complex functional devices and systems in addition to structural objects. To evaluate this technique for space applications, this study characterized DIW in low gravity environments. Parabolic flights were used to simulate Martian, Lunar, and Micro gravity, and the effects that these 3 gravity regimes have on two critical print performance parameters, drooping and slumping, was evaluated using viscous paste inks deposited with an auger-driven extrusion head. In the drooping case, bridging structures were printed across gaps without support material, and the deformation was monitored. In the slumping case, a wall was printed through sequential layer deposition, and the vertical displacement of each layer under reduced gravity was explored. As expected, we found that a reduction in apparent gravity led to a decrease in the droop of a printed line, and as apparent gravitational acceleration is decreased its impact on the magnitude of drooping becomes less significant. For wall structures printed in simulated Lunar or Martian gravity regimes, the total structure height was found to be similar to that of a structure printed under Earth's gravitational conditions. In contrast, for prints performed in microgravity, it was found that slumping was significantly reduced and structure height was larger. These results provide experimental data to enable the design and optimization of appropriate structures and tool paths for printing objects using DIW for off-planet manufacturing.

Xolography for 3D Printing in Microgravity

Xolography for linear volumetric 3D printing

3D Bioprinting in Microgravity: Opportunities, Challenges, and Possible Applications in Space

Xolography for Biomedical Applications: Dual-color Light-sheet Printing of Hydrogels with Local Control over Shape and Stiffness

Ultrasonic Levitation as a Handling Tool for In-Space Manufacturing Processes

Xolography for the Production of Polymeric Multimaterials

Effect of microgravity and reduced atmospheric pressure on manufactured photopolymer specimens

Direct ink writing of viscous inks in variable gravity regimes using parabolic flights

Ceramic paste for space stereolithography 3D printing technology in microgravity environment

Direct foam writing in microgravity

Additive manufacturing of metallic glass from powder in space

Exploration of Electrohydrodynamic Printing Potentially for In-Space Fabrication of Microscale Functional Structures: A Preliminary Study by an Anti-Gravity Configuration

3D Printing of Liquid Crystal Polymers for Space Applications

A gravity-independent powder-based additive manufacturing process tailored for space applications

Focused Electron and X-ray Beam Crosslinking in Liquids for Nanoscale Hydrogels 3D Printing and Encapsulation

Insights into the impact and solidification of metal droplets in ground-based investigation of droplet deposition 3D printing under microgravity

Flight-Scope: microscopy with microfluidics in microgravity

First metal part 3D printed in space

Spatial-Selective Volumetric 4D Printing and Single-Photon Grafting of Biomolecules within Centimeter-Scale Hydrogels via Tomographic Manufacturing

Suppression of Gravity Effects on Metal Droplet Deposition Manufacturing by an Anti-Gravity Electric Field

3D printing in space: from mechanical structures to living tissues