Abstract:In this study, chitosan-gelatin-monetite (CGM)-based electrospun scaffolds have been developed that closely mimicked the microstructure and chemical composition of the extracellular matrix of natural bone. CGM-based nanofibrous composite scaffolds were prepared with the help of the electrospinning technique, post-cross-linked using ethyl(dimethylaminopropyl)carbodiimide and N-hydroxysuccinimide solution to improve their stability in an aqueous environment. The prepared chitosan/gelatin (CG) scaffold showed an average fiber diameter of 308 ± 17 nm, whereas 5 and 7 wt% monetite containing CGM5and CGM7scaffolds, exhibited an average fiber diameter of 287 ± 13 and 265 ± 9 nm, respectively, revealing the fine distribution of monetite particles on the fibrous surface. The distribution of monetite nanoparticles onto the CG nanofibrous surface was confirmed using x-ray diffraction, Fourier transform infrared, and EDAX. Moreover, the addition of 7 wt% monetite into the CG electrospun matrix increased their ultimate tensile strength from 7.62 ± 0.13 MPa in the CG scaffold to 14.34 ± 0.39 MPa in the CGM7scaffold. Simulated body fluid study and staining with alizarin red S (ARS) confirmed the higher mineralization ability of monetite-containing scaffolds compared to that revealed by the CG scaffold. The monetite incorporation into the CG matrix improved its osteogenic properties, including pre-osteoblast MG-63 cell adhesion, proliferation, and differentiation, when seeded with the cells. A higher degree of cellular adhesion, spreading, and migration was observed on the monetite-incorporated CG scaffold than that on the CG scaffold. From 3-(4, 5-dimethylthiazol-2-yl-2, 5-diphenyltetrazolium bromide) MTT assay, alkaline phosphatase activity, ARS staining, and immunocytochemistry study, the cultured cells discovered a more conducive microenvironment to proliferate and subsequently differentiate into osteoblast lineage in contact with CGM7nanofibers rather than that in CGM0and CGM5.In-vitroresults indicated that electrospun CGM-based composite scaffolds could be used as a potential candidate to repair and regenerate new bone tissues.

Effects of the methyl methacrylate addition, polymerization temperature and time on the MBG@PMMA core-shell structure and its application as addition in electrospun composite fiber bioscaffold

Enhanced biocompatibility of PLGA nanofibers with gelatin/nano-hydroxyapatite bone biomimetics incorporation.

Preparation and Biocompatibility of Poly Methyl Methacrylate (PMMA)-Mesoporous Bioactive Glass (MBG) Composite Scaffolds

Enhanced osteogenesis and physicochemical properties of PMMA bone cement with SrBG/HA porous core-shell microspheres

The effect of bioactive glass nanoparticles on polycaprolactone/chitosan scaffold: Melting enthalpy and cell viability

Development of Bioactive Hybrid Poly (Lactic Acid)/Poly (Methyl Methacrylate) (PLA/PMMA) Electrospun Fibers Functionalized with Bioglass Nanoparticles for Bone Tissue Engineering Applications

Development and Characterization of Composites Consisting of Calcium Phosphate Cements and Mesoporous Bioactive Glass for Extrusion-Based Fabrication

Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation

Assessments of EISA-synthesized mesoporous bioactive glass incorporated in chitosan-gelatin matrix as potential nanocomposite scaffolds for bone regeneration

Fabrication of poly(xylitol‐citrate‐sebacate) and strontium‐doped mesoporous bioactive glass scaffold for tissue engineering application

Development of Poly(methyl methacrylate)/nano-hydroxyapatite (PMMA/nHA) Nanofibers for Tissue Engineering Regeneration Using an Electrospinning Technique

Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions

Effect of magnesium and calcium ions on the strength and biofunctionality of GelMA/SAMA composite hydrogels

Optimization of the Mechanical Properties and the Cytocompatibility for the PMMA Nanocomposites Reinforced with the Hydroxyapatite Nanofibers and the Magnesium Phosphate Nanosheets

Biodegradation and Cell Behavior of a Mg-Based Composite with Mesoporous Bioglass

A bi-phase core-shell structure of Mg-based bulk metallic glass for application in orthopedic fixation implants

Biopolymer-coated magnesium-alloy-based multi-functional bio-nanocomposite scaffolds

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Preparation, characterization, and bioactivity of reinforced monetite with chitosan-gelatin electrospun composite scaffold for bone tissue engineering

Preparation, physicochemical properties and biocompatibility of PBLG/PLGA/bioglass composite scaffolds

Electrospinning preparation and surface hydrophilicity investigation of poly(lactic acid), poly(3-hydroxybutyrate-o-4-hydroxybutyrate), and poly(propylene carbonate) nanometer fiber membranes