Abstract:Enhancing Hydrophobicity of PBAT Composites Through Nanocellulose Acetylation. Nanocellulose‐reinforced composites hold great promise for outperforming the original polymer matrix by offering exceptional properties, including outstanding barrier characteristics achieved through the establishment of convoluted pathways for the diffusion of water vapor and gases, as well as superior mechanical and thermal properties. Nevertheless, a significant challenge when employing nanocelluloses as reinforcements in polymers arises from their limited compatibility with the polymer matrix, primarily attributed to the abundance of surface hydroxyl groups.To address this limitation, this study focuses on the acetylation modification of cellulose nanocrystals (CNC) and nanofibers (CNF) to enhance their compatibility with the polymer matrix. Poly(butylene adipate‐co‐terephthalate) (PBAT) nanocomposites were developed by incorporating 1 wt% of both untreated and acetylated cellulose. The process involved the molten state mixing of these components using a twin‐screw mini extruder, conducted at 160°C for 7 min. The efficacy of the acetylation process was verified through Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) analysis confirmed the favorable interaction and dispersion of nanocelluloses within the polymer matrix. Importantly, introducing these fillers did not compromise thermal stability but notably enhanced the hydrophobic characteristics of the samples, as confirmed by contact angle measurements. Dynamic mechanical analyses further demonstrated the compatibility and effective interaction between the polymer and fillers. This research uniquely provides a comparative analysis of the effects of acetylated CNC and CNF within a PBAT matrix, unveiling distinct interactions and performance enhancements. Each type of nanocellulose exhibits its own characteristic ways of bonding and dispersing, leading to varying performance improvements for the material. This comparison elucidates the nuanced roles that these nanocelluloses play in reinforcing composites, offering insights into optimizing their contribution to polymer matrices. By demonstrating the differential impact of CNC and CNF post‐acetylation, our study contributes significantly to the field of polymer science, guiding future applications of nanocellulose‐reinforced materials in advanced engineering and sustainability efforts.

Property enhancement of acrylonitrile butadiene rubber/bagasse ash composites by tannic acid

Synthesis of tannic acid‐terephthalyl chloride modified rubber powder for the fabrication of tannic acid‐terephthalyl chloride‐rubber/ styrene‐butadiene‐styrene modified asphalt

Surface Modification of Rice Husk Ash by Ethanol-assisted Milling to Reinforce the Properties of Natural Rubber/Butadiene Rubber Composites

Effect of tannic acid modified bamboo fiber on the performance of soybean bio‐asphalt/styrene‐butadiene‐styrene modified asphalt

Toughening of bisphenol A and carboxyl-terminated butadiene-acrylonitrile to epoxy resin

Physical Adsorption of Polyacrylic Acid on Boron Nitride Nanotube Surface and Enhanced Thermal Conductivity of Poly(vinyl alcohol) Composites

Toughening of Poly(butylene Terephthalate) with Epoxy-Functionalized Acrylonitrile–butadiene–styrene

Preparation and properties of SBR/PPTA nanocomposite via in‐situ interfacial polycondensation

Enhanced dielectric constant of acrylonitrile–butadiene rubber/barium titanate composites with mechanical reinforcement by nanosilica

Bioinspired Tannic Acid-Modified Coffee Grounds as Sustainable Fillers: Effect on the Properties of Polybutylene Adipate Terephthalate Composites

Barium Titanate-reinforced Acrylonitrile-Butadiene Rubber: Synergy Effect of Carbon-based Secondary Filler

Preparation and characterization of poly(butylene adipate‐co‐terephthalate) composites reinforced with acetylated cellulose nanocrystals and nanofibers for enhanced properties

Effect of in situ silanization of multiwalled carbon nanotubes on the properties of NBR/MWCNT-OH composites

Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio‐inspired surface modification and aramid nanofiber coating

Tannic acid as cross-linker and flame retardant for preparation of flame-retardant polyurethane elastomers

Effect of Styrene Acrylic Emulsion (SAE) and Nitobond Acrylic (AR) on mechanical properties of bagasse-cement brick

Application of Tamarind Shell as a Green Additive in Natural Rubber

Influence of Supercritical Carbon Dioxide-Assisted Polyamide Acid Modification of Aramid Fibers on the Properties of Aramid Fiber-Reinforced Styrene Butadiene Rubber

Enhancing performance: insights into the augmentation potential of acrylonitrile butadiene styrene/boron nitride composites

Flame-retardant effect of tannic acid-based intumescent fire-retardant applied on flammable natural rubber

Effects of Amino‐functionalized Carbon Nanotubes on the Properties of Amine‐terminated Butadiene–acrylonitrile Rubber‐toughened Epoxy Resins