Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

A Seahorse-Inspired Continuum Robot With High Load Capacity

Versatile Like a Seahorse Tail: A Bio‐Inspired Programmable Continuum Robot For Conformal Grasping

Design and Analysis of Bionic Continuum Robot With Helical Winding Grasping Function

A Preprogrammable Continuum Robot Inspired by Elephant Trunk for Dexterous Manipulation

An Optimized Cable Layout Method for Cable-Driven Continuum Robots

A bioinspired fishbone continuum robot with rigid-flexible-soft coupling structure

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Design of a Cable Driven Floating Robotic Arm with Continuum Joints.

A Continuum Robot with Twin-Pivot Structure: The Kinematics and Shape Estimation

An Origami Continuum Robot Capable of Precise Motion Through Torsionally Stiff Body and Smooth Inverse Kinematics

Design and Kinematics of a Novel Continuum Robot Connected by Unique Offset Cross Revolute Joints

A Snake-Inspired Layer-Driven Continuum Robot

Kinematic Analysis and Simulation for Cable-driven Continuum Robot

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

A Variable-Cross-Sectional Continuum Manipulator Capable of Grasping by Whole-Arm Wrapping

Design and Analysis of a Novel Variable Stiffness Continuum Robot With Built-in Winding-Styled Ropes

A Novel Contact-aided Continuum Robotic System: Design, Modeling, and Validation

A Novel Space Robot with Triple Cable-Driven Continuum Arms for Space Grasping

Unlocking the Potential of Cable-Driven Continuum Robots: A Comprehensive Review and Future Directions

Analysis and Validation of a Flexible Limb/Cable Hybrid-Driven Parallel Continuum Manipulator

Design of a Deployable Continuum Robot Using Elastic Kirigami-Origami