Precise assembly of a zeolite imidazolate framework on polypropylene support for the fabrication of thin film nanocomposite reverse osmosis membrane

Pengfei Li,Mengmeng Zhang,Zhe Zhai,Ming Wang,Peng Li,Yingfei Hou,Q. Jason Niu

DOI: https://doi.org/10.1016/j.memsci.2020.118412

IF: 9.5

2020-10-01

Journal of Membrane Science

Abstract:<p>Polypropylene (PP) has been widely used in the fields of lithium battery separators, proton exchange membranes, membrane bioreactors and polyamide (PA) thin film composite (TFC) reverse osmosis (RO) membranes owing to its excellent mechanical strength, chemical durability and low cost. Nevertheless, its inherent strong hydrophobicity and low surface porosity severely limit its in-depth development in the field of polyamide TFC membranes. Herein, we propose a general strategy for the precise assembly of ZIF-8 nanoparticles on PP support for the fabrication of RO membrane. By this method, position induced nanoporous surface (PINS) was introduced via in-situ synthesis of ZIF-8 assisted by diazonium-induced anchoring process (DIAP) on PP support, and it would achieve precise repair of non-porous regions of PP support, thereby increasing its surface porosity and hydrophilicity of PP support. Subsequently, a high-performance ZIF-8 hybrid reverse osmosis (HPP-ZIF-8-RO) membrane was fabricated by conventional interfacial polymerization (IP) on modified commercialized PP support for the first time. The optimal rejection of HPP-ZIF-8-RO for NaCl is ∼99%, and the water flux is up to 50 kg m⁻² h⁻¹ under the operating pressure of 1.55 MPa. In addition, the HPP-ZIF-8-RO membrane has a superior chemical stability after the solvent resistance test. To prove the university of DIAP and PINS, we have successfully fabricated other types of HPP-MOF-RO (HPP-ZIF-67-RO, HPP-HKUST-1-RO) which also show enhanced desalination performance. Hence, DIAP and PINS could provide a convenient and versatile method for precise repairing the defect area of the hydrophobic porous substrates.</p>

engineering, chemical,polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to overcome the challenges faced by polypropylene (PP) support materials in the preparation of reverse osmosis membranes due to their strong hydrophobicity and low surface porosity. Specifically, the author proposes a general strategy for precisely assembling zeolitic imidazolate framework (ZIF - 8) nanoparticles on polypropylene support materials to prepare high - performance thin - film nanocomposite reverse osmosis membranes. Through this method, the position - induced nanoporous surface (PINS) is introduced, and ZIF - 8 is synthesized in - situ on the polypropylene support material through the diazo - induced anchoring process (DIAP), achieving precise repair of the non - porous areas of the polypropylene support material, thereby increasing its surface porosity and hydrophilicity. This not only solves the defects of traditional polypropylene support materials but also improves the performance of reverse osmosis membranes, especially showing more prominent performance in seawater desalination applications.