Abstract:High-entropy RETa 3 O 9 ceramics have garnered significant interest in materials science due to their impressive high melting points and lower thermal conductivity. This study focuses on three types of these ceramics: (La 0.2 Ce 0.2 Nd 0.2 Sm 0.2 Dy 0.2 )Ta 3 O 9 , (La 0.2 Ce 0.2 Nd 0.2 Sm 0.2 Tm 0.2 )Ta 3 O 9 , and SmTa 3 O 9 .The results indicate that the coefficient of thermal expansion (TEC) for RETa3O9 ceramics remains in the range of approximately 5.94 × 10 −6 K -1 to 6.05 × 10 −6 K -1 when subjected to temperatures from room temperature up to 1400 °C. This TEC is notably similar to that of silicon carbide ceramic matrix composites (SiC-CMC), which is essential for compatibility in applications where these materials are used together.Moreover, the study highlights an important finding: after 20 h of exposure to a CMAS (calcium-magnesium-alumino-silicate) environment at 1300 °C, the high-entropy tantalates exhibit significantly reduced susceptibility to corrosion compared to traditional single-component tantalate ceramics. While single-component materials, including SmTa3O9, showed greater degradation, the high-entropy RETa3O9 ceramics maintained their original morphology, free from porosity and cracking.This impressive resistance to CMAS corrosion indicates that the high-entropy design is beneficial in enhancing the durability of tantalates in extreme environments. Consequently, these findings suggest that high-entropy RETa3O9 ceramics hold promise for use as thermal/environmental barrier coating (T/EBC) materials in applications involving SiC-CMCs, potentially leading to improved performance and longevity in high-temperature applications.

High‐entropy engineering promotes the thermal properties and corrosion resistance of rare‐earth hafnates

CMAS Corrosion Behavior of Mid-Entropy Rare-Earth Hafnate (Y0.3Gd0.3Yb0.4)4Hf3O12 as Thermal Barrier Coating Candidate

Thermophysical Properties of a Novel High Entropy Hafnate Ceramic

High-entropy engineering improved the corrosion resistance of rare earth tantalates

High-entropy (ho1/4er1/4dy1/4gd1/4)2 Si2O7: A Promising Thermal Environmental Barrier Coating Material

High‐entropy (Ho1/4Er1/4Dy1/4Gd1/4)2Si2O7: A promising thermal environmental barrier coating material

Rare-earth cerates with a high coefficient of thermal expansion and excellent CMAS corrosion resistance obtained through high-entropy designing

High-throughput Composition Screening of High-Entropy Rare-Earth Monosilicates for Superior CMAS Corrosion Resistance Up to 1873 K

Enhanced High-Temperature Performance of Selected High-entropy Rare Earth Disilicates

Ti4+-incorporated fluorite-structured high-entropy oxide (Ce,Hf,Y,Pr,Gd)O2−δ: Optimizing preparation and CMAS corrosion behavior

Engineering Stoichiometry of High Entropy Fluorite Oxide to Obtain Optimized Thermophysical Property and Improved Corrosion Resistance

Preparation and entropy regulation study of low thermal conductivity and high strength (ZrHfCeYLaX)O oxides

Single-phase Rare-Earth High-Entropy Zirconates with Superior Thermal and Mechanical Properties

High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties

Composition-driven Superior CMAS Corrosion Resistance of High-Entropy Rare-Earth Disilicates

Thermophysical and electrical properties of rare‐earth‐cerate high‐entropy ceramics

A novel dual-phase high-entropy (La0.2Nd0.2Gd0.2Er0.2Yb0.2)2Zr2O7 ceramic for thermal barrier coatings applications: Preparation, microstructure, and thermo–physical properties

A new class of high-entropy fluorite oxides with tunable expansion coefficients, low thermal conductivity and exceptional sintering resistance

Excellent CMAS corrosion resistance of high entropy garnet/alumina directionally solidified eutectic at 1500°C

Tuning stoichiometry of high‐entropy oxides for tailorable thermal expansion coefficients and low thermal conductivity

Designing high-entropy rare-earth zirconates with tunable thermophysical properties for thermal barrier coatings