Abstract:In this paper, changes in the porous structure of carbon material are investigated during chemical activation of apricot pit at different temperatures. The main purpose of the research has been to study the features of the internal micro- and mesostructure of the carbon surface, as well as to find patterns in the size distribution of pores dependent on the carbonization temperature of plant raw materials and subsequent chemical activation. The object of the study is porous carbon material, obtained from dried apricot fruit pits, pre-crushing, and cleaned from the core. This raw material has been carbonized at 300–900 °C with an interval of 100 °C and subjected to chemical activation by potassium hydroxide in the weight ratio XК, where ХК = m(KOH)/m(C). Thereby, a series of samples C3÷C9 has been obtained. The porous structure characteristics (specific surface area and total pore volume) of porous carbon material have been determined based on the analysis of nitrogen adsorption / desorption isotherms. It has been found that these materials have a frame structure with a large number of micropores. The analysis of literature data has revealed that the experimental curves belong to the isotherms that are characteristic of multilayer adsorption in micro- and mesopores of materials of organic origin. The hysteresis loop observed on these isotherms is related to the sorption processes in narrow pores. It has been found that carbonization of raw materials and chemical activation contribute to the cleaning of the frame structure, and there are acceptable modes of heat treatment of raw materials of plant origin, which determine the optimal pore size distribution and have a specific surface area S = (1042–1313) m2/g. With the help of scanning electron microscopy, the peculiarities of the formation of impurities on the surface of the original samples have been studied and their nature has been elucidated. It has been found that the largest total pore area has a sample carbonized at 600 oC, and the largest pore volume Vtotal = 0.68 cm3/g for sample C3 is associated with a significant number of mesopores in the porous structure. As the carbonation temperature increases to 800-900 °C, narrow micropores degenerate and the carbon matrix transforms, resulting in a decrease in both the total pore area and the total porous volume.

An easy way to predict and direct the porous structure of activated carbons derived from petroleum asphalt

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Effect of thermal pretreatment on porous structure of asphalt-based carbon

Parameters influence establishment of the petroleum coke genesis on the structure and properties of a highly porous carbon material obtained by activation of KOH

Textural Properties Prediction of KOH-activated Carbon Prepared from Coal Based on Pyrolysis Kinetics

Influence of carbonization conditions on porous structure of carbon materials

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Effect of synthesis conditions on the porous texture of activated carbons obtained from Tara Rubber by FeCl3 activation

Computer Analysis of the Effect of Activation Temperature on the Microporous Structure Development of Activated Carbon Derived from Common Polypody

Effect of asphalt component distribution characteristics in layered porous carbon on performance of supercapacitors

Production and characterization of activated carbons from asphaltene by carbon dioxide and steam for ibuprofen adsorption

Effect of the pretreatment on the porosity of the hybrid activated carbons prepared from wood-based solid and liquid precursors

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Effect of high-temperature pyrolysis on the structure and properties of coal and petroleum coke

Preparation of Porous Carbons from Oil Residues

Characterization of active carbons: the influence of the method in the determination of the pore size distribution

Mathematical analysis of the effect of process conditions on the porous structure development of activated carbons derived from Pine cones

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation

OBTAINING POROUS CARBON MATERIAL AND INVESTIGATION OF ITS PHYSICAL AND CHEMICAL PROPERTIES

Effect of pyrolysis conditions on the improvement of the physicochemical structure of activated carbon obtained from Jixi bituminous coal