Abstract:Direct dyes which remain in solution in an acidified dyebath, as most do, can be dyed on nylon yarn at rates comparable with those of the same dyes when dyed on viscose rayon yarn from a neutral bath. In the absence of acid, nylon yarn absorbs direct dyes much more slowly than does viscose rayon. The rate and equilibrium absorption of direct dyes by nylon yarn is dependent upon the pH of the dyebath. Increase of dyeing temperature increases the rate of absorption of both direct dyes and acid dyes and decreases the equilibrium absorption. With direct dyes, neutral salts raise the rate and degree of dyebath exhaustion from a neutral bath and decrease both in an acid bath; the latter behaviour is also shown by acid dyes on wool or nylon. Nylon, like wool, has an acid‐binding capacity which increases with the mol. wt. of the acid for a series of organic sulphonic acids, and is lower than that of wool. Nylon yarn dyed with direct dyes exhibits dichroism when examined in polarised light. Some acid dyes produce dichroism on nylon and some do not. All the above facts are accommodated if a dual behaviour is attributed to nylon, viz. that its union with dye may result from (a) the formation of a salt link as with wool and/or (b) the exertion of residual valency forces as with cellulose. The fastness to washing and light of nylon yarn dyed with acid dyes, direct dyes, cellulose acetate rayon dyes and chrome dyes has been compared directly with that of viscose rayon, cellulose acetate rayon and wool. Recommendations as to the potential usefulness of different classes of dyes are made. Direct dyes do not cause appreciable degradation of nylon when the dyeings are exposed. Vat dyes cause extensive degradation, which takes place more rapidly than is the case with cellulosic fibres and is accompanied by similarly rapid fading of dye. Whereas fading of dyes occurs in the presence or absence of oxygen, an atmosphere containing oxygen is essential for photodegradation of the fibre.

Factors Influencing the Daylight Photodegradation of Nylon 66, Nylon 6, and Polyester in Commercial Fabrics

The fracture of nylon 66 yarns which have been exposed to light

Photodegradation Processes and Weathering Products of Microfibers in Aquatic Environments

Some Experiments on the Dyeing of Nylon Yarn

Study of the Influence of the Surface Roughness of Knitted Fabrics from Natural Fibres on the Light Fastness of Their Colours

Factors influencing the stability of man-made fibers: A retrospective view for historical textiles

Study on Fading Behavior of Reactive Black 5 DyedFabrics in Washing Process

Analysis on the Major Environmental Factors Affecting the Weather Resistance of Polyester Coating

Environmentally Friendly Coloration of Polyamide Fabrics with the Use of Natural Dyes: A Study Including Results of Industrial Scale Applications

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Microfibers Generated from the Laundering of Cotton, Rayon and Polyester Based Fabrics and Their Aquatic Biodegradation.

Study on photofading of two natural dyes sodium copper chlorophyllin and gardenia yellow on cotton

Degradation study of polyester fiber in swimming pool water

Enhancing Insight into Photochemical Weathering of Flax and Miscanthus: Exploring Diverse Chemical Compositions and Composite Materials

Prospects and Problems in the Dyeing and Finishing of Differential‐dyeing Nylon 6.6 Yarns

Influence of Aging on the Physical Properties of Knitted Polymeric Materials

Effect of Thermal Aging on the Mechanical Properties of High Tenacity Polyester Yarn

Preparation of Photochromic and Photoluminescent Nonwoven Fibrous Mat from Recycled Polyester Waste

Influence of Yarn and Fabric Properties on Mechanical Behavior of Polymer Materials and Its Retention over Time

Discussion on Factors Affecting Dyeing of Bio-based Polyamide 5,6 Fibers Compared with Polyamide 6,6 Fibers

Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis