Abstract:Siloxanes are widely used in different applications: health care, dry cleaning, household products, paints and coatings, paper, personal care, for example. This explains their prevalence in the environment. Because of their volatile nature, most of the time they are dispersed in the atmosphere, but they can also be present in the slurry from landfills. During anaerobic digestion, when the temperature goes up to 60 degrees C, siloxanes are volatilized, forming part of the biogas. Operational problems using biogas to produce energy, heat and hydrogen have been identified. At high temperatures the siloxanes are transformed into silicate dioxide (commonly called sand transmission). These white deposits may adhere to metal or catalytic substrate surfaces, seriously reducing equipment efficiency, and this can be a reason for changing equipment warranties. Consequently, elimination of siloxanes has become very important. Unfortunately, relatively little information can be found on this subject. Nevertheless some authors have described different analytical methods for siloxane quantification, and recent studies have looked at the presence of siloxanes in landfills and the restriction on the energy recovery equipment using the biogas produced. The growing consumption of siloxanes and silicones in industrial processes consequently increase their prevalence in the environment, hampering the use of biogas as a source of 'green energy'. Therefore, the principal focus of this study is the treatment of siloxanes. Their elimination was carried out using an adsorption process with four different porous materials: activated carbon cloths (ACC), granular activated carbon (GAC), zeolite and silica gel. Two representative siloxane compounds were used in this study, hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4). Adsorption kinetics and isotherms in batch reactors were performed. It was observed that the mass transfer into the porous material was more rapid for the activated carbon than for the zeolite and silica gel, congruent with the porous structure of the material. Moreover, it was found that D4 is more adsorbable than L2, due to possible interactions between the solid surface and the physical structure of the cyclic compound (D4). The influence of humidity and temperature were also studied. The increase in the temperature reduced the adsorption capacities. The influence of humidity on the adsorption was investigated under dry air and humid air at 70%. No significant difference in the adsorption capacities was found for the activated carbon and for the zeolite, but for the silica gel the mass transfer decreased considerably. For the adsorption isotherms, the maximal capacity of elimination was obtained with the activated carbon materials and was directly related to the porous structure. Thus activated carbon cloth was chosen to design the adsorption-desorption processes in a dynamic system. Thermal heating was used to achieve the regeneration process. Initial cycles have been accomplished and show the stability of the process.

Synthesis and Characterization of Silica-Based Adsorbents Employing Maize Stalks as Porogenic Agents and Their Application in Phenol Removal

Fabrication of silica/calcium alginate nanocomposite based on rice husk ash for efficient adsorption of phenol from water

Cellulase modified waste biomass to remove sulfamethazine from aqueous solutions

Application of a novel hybrid MIL-53(Al)@rice husk for the adsorption of glyphosate in water: Characteristics and mechanism of the process

Comparative study of phenol compounds adsorption on mesoporous sieves with different degrees of modification

Preparation and Characterization of a Novel Silica Aerogel As Adsorbent for Toxic Organic Compounds

Siloxane treatment by adsorption into porous materials

Synthesis of a novel functionalized biosorbent from mango stone and its application in the pharmaceutical's removal from water and a synthetic mixture

Facile Extraction and Characterization of Silica Nanoparticles from Corn Stalk by Sol-Gel Hydrothermal Methods

Modified Silica Nanoparticles from Rice Husk Supported on Polylactic Acid as Adsorptive Membranes for Dye Removal

Monolith Passive Adsorbers Prepared with Hydrophobic Porous Silica Rods Coated with Hydrogel

Intercalation of organosilane in clay mineral for the removal of Procion red MX-5B: Investigational and theoretical studies

Adsorption Properties of Mesoporous Silicas for Organic Pollutants in Water

Tailoring of Mesoporous Silica-Based Materials for Enhanced Water Pollutants Removal

Magnetic CuFe2O4 Nanoparticles Immobilized on Modified Rice Husk-Derived Zeolite for Chlorogenic Acid Adsorption

Mussel Inspired Preparation of Functional Silica Nanocomposites for Environmental Adsorption Applications

CO2/H2O adsorption and co-adsorption on functionalized and modified mesoporous silicas

Zearalenone removal using inactivated yeast embedded in porous modified yam starch aerogels and its application in corn silk tea

Synthesis and CO2 adsorption property of amino-functionalized silica nanospheres with centrosymmetric radial mesopores

Adsorptive-Photocatalytic Composites of α-Ferrous Oxalate Supported on Activated Carbon for the Removal of Phenol under Visible Irradiation