Molten iodide salt electrolyte for low-temperature low-cost sodium-based liquid metal battery

Qing Gong,Wenjin Ding,Alexander Bonk,Haomiao Li,Kangli Wang,Adrian Jianu,Alfons Weisenburger,Andreas Bund,Thomas Bauer
DOI: https://doi.org/10.1016/j.jpowsour.2020.228674
IF: 9.2
2020-11-01
Journal of Power Sources
Abstract:Using low-melting-point electrolytes could overcome various key challenges of low-cost sodium-based liquid metal batteries (Na-LMBs), e.g. high rates of self-discharge and degradation of structural materials, by lowering their operating temperatures. Molten halide salts are considered promising electrolyte candidates for Na-LMBs due to their high stability and electrical conductivity. In this work, thermodynamic simulation via FactSageTM and thermal analysis via e.g. Differential Scanning Calorimeter (DSC) were carried out to explore the NaI-LiI-KI system, since it could be a promising electrolyte for Na-LMBs due to its low melting point and Na solubility. The results show that the eutectic NaI-LiI-KI performs as a pseudo-binary salt with a melting point of ~290 °C. In this pseudo-binary salt, the solubility of NaI in the eutectic LiI-KI is ~7 mol%. Using the eutectic NaI-LiI-KI electrolyte, Na-LMBs could be operated at < 350 °C. Moreover, the Na solubility and Na+ conductivity of the eutectic NaI-LiI-KI electrolyte, which are vital to the battery performance, were estimated by calculation based on the literature data. Additionally, its applicability and economy were also discussed based on cost pre-analysis of salt materials, salt treatment and structural materials regarding salt corrosivity.
energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
What problem does this paper attempt to address?
This paper mainly discusses the application of low-melting iodide salt electrolytes in low-temperature and low-cost sodium-based liquid metal batteries (Na-LMBs) to address key issues such as high self-discharge rate and material degradation in these batteries. The researchers explored the NaI-LiI-KI system using thermodynamic simulation software FactSageTM and thermal analysis methods such as differential scanning calorimetry (DSC), because this system has a low melting point and moderate solubility of sodium. The experimental results showed that NaI-LiI-KI behaves like a binary salt with a melting point of about 290℃, and the solubility of NaI in LiI-KI is approximately 7 mol%. This allows Na-LMBs to operate at temperatures below 350℃. In addition, the paper estimated the solubility of sodium and the ion conductivity of Na+ and discussed the applicability and economic feasibility of this electrolyte based on cost pre-analysis. The aim of the study is to find a low-melting, low-sodium solubility, and high ion conductivity salt electrolyte to improve the performance of Na-LMBs.