Comprehensive analysis of the effect of weight percentage of V and Mn doping in NiCo MOFs for hybrid supercapacitors

V. Tejashree,S. Srividhya,M.G. Radhika,Krishna Venkatesh,Kathyayini Nagaraju
DOI: https://doi.org/10.1016/j.est.2024.114780
IF: 9.4
2024-11-28
Journal of Energy Storage
Abstract:The present work provides a critical exploration of the use of NiCo Metal organic frameworks (NC) as pseudocapacitor materials with different weight percentages of V & Mn (1, 5, 10, and 20 %, abbreviated as NCV 1 – 20 & NCM 1 – 20 ) in NC for hybrid supercapacitors. Physico-chemical properties of all MOFs were characterized by means of analytical techniques such as P-XRD, FT-IR, BET, TGA, ICP-OES, SEM-EDS, HR-TEM & SAED. The MOFs NCV 1 and NCM 1 showed a good specific capacitance (Cs) value of 1074 Fg −1 and 1389 Fg −1 at 2 mVs −1 with 503 Fg −1 and 783 Fg −1 at 1 Ag −1 respectively in 1 M KOH. The Cs values of NCV 1 and NCM 1 were lesser compared to pure NC (1862 Fg −1 at 2 mVs −1 and 811 Fg −1 at 2.5 Ag −1 ). At each of their respective OCP windows, the estimated Cs values of NC, NCV 1 , and NCM 1 were found to be 512, 371, and 383 Fg −1 . All the MOFs were stable for 20,000 cycles at a current density of 20 Ag −1 with good Cs retention values for NCV 1 and NCM 1 . This statistical analysis of the values acquired from the electrochemical studies of all the MOFs, indicated the negative effect (with respect to electrochemical performance) of V and Mn doping in NCs and hence hinged on other physico-chemical properties.Asymmetric coin cells NCV 1 //CA and NCM 1 //CA (charcoal activated carbon) were fabricated in 1 M KOH solution. Out of which, NCM 1 //CA exhibited a Cs of 140.3 Fg −1 at 2 mVs −1 (0-2 V) and 65.4 Fg −1 at 1 Ag −1 in an operating potential window of 1.7 V. The cell also indicated maximum Energy density (ED) and Power density (PD) of 26.2 Whkg −1 and 17 k Wkg −1 respectively. Further, cycles stability test indicated 67.6 % of Cs retention with coulombic efficiency of 100 % at the end of 75,000 cycles. To check the practical application, two such designed cells were charged to 3 V at 2.5 Ag −1 connected in series and utilized to power six LEDs for three minutes.
energy & fuels
What problem does this paper attempt to address?