Improvement in the Figure of Merit of ITO-Metal-ITO Sandwiched Films on Poly Substrate by High-Power Impulse Magnetron Sputtering

Hui Li,Ying-Jie Gao,Shuo-Huang Yuan,Dong-Sing Wuu,Wan-Yu Wu,Sam Zhang
DOI: https://doi.org/10.3390/coatings11020144
IF: 3.236
2021-01-28
Coatings
Abstract:High-power impulse magnetron sputtering (HiPIMS) was used to deposit ITO/Ag/ITO (IAgI) and ITO/Cu/ITO (ICuI) sandwiched films on polyethylene naphthalate substrate at room temperature as flexible transparent conductive materials. The hybrid layers were constructed with 40 nm ITO bottom and top layers, and a 5–20 nm Ag or Cu interlayer. The microstructure and optoelectrical properties were estimated for these films with various thicknesses of the metal interlayer. Thanks to the high-power density and highly ionized plasma in the HiPIMS process, the IAgI and ICuI sandwich structures exhibited good crystallinity and smooth surfaces with high optical transmittance and low sheet resistance. The optimal figure of merit was obtained as 101.16 × 10−3·Ω−1 for the IAgI film and 4.83 × 10−3·Ω−1 for the ICuI film with the metal interlayer thickness of 10 nm, both of which are higher than that from a similar structure reported via sputtering at room temperature. These results indicate that HiPIMS is a promising technique to deposit transparent conductive films onto soft substrates for applications in flexible optoelectronic devices.
materials science, multidisciplinary,physics, applied, coatings & films
What problem does this paper attempt to address?