Photocatalytic Rejuvenation Enabled Self-Sanitizing, Reusable, and Biodegradable Masks against COVID-19
Qiang Li,Yongchao Yin,Daxian Cao,Ying Wang,Pengcheng Luan,Xiao Sun,Wentao Liang,Hongli Zhu
DOI: https://doi.org/10.1021/acsnano.1c03249
IF: 17.1
2021-06-25
ACS Nano
Abstract:Personal protective equipment (PPE) has been highly recommended by the U.S. Centers for Disease Control and Prevention for self-protection during the disastrous SARS-CoV-2 (COVID-19) pandemic. Nevertheless, massive utilization of PPE encounters significant challenges in recycling and sterilizing the used masks. To tackle the associated plastic pollution of used masks, in this work, we designed a reusable, biodegradable, and antibacterial mask. The mask was fabricated by the electrospinning of polyvinyl alcohol (PVA), poly(ethylene oxide) (PEO), and cellulose nanofiber (CNF), followed by esterification and the deposition of a nitrogen-doped TiO<sub>2</sub> (N-TiO<sub>2</sub>) and TiO<sub>2</sub> mixture. The fabricated mask containing photocatalytic N-TiO<sub>2</sub>/TiO<sub>2</sub> reached 100% bacteria disinfection under either 0.1 sun simulation (200–2500 nm, 106 W m<sup>–2</sup>) or natural sunlight for only 10 min. Thus, the used mask can be rejuvenated through light irradiation and reused, which represents one of the handiest technologies for handling used masks. Furthermore, intermolecular interactions between PVA, PEO, and CNF enhanced the electrospinnability and mechanical performance of the resultant mask, which possesses a 10-fold elastic modulus and 2-fold tensile strength higher than a commercial single-use mask. The porous structures of electrospun nanofibers along with strong electrostatic attraction enabled breathability (83.4 L min<sup>–1</sup> of air flow rate) and superior particle filterability (98.7%). The prepared mask also had excellent cycling performance, wearability, and stable filtration efficiency even after 120 min wearing. Therefore, this mask could be a great alternative to current masks to address the urgent need for a sustainable, reusable, environmentally friendly, and efficient PPE under the ongoing COVID-19 contagion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c03249?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c03249</a>.Figures showing EDX of N-TiO<sub>2</sub>, viscosity of electrospinning dopes, SEM images of both surfaces and cross sections of our mask and a commercial mask, contact angle of mask, schematic of antibacterial and photocatalytic rejuvenation test, photo images of as-electrospun mask, thermal images of temperature distributions under mimicking sunlight and real sunlight, fluorescence microscopy and photo images of bacteria mounted on mask, photo images of a commercial mask, stress–strain curves and the calculated mechanical performance, TiO<sub>2</sub> leaking test setup and results, and biodegradability/dissolution test setup and results of our mask in both water and soil; tables containing composition of mimicking sunlight, details of the calculated mechanical performances, details of cost estimation, and composition of our mask (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c03249/suppl_file/nn1c03249_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology