Abstract:Continuum manipulators have infinite degrees of freedom and high flexibility, making it challenging for accurate modeling and control. Some common modeling methods include mechanical modeling strategy, neural network strategy, constant curvature assumption, etc. However, the inverse kinematics of the mechanical modeling strategy is difficult to obtain while a strategy using neural networks may not converge in some applications. For algorithm implementation, the constant curvature assumption is used as the basis to design the controller. When the driving wire is tight, the linear controller under constant curvature assumption works well in manipulator position control. However, this assumption of linearity between the deformation angle and the driving input value breaks upon repeated use of the driving wires which get inevitably lengthened. This degrades the accuracy of the controller. In this work, the Koopman theory is used to identify the nonlinear model of the continuum manipulator. Under the linearized model, the control input is obtained through model predictive control (MPC). As the lifted function can affect the effectiveness of the Koopman operator-based MPC (K-MPC), a novel design method of the lifted function through the Legendre polynomial is proposed. To attain higher control efficiency and computational accuracy, we use a selective control scheme according to the state of the driving wires. When the driving wire is tight, the linear controller is employed; otherwise, the K-MPC is adopted. Finally, a set of static and dynamic experiments have been conducted using an experimental prototype. The results demonstrate high effectiveness and good performance of the selective control scheme.

Robust control of planar dual-arm cooperative manipulators

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Cooperative compliance control of the dual-arm manipulators with elastic joints

Dual-arm cooperative manipulation under joint limit constraints

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Dual-Arm Coordinated Control Strategy Based on Modified Sliding Mode Impedance Controller

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Neuro-Adaptive Cooperative Control for Dual-Arm Robots With Position and Velocity Constraints: An Optimal Torque Allocation Approach

Symmetrical adaptive variable admittance control for position/force tracking of dual-arm cooperative manipulators with unknown trajectory deviations

Independent force and position control for cooperating manipulators handling an unknown object and interacting with an unknown environment

Adaptive coordinated control of multiple manipulators handling a constrained object

Coordinated Resolved Motion Control of Dual-Arm Manipulators with Closed Chain

Adaptive hybrid impedance control for dual-arm cooperative manipulation with object uncertainties

Coordinated compliance control of dual-arm robot for payload manipulation: Master-slave and shared force control

Experimental Investigation into the Coordinated Manipulation of a Dual-arm Modular Robot

Robust coordinated control of a dual-arm space robot

Cooperative Fault-Tolerant Control for a Mobile Dual Flexible Manipulator With Output Constraints

Asymmetric Bimanual Control of Dual-Arm Exoskeletons for Human-Cooperative Manipulations

Coordinated motion control of a dual-arm space robot for assembling modular parts

Robust Control of Uncertain Robotic Systems: an Adaptive Friction Compensation Approach

Robust Position Control of a Continuum Manipulator Based on Selective Approach and Koopman Operator