Abstract:Recent urbanization has posed challenges for the global navigation satellite system (GNSS) to provide accurate navigation solutions. This is especially true in GNSS-denied environments, where the clear line of sight (LOS) path between the satellites and receiver is lacking. For such environments, fusion-based techniques relying on external sensors and/or other signals are widely used. However, such external sensors and signals may not be feasible and/or cost-effective every time. To overcome these limitations, this work proposes a system that makes explicit use of past available measurements, under certain assumptions, to generate new synthetic measurements. For this purpose, two functions are proposed in this work: a geometrically decaying series and a linear combination of past measurements. To enhance the overall performance of the system, an inertial measurement unit (IMU) is used as an additional measurement source in the extended Kalman filter (EKF). In addition, an approach to adapt the noise co-variances that support the generation of synthetic measurements is proposed. Furthermore, we derive the optimal gain under specific assumptions for a concrete theoretical understanding of the proposed algorithm. The proposed algorithm is tested and validated through two real-world datasets collected in Hong Kong, one corresponding to a moving vehicle inside a significantly long sea tunnel and another set in a harsh urban area, involving complex trajectories. A detailed analysis of the results has been performed with respect to all the aforementioned contributions. Additionally, the proposed algorithm has been compared with other existing algorithms. Experimental results show that a mean error of about 4 m is attained inside the tunnel, while it is around 4.6 m for the second scenario set in a harsh urban environment.

Multipath Mitigation via Synthetic Aperture Beamforming for Indoor and Deep Urban Navigation

A Pedestrian Indoor Navigation System Using Deep-Learning-Aided Cellular Signals and ZUPT-Aided Foot-Mounted IMUs

Last-Mile Navigation Using Smartphones

Demonstrating the Merits of Integrating Multipath Signals into 5G LoS-Based Positioning Systems for Navigation in Challenging Environments

Signal Tracking Algorithm with Adaptive Multipath Mitigation and Experimental Results for LTE Positioning Receivers in Urban Environments

Enabling High-Precision 5G mmWave-Based Positioning for Autonomous Vehicles in Dense Urban Environments

Research on the NLoS Mitigation Algorithm for Integrated Navigation of BeiDou and TD-LTE

Accurate and Direct GNSS/PDR Integration Using Extended Kalman Filter for Pedestrian Smartphone Navigation

A Learning-Based NLOS Mitigation Method for Single-Anchor SLAM

A Robust Single-Anchor Localization Method with Multipath Assistance in NLOS Environments.

A Synthetic Aperture Scheme for Integrated Localization and Navigation in Passive IoT

Pair-Navi: Peer-to-Peer Indoor Navigation with Mobile Visual SLAM

Smartphone-Based Indoor Visual Navigation with Leader-Follower Mode

Feasibility Analysis of LTE-Based UAS Navigation in Deep Urban Areas and DSRC Augmentation

Multi-State Constraint Multipath-Assisted Positioning and Mismatch Alleviation

A Hybrid Indoor Localization And Navigation System With Map Matching For Pedestrians Using Smartphones

An Adaptive IMU/UWB Fusion Method for NLOS Indoor Positioning and Navigation

Enhancing Positioning in GNSS Denied Environments based on an Extended Kalman Filter Using Past GNSS Measurements and IMU

Tightly Coupled INS/APS Passive Single Beacon Navigation

Robust Localization for Mobile Targets Along a Narrow Path With LoS/NLoS Interference

Hybrid Active and Passive Sensing for SLAM in Wireless Communication Systems