Abstract:The two main polymorphs of boron nitride are hexagonal (h-BN) and cubic (c-BN) phases and both show attractive material properties to be employed under extreme environments. h-BN is also known as "white graphene" due to the matching hexagonal crystal symmetry and shows a layered structure which provides advantages as a lubricant material and as gate dielectrics for two-dimensional (2D) transistor channels. On the other hand, c-BN is analogous to another important elemental carbon material, diamond. While the mechanical strength of c-BN is lower than diamond, the thermal and chemical stability is even superior. Both h-BN and c-BN films are therefore strong candidates for applications under harsh ambient, including high-temperature, high-pressure, and corroding factors. BN films and coatings are conventionally grown using high-temperature CVD methods with typical substrate temperatures over 1000 o C. To reduce the deposition temperatures of this material while preserving the attractive crystal properties, alternative lower temperature physical and chemical vapor deposition strategies have been offered in the literature. Plasma-enhanced atomic layer deposition (PEALD) provides significant advantages over other methods such as precision thickness control, ultimate conformality, while reducing the growth temperature substantially. In our previous work, we had demonstrated the crystalline synthesis of h-BN films at substrate temperatures as low as 350 o C, while no growth was observed at lower substrate temperatures. In this work, we aim to demonstrate the feasibility of growing c-BN at substrate temperatures reaching 200 o C via a customized PEALD reactor featuring a large-diameter capacitively-coupled hollow-cathode plasma source with a relatively short source-to-substrate distance. We used Si(100), sapphire, and glass as the substrates to deposit the films. The growth temperature is kept between 150 and 250 °C, 10 sccm of N 2 flow is used as a carrier gas and Ar-purging gas flow was kept at 50 sccm. The triethylboron (TEB) precursor and various nitrogen plasma chemistries including different compositions of N 2 , H 2 , and Ar gases are utilized. The optimized growth condition is determined from in-situ monitored saturation studies, where the growth-per-cycle (GPC) parameter is noted for different precursor pulse time (15 and 30 ms), rf-plasma power (100 W to 250 W) and plasma-gas chemistries (N 2 -only, N 2 /H 2 , Ar/N 2 , Ar/N 2 /H 2 at varying ratios). While the 200 °C as-grown BN films exhibited nanocrystalline c-BN with relatively weak crystal peaks as verified by XRD measurements, vacuum annealing at 5 mTorr N 2 flow and 700 °C transformed the film structure into single-phase polycrystalline c-BN. The spectroscopic ellipsometer, x-ray reflectivity (XRR), and x-ray photoelectron spectroscopy (XPS) studies will be presented as well as the influence of post-deposition vacuum annealing to further improve the crystalline structure of c-BN films. Basic electrical properties of the grown BN films will be characterized using metal-insulator-semiconductor (MIS) diode temperature-dependent current-voltage (I-V) measurements. A specific effort will be devoted to enhance the as-grown film crystal properties via implementing novel atomic layer plasma annealing processes, which showed its potential for the ultrawide bandgap Ga 2 O 3 alloy. Another research question to be investigated is whether there is a possibility of tuning the material phase from cubic to hexagonal by carefully adjusting growth and in-situ Ar-plasma annealing conditions.

Atmospheric pressure plasma-assisted growth of hexagonal boron nitride nanosheets for improved aluminum hardness

Microstructural and mechanical properties of plasma sprayed boron nitride nanotubes reinforced alumina coating

Microstructural, phase, hardness, and oxidation resistance studies of AlN/h-BN-reinforced Ti6Al4V matrix composites synthesized by spark plasma sintering

Bio-inspired Synthesis of Highly Crystallized Hexagonal Boron Nitride Nanosheets

Cold‐Sprayed Boron‐Nitride‐Nanotube‐Reinforced Aluminum Matrix Composites with Improved Wear Resistance and Radiation Shielding

Improvement on the Surface Quality in Machining of Aluminum Alloy Involving Boron Nitride Nanoparticles

Growth and performance analysis of BAlN alloy thin film on Al substrate as a heat spreader for effective thermal management applications on white-based high-power LED

Structural and Mechanical Properties of Radiofrequency Ar-N2 Plasma Nitrided Aluminium

Ultrasound-Assisted Liquid-Phase Synthesis and Mechanical Properties of Aluminum Matrix Nanocomposites Incorporating Boride Nanocrystals

Stability of Wafer-Scale Thin Films of Vertically Aligned Hexagonal BN Nanosheets Exposed to High-Energy Ions and Reactive Atomic Oxygen

One-time mass production of AlN nanosheets: Synergistic effect of high-energy shear and effective collision in a sanding mill

Mechanical properties of boron nitride nano-sheet reinforced aluminium nanocomposite: a molecular dynamics study

Characterization of boron nitride nanosheets synthesized by boron-ammonia reaction

Structural and surface analysis of chemical vapor deposited boron doped aluminum nitride thin film on aluminum substrates

Low-Temperature Self-Limiting Growth of Cubic Boron Nitride Via Hollow-Cathode Plasma-Enhanced Atomic Layer Deposition

Fabrication of Alkali Metal Boride: Honeycomb‐Like Structured NaB4 with High Hardness and Excellent Electrical Conductivity

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Electron-Beam Synthesis and Modification and Properties of Boron Coatings on Alloy Surfaces

Synthesis and Characterization of Nanocrystalline Boron-Nitride Thin Films by Ion Milling and Thermal Treatment for Tribological Coatings: An Approach to Quantifying the Growth Dynamic Process

Boron nitride nanomaterials for thermal management applications

Armor for Steel: Facile Synthesis of Hexagonal Boron Nitride Films on Various Substrates (Adv. Mater. Interfaces 1/2024)