An autonomous design algorithm to experimentally realize three-dimensionally isotropic auxetic network structures without compromising density

Meng Shen,Marcos A. Reyes-Martinez,Louise Ahure Powell,Mark A. Iadicola,Abhishek Sharma,Fabian Byléhn,Nidhi Pashine,Edwin P. Chan,Christopher L. Soles,Heinrich M. Jaeger,Juan J. de Pablo

DOI: https://doi.org/10.1038/s41524-024-01281-y

IF: 12.256

2024-05-30

npj Computational Materials

Abstract:Auxetic materials have a negative Poisson's ratio and are of significant interest in applications that include impact mitigation, membrane separations and biomedical engineering. While there are numerous examples of structured materials that exhibit auxetic behavior, the examples of engineered auxetic structures is largely limited to periodic lattice structures that are limited to directional or anisotropic auxetic response. Structures that exhibit a three-dimensionally isotropic auxetic response have been, unfortunately, slow to evolve. Here we introduce an inverse design algorithm based on global node optimization to design three-dimensional auxetic metamaterial structures from disordered networks. After specifying the target Poisson's ratio for a structure, an inverse design algorithm is used to adjust the positions of all nodes in a disordered network structure until the desired mechanical response is achieved. The proposed algorithm allows independent control of shear and bulk moduli, while preserving the density and connectivity of the networks. When the angle bending stiffness in the network is kept low, it is possible to realize optimized structures with a Poisson's ratios as low as −0.6. During the optimization, the bulk modulus of these networks decreases by almost two orders of magnitude, but the shear modulus remains largely unaltered. The materials designed in this manner are fabricated by dual-material 3D-printing, and are found to exhibit the mechanical responses that were originally encoded in the computational design engine. The approach proposed here provides a materials-by-design platform that could be extended for engineering of optical, acoustic, and electrical properties, beyond the design of auxetic metamaterials.

materials science, multidisciplinary,chemistry, physical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to design network - structured materials with three - dimensional isotropic negative Poisson's ratio (auxetic) response without sacrificing the density of the materials. Specifically, the paper presents a reverse - design algorithm based on global node optimization for designing three - dimensional isotropic negative Poisson's ratio metamaterial structures from disordered networks. By specifying the target Poisson's ratio, this algorithm can adjust the positions of all nodes in the disordered network structure until the desired mechanical response is achieved. In addition, this algorithm allows for independent control of the shear modulus and the bulk modulus while keeping the density and connectivity of the network unchanged.

The key challenge in the paper lies in how to achieve a three - dimensional isotropic negative Poisson's ratio response while maintaining the material density, which has been rather difficult in previous research. Although traditional periodic lattice structures can achieve a negative Poisson's ratio, they are usually limited to directional or anisotropic responses and are difficult to meet the requirements of specific engineering applications, such as impact mitigation, membrane separation, and biomedical engineering. Therefore, the method proposed in this paper provides a new material design platform, which is not only applicable to the design of negative Poisson's ratio materials but can also be extended to the engineering design of optical, acoustic, and electrical properties.