Multisystem Interferometric Data Fusion Framework: A Three-Step Sensing Approach

Hanwen Yu,Ning Cao,Yang Lan,Mengdao Xing
DOI: https://doi.org/10.1109/tgrs.2020.3045093
IF: 8.2
2021-10-01
IEEE Transactions on Geoscience and Remote Sensing
Abstract:The recent, sharp increase in the availability of interferometric data captured by different synthetic aperture radar (SAR) interferometry (InSAR) sensors poses a new scientific question that whether there is a processing framework that can combine these observations to obtain a more credible InSAR product (i.e., digital elevation model (DEM) and surface deformation estimation). In this article, we extend our previous two-stage programming-based multibaseline processing framework for combining the interferograms generated from disparate InSAR systems with different system parameters to enhance the InSAR performance at the signal processing stage. The proposed multisystem interferometric data fusion framework, abbreviated as TSDFF, includes three processing steps: multisystem interferogram registration, multisystem phase unwrapping, and absolute phase fusing. The advantage of TSDFF is that it can allow the data sets from different InSAR sensors to help each other to get rid of the limitation of the Itoh condition so that the application scope of each InSAR sensor will be effectively enlarged (e.g., measuring violent surface change or mountainous DEM). In addition, to quantitatively analyze the measurement bias robustness bound of TSDFF, the TSDFF-Fusion theorem is proposed, which offers significant application guidance for TSDFF at different noise levels. The real and simulated experimental results reveal the effectiveness of TSDFF for fusing the data sets from disparate InSAR systems.
imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: with the sharp increase in the amount of interferometric data captured by different synthetic aperture radar interferometry (InSAR) sensors, is there a processing framework that can combine these observations to obtain more reliable InSAR products (i.e., digital elevation model (DEM) and surface deformation estimates). Specifically, the paper aims to design a robust multi - system interferometric data fusion framework for jointly processing interferograms from different InSAR sensors with different system parameters to generate InSAR products (such as DEM and surface deformation) with higher precision. ### Problem Definition The research problems are defined as follows: - Design a robust multi - system interferometric data fusion framework for jointly processing interferograms from different InSAR sensors with different system parameters to generate InSAR products (such as DEM and surface deformation) with higher precision. - Through this method, the data utilization rate of the existing InSAR system will be significantly improved, and more data sets will be used to extract the required application information. ### Background Traditional interferometric data fusion frameworks (TF) usually improve the precision of the final product by linearly combining data from different types of active sensors. However, traditional phase unwrapping (PU) methods have limitations, especially when there are drastic phase changes in the study area, which are restricted by the Itoh condition. Therefore, if the PU result is incorrect, taking the average directly may reduce the precision of the final InSAR product. ### Solution To solve these problems, the paper proposes a three - step multi - system interferometric data fusion framework (TSDFF), which includes the following three steps: 1. **Multi - system interferogram registration**: Design a multi - system interferogram registration method to fuse interferometric data at the signal processing stage. 2. **Multi - system phase unwrapping**: Apply the previous two - stage programming baseline (MB) PU framework (TSPA) to jointly unwrap interferograms from different InSAR systems and overcome the limitations of the Itoh condition. 3. **Absolute phase fusion**: Propose a fusion criterion considering PU errors to improve the precision of the final InSAR product. ### Main Contributions - **Multi - system interferogram registration**: Through an external coarse DEM model and a geometric coding process, achieve accurate registration of interferograms of different InSAR systems. - **Multi - system phase unwrapping**: Utilize the parameter diversity of different systems to transform the PU problem from an ill - posed problem to a well - posed problem and eliminate the limitations of the Itoh condition. - **Absolute phase fusion criterion**: Propose the TSDFF - Fusion theorem, which provides a quantitative measurement of the robustness boundary of deviation and guides the application of TSDFF under different noise levels. ### Experimental Verification The paper verifies the effectiveness of TSDFF through theoretical analysis and experimental verification. The experimental results show that TSDFF performs excellently in fusing data sets from different InSAR systems, especially when processing drastic surface changes or DEMs in mountainous areas. ### Conclusion TSDFF is an effective multi - system interferometric data fusion framework that can significantly improve the precision of InSAR products and expand the application range of each InSAR sensor.