This robot grows like a vine — and could help navigate disaster zones

Davide Castelvecchi

DOI: https://doi.org/10.1038/d41586-024-00140-6

IF: 64.8

2024-01-19

Nature

Abstract:Plant-inspired machines could one day prove useful in search-and-rescue scenarios. Plant-inspired machines could one day prove useful in search-and-rescue scenarios.

multidisciplinary sciences

What problem does this paper attempt to address?

Development and Testing of a Vine Robot for Urban Search and Rescue in Confined Rubble Environments

Zheyu Zhou,Yaqing Wang,Elliot W. Hawkes,Chen Li

2024-09-20

Abstract:The request for fast response and safe operation after natural and man-made disasters in urban environments has spurred the development of robotic systems designed to assist in search and rescue operations within complex rubble sites. Traditional Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) face significant limitations in such confined and obstructed environments. This paper introduces a novel vine robot designed to navigate dense rubble, drawing inspiration from natural growth mechanisms found in plants. Unlike conventional robots, vine robots are soft robots that can grow by everting their material, allowing them to navigate through narrow spaces and obstacles. The prototype presented in this study incorporates pneumatic muscles for steering and oscillation, an equation-based robot length control plus feedback pressure regulating system for extending and retracting the robot body. We conducted a series of controlled experiments in an artificial rubble testbed to assess the robot performance under varying environmental conditions and robot parameters, including volume ratio, environmental weight, oscillation, and steering. The results show that the vine robot can achieve significant penetration depths in cluttered environments with mixed obstacle sizes and weights, and can maintain repeated trajectories, demonstrating potential for mapping and navigating complex underground paths. Our findings highlight the suitability of the vine robot for urban search and rescue missions, with further research planned to enhance its robustness and deployability in real-world scenarios.

Robotics
A growing soft robot with climbing plant–inspired adaptive behaviors for navigation in unstructured environments

Emanuela Del Dottore,Alessio Mondini,Nick Rowe,Barbara Mazzolai

DOI: https://doi.org/10.1126/scirobotics.adi5908

IF: 25

2024-01-18

Science Robotics

Abstract:Self-growing robots are an emerging solution in soft robotics for navigating, exploring, and colonizing unstructured environments. However, their ability to grow and move in heterogeneous three-dimensional (3D) spaces, comparable with real-world conditions, is still developing. We present an autonomous growing robot that draws inspiration from the behavioral adaptive strategies of climbing plants to navigate unstructured environments. The robot mimics climbing plants' apical shoot to sense and coordinate additive adaptive growth via an embedded additive manufacturing mechanism and a sensorized tip. Growth orientation, comparable with tropisms in real plants, is dictated by external stimuli, including gravity, light, and shade. These are incorporated within a vector field method to implement the preferred adaptive behavior for a given environment and task, such as growth toward light and/or against gravity. We demonstrate the robot's ability to navigate through growth in relation to voids, potential supports, and thoroughfares in otherwise complex habitats. Adaptive twining around vertical supports can provide an escape from mechanical stress due to self-support, reduce energy expenditure for construction costs, and develop an anchorage point to support further growth and crossing gaps. The robot adapts its material printing parameters to develop a light body and fast growth to twine on supports or a tougher body to enable self-support and cross gaps. These features, typical of climbing plants, highlight a potential for adaptive robots and their on-demand manufacturing. They are especially promising for applications in exploring, monitoring, and interacting with unstructured environments or in the autonomous construction of complex infrastructures.

robotics
Branching Vine Robots for Unmapped Environments

Paul E Glick,Iman Adibnazari,Dylan Drotman,Donald Ruffatto Iii,Michael T Tolley

DOI: https://doi.org/10.3389/frobt.2022.838913

2022-03-24

Abstract:While exploring complex unmapped spaces is a persistent challenge for robots, plants are able to reliably accomplish this task. In this work we develop branching robots that deploy through an eversion process that mimics key features of plant growth (i.e., apical extension, branching). We show that by optimizing the design of these robots, we can successfully traverse complex terrain even in unseen instances of an environment. By simulating robot growth through a set of known training maps and evaluating performance with a reward heuristic specific to the intended application (i.e., exploration, anchoring), we optimized robot designs with a particle swarm algorithm. We show these optimization efforts transfer from training on known maps to performance on unseen maps in the same type of environment, and that the resulting designs are specialized to the environment used in training. Furthermore, we fabricated several optimized branching everting robot designs and demonstrated key aspects of their performance in hardware. Our branching designs replicated three properties found in nature: anchoring, coverage, and reachability. The branching designs were able to reach 25% more of a given space than non-branching robots, improved anchoring forces by 12.55×, and were able to hold greater than 100× their own mass (i.e., a device weighing 5 g held 575 g). We also demonstrated anchoring with a robot that held a load of over 66.7 N at an internal pressure of 50 kPa. These results show the promise of using branching vine robots for traversing complex and unmapped terrain.
Field Insights for Portable Vine Robots in Urban Search and Rescue

Ciera McFarland,Ankush Dhawan,Riya Kumari,Chad Council,Margaret Coad,Nathaniel Hanson

2024-11-11

Abstract:Soft, growing vine robots are well-suited for exploring cluttered, unknown environments, and are theorized to be performant during structural collapse incidents caused by earthquakes, fires, explosions, and material flaws. These vine robots grow from the tip, enabling them to navigate rubble-filled passageways easily. State-of-the-art vine robots have been tested in archaeological and other field settings, but their translational capabilities to urban search and rescue (USAR) are not well understood. To this end, we present a set of experiments designed to test the limits of a vine robot system, the Soft Pathfinding Robotic Observation Unit (SPROUT), operating in an engineered collapsed structure. Our testing is driven by a taxonomy of difficulty derived from the challenges USAR crews face navigating void spaces and their associated hazards. Initial experiments explore the viability of the vine robot form factor, both ideal and implemented, as well as the control and sensorization of the system. A secondary set of experiments applies domain-specific design improvements to increase the portability and reliability of the system. SPROUT can grow through tight apertures, around corners, and into void spaces, but requires additional development in sensorization to improve control and situational awareness.

Robotics
Vine Robots: Design, Teleoperation, and Deployment for Navigation and Exploration

Margaret M. Coad,Laura H. Blumenschein,Sadie Cutler,Javier A. Reyna Zepeda,Nicholas D. Naclerio,Haitham El-Hussieny,Usman Mehmood,Jee-Hwan Ryu,Elliot W. Hawkes,Allison M. Okamura

DOI: https://doi.org/10.1109/MRA.2019.2947538

2020-01-07

Abstract:A new class of continuum robots has recently been explored, characterized by tip extension, significant length change, and directional control. Here, we call this class of robots "vine robots," due to their similar behavior to plants with the growth habit of trailing. Due to their growth-based movement, vine robots are well suited for navigation and exploration in cluttered environments, but until now, they have not been deployed outside the lab. Portability of these robots and steerability at length scales relevant for navigation are key to field applications. In addition, intuitive human-in-the-loop teleoperation enables movement in unknown and dynamic environments. We present a vine robot system that is teleoperated using a custom designed flexible joystick and camera system, long enough for use in navigation tasks, and portable for use in the field. We report on deployment of this system in two scenarios: a soft robot navigation competition and exploration of an archaeological site. The competition course required movement over uneven terrain, past unstable obstacles, and through a small aperture. The archaeological site required movement over rocks and through horizontal and vertical turns. The robot tip successfully moved past the obstacles and through the tunnels, demonstrating the capability of vine robots to achieve navigation and exploration tasks in the field.

Robotics
High-curvature, high-force, vine robot for inspection

Mijaíl Jaén Mendoza,Nicholas D. Naclerio,Elliot W. Hawkes

2023-10-02

Abstract:Robot performance has advanced considerably both in and out of the factory, however in tightly constrained, unknown environments such as inside a jet engine or the human heart, current robots are less adept. In such cases where a borescope or endoscope can't reach, disassembly or surgery are costly. One promising inspection device inspired by plant growth are "vine robots" that can navigate cluttered environments by extending from their tip. Yet, these vine robots are currently limited in their ability to simultaneously steer into tight curvatures and apply substantial forces to the environment. Here, we propose a plant-inspired method of steering by asymmetrically lengthening one side of the vine robot to enable high curvature and large force application. Our key development is the introduction of an extremely anisotropic, composite, wrinkled film with elastic moduli 400x different in orthogonal directions. The film is used as the vine robot body, oriented such that it can stretch over 120% axially, but only 3% circumferentially. With the addition of controlled layer jamming, this film enables a steering method inspired by plants in which the circumference of the robot is inextensible, but the sides can stretch to allow turns. This steering method and body pressure do not work against each other, allowing the robot to exhibit higher forces and tighter curvatures than previous vine robot architectures. This work advances the abilities of vine robots--and robots more generally--to not only access tightly constrained environments, but perform useful work once accessed.

Robotics
A light- and heat-seeking vine-inspired robot with material-level responsiveness

Shivani Deglurkar,Charles Xiao,Luke F. Gockowski,Megan T. Valentine,Elliot W. Hawkes

DOI: https://doi.org/10.1109/LRA.2023.3329760

2023-09-15

Abstract:The fields of soft and bio-inspired robotics promise to imbue synthetic systems with capabilities found in the natural world. However, many of these biological capabilities are yet to be realized. For example, vines in nature direct growth via localized responses embedded in the cells of vine body, allowing an organism without a central brain to successfully search for resources (e.g., light). Yet to date, vine-inspired robots have yet to show such localized embedded responsiveness. Here we present a vine-inspired robotic device with material-level responses embedded in its skin and capable of growing and steering toward either a light or heat stimulus. We present basic modeling of the concept, design details, and experimental results showing its behavior in response to infrared (IR) and visible light. Our simple design concept advances the capabilities of bio-inspired robots and lays the foundation for future growing robots that are capable of seeking light or heat, yet are extremely simple and low-cost. Potential applications include solar tracking, and in the future, firefighting smoldering fires. We envision using similar robots to find hot spots in hard-to-access environments, allowing us to put out potentially long-burning fires faster.

Robotics
A Robot to Shape your Natural Plant: The Machine Learning Approach to Model and Control Bio-Hybrid Systems

Mostafa Wahby,Mary Katherine Heinrich,Daniel Nicolas Hofstadler,Payam Zahadat,Sebastian Risi,Phil Ayres,Thomas Schmickl,Heiko Hamann

DOI: https://doi.org/10.48550/arXiv.1804.06682

2018-04-18

Neural and Evolutionary Computing

Abstract:Bio-hybrid systems---close couplings of natural organisms with technology---are high potential and still underexplored. In existing work, robots have mostly influenced group behaviors of animals. We explore the possibilities of mixing robots with natural plants, merging useful attributes. Significant synergies arise by combining the plants' ability to efficiently produce shaped material and the robots' ability to extend sensing and decision-making behaviors. However, programming robots to control plant motion and shape requires good knowledge of complex plant behaviors. Therefore, we use machine learning to create a holistic plant model and evolve robot controllers. As a benchmark task we choose obstacle avoidance. We use computer vision to construct a model of plant stem stiffening and motion dynamics by training an LSTM network. The LSTM network acts as a forward model predicting change in the plant, driving the evolution of neural network robot controllers. The evolved controllers augment the plants' natural light-finding and tissue-stiffening behaviors to avoid obstacles and grow desired shapes. We successfully verify the robot controllers and bio-hybrid behavior in reality, with a physical setup and actual plants.
A Bioinspired Soft Robot Combining the Growth Adaptability of Vine Plants with a Coordinated Control System

Pengchun Li,Yongchang Zhang,Guangyu Zhang,Dekai Zhou,Longqiu Li

DOI: https://doi.org/10.34133/2021/9843859

IF: 11

2021-10-22

Research

Abstract:Tip-extending soft robots, taking flexible film or rubber as body material and fluid pressure as input power, exhibit excellent advantages in constrained and cluttered environments for detection and manipulation. However, existing soft continuum robots are of great challenges in achieving multiple, mutually independent, and on-demand active steering over a long distance without precise steering control. In this paper, we introduce a vine-like soft robot made up of a pressurized thin-walled vessel integrated with the high controllability of a control system with multiple degrees of freedom in three dimensions. Moreover, steering and kinematic models to relate the steering angle and robot length to the location of the robot tip are provided, and a dynamic finite element model for analyzing the motion of the spatial consecutive steering is established. We demonstrate the abilities of disinfection of the robot moving in a long and tortuous pipeline and detection in a multi-obstacle constrained environment. It is established that the robot exhibits great advantages in active consecutive steering over a long distance, high controllability in completing more complex path planning, and significant ability of carrying operational tools for ventilation pipeline disinfection and multi-obstacle detection. The bionic soft robot shows great promise for use in environment sensing, target detecting, and equipment servicing.

multidisciplinary sciences
A plant-inspired kinematic model for growing robots

B. Mazzolai,A. Sadeghi,A. Mondini,Emanuela Del Dottore

DOI: https://doi.org/10.1109/ROBOSOFT.2018.8404891

2018-04-24

Abstract:This paper presents a kinematic model inspired by plant growth strategies and used to describe the movement of a robotic root, able to self-build its body structure using a 3D printer-like mechanism embedded in its tip. The proposed model is implemented in simulation and validated through a comparative analysis of the position, in space, of the robotic and simulated tip, obtaining a maximal positional error of ∼7% with the smallest curvature radius within a curvature arc of ∼10 cm. The model is able to describe the motion of any robot that navigates its environment and moves by growing from the tip in a 3D space, and it has been validated on a plant-inspired robot. The new emerging generation of growing robots offers an alternative locomotion perspective in robotics, which is grounded on the ability of this kind of bioinspired robots to morphologically and dynamically adapt their body to surrounding environments, offering new scenarios of use in search and rescue tasks, and hazardous conditions.

Computer Science,Engineering
RoBoa: Construction and Evaluation of a Steerable Vine Robot for Search and Rescue Applications

Pascal Auf der Maur,Betim Djambazi,Yves Haberthür,Patricia Hörmann,Alexander Kübler,Michael Lustenberger,Samuel Sigrist,Oda Vigen,Julian Förster,Florian Achermann,Elias Hampp,Robert K. Katzschmann,Roland Siegwart

DOI: https://doi.org/10.1109/RoboSoft51838.2021.9479192

2022-03-29

Abstract:RoBoa is a vine-like search and rescue robot that can explore narrow and cluttered environments such as destroyed buildings. The robot assists rescue teams in finding and communicating with trapped people. It employs the principle of vine robots for locomotion, everting the tip of its tube to move forward. Inside the tube, pneumatic actuators enable lateral movement. The head carries sensors and is mounted outside at the tip of the tube. At the back, a supply box contains the rolled up tube and provides pressurized air, power, computation, as well as an interface for the user to interact with the system. A decentralized control scheme was implemented that reduces the required number of cables and takes care of the low-level control of the pneumatic actuators. The design, characterization, and experimental evaluation of the system and its crucial components is shown. The complete prototype is fully functional and was evaluated in a realistic environment of a collapsed building where the remote-controlled robot was able to repeatedly locate a trapped person after a travel distance of about 10 m.

Robotics
Plantoid: plant inspired robot for subsoil exploration and environmental monitoring

A. Mondini

2009-09-22

Abstract:Biorobotics is a novel approach in the realization of robot that merges different disciplines as Robotic and Natural Science. The concept of biorobotics has been identified for many years as inspiration from the animal world. In this thesis this paradigm has been extended for the first time to the plant world. Plants are an amazing organism with unexpected capabilities. They are dynamic and highly sensitive organisms, actively and competitively foraging for limited resources both above and below ground, and they are also organisms which accurately compute their circumstances, use sophisticated cost–benefit analysis, and take defined actions to mitigate and control diverse environmental insults. The objective of this thesis is to contribute to the realization of a robot inspired to plants, a plantoid. The plantoid robot includes root and shoot systems and should be able to explore and monitoring the environment both in the air and underground. These plant-inspired robots will be used for specific applications, such as in situ monitoring analysis and chemical detections, water searching in agriculture, anchoring capabilities and for scientific understanding of the plant capabilities/behaviours themselves by building a physical models. The scientific work performed in this thesis addressed different aspects of this innovative robotic platform development: first of all, the study of the plants‟ characteristics and the enabling technologies in order to design and to develop the overall plantoid system. The proposed system can be easily sub-divided in two major sections, the aerial part and the subsoil part. About the subsoil part, the activity focused on the realization of a miniaturized mechatronic system that imitates the behaviour of the plant radical apex. Plants show a peculiar directional growth in response to external stimulations, such as light (phototropism), gravity (gravitropism), touch (thigmotropism) or water/humidity gradient (hydrotropism). Tropisms frequently interact between and among each other, and the final grown form of the plant is influenced by such interactions. In order to imitate the powerful performances of the plant root system, a novel actuator has been proposed. This actuator is based on the osmotic principle (osmotic actuator) and, differently by the state-of-the-art actuators based on the osmotic principle, it has been designed in order to have a reversible reaction. This actuator permits to perform the elongation and the typical steering capabilities of the root apex, generating high forces with low power consumption (in the time scale of the plant). Theoretical studies on this actuator show interesting performances in terms of actuation pressure (more than 20 atm) with power in the order of some mW and with actuation in the hours scale time. The robotic root apex was designed to be equipped with sensors (gravity and moisture) to imitate the plants sensing characteristics, and with the novel osmotic actuator to drive the growth in the correct direction. An embedded microcontroller implements the basic root behaviour on the basis of the information coming from the sensors. About the aerial part the activity in this thesis was focused on the realization of a sort of environmental monitoring module in order to imitate the high sensing capabilities of the plants. This part has been designed and realized in a more traditional way, without attempt to imitate completely the plant behaviour but taking inspiration from the fundamental characteristics (energy scavenging, wide sensing capabilities and communication). In order to integrate a wide amount of sensors an innovative interface board that guarantees the conditioning of the sensor, with plug-and-play capabilities and low power consumption, was developed. Several aspects of the plantoid system are not faced yet and they will be part of the future works. In particular, the growing mechanism of the roots (some possible solutions are proposed and explained in this thesis) and the integration of chemical sensors in the root apex.

Environmental Science,Engineering
Dynamic modelling and predictive position/force control of a plant-inspired growing robot

Abdonoor Kalibala,Ayman Ali A Nada,Hiroyuki Ishii,Haitham El-Hussieny

DOI: https://doi.org/10.1088/1748-3190/ad8e25

IF: 2.9847

2024-11-04

Bioinspiration & Biomimetics

Abstract:This paper presents the development and control of a dynamic model for a plant-inspired growing robot, termed the "vine-robot," using the Euler-Lagrangian method. The unique growth mechanism of the vine-robot enables it to navigate complex environments by extending its body. We derive the dynamic equations of motion and employ model predictive control (MPC) to regulate the task space position, orientation, and interaction forces. Simulation experiments are conducted to evaluate the performance of the proposed model and control strategy. The results demonstrate that the model effectively achieves sub-millimeter precision in the position control in both static and time varying refrence trajectroies, and sub micronewton in force control.

robotics,engineering, multidisciplinary,materials science, biomaterials
Computer-Vision Based Real Time Waypoint Generation for Autonomous Vineyard Navigation with Quadruped Robots

Lee Milburn,Juan Gamba,Miguel Fernandes,Claudio Semini

2023-05-03

Abstract:The VINUM project seeks to address the shortage of skilled labor in modern vineyards by introducing a cutting-edge mobile robotic solution. Leveraging the capabilities of the quadruped robot, HyQReal, this system, equipped with arm and vision sensors, offers autonomous navigation and winter pruning of grapevines reducing the need for human intervention. At the heart of this approach lies an architecture that empowers the robot to easily navigate vineyards, identify grapevines with unparalleled accuracy, and approach them for pruning with precision. A state machine drives the process, deftly switching between various stages to ensure seamless and efficient task completion. The system's performance was assessed through experimentation, focusing on waypoint precision and optimizing the robot's workspace for single-plant operations. Results indicate that the architecture is highly reliable, with a mean error of 21.5cm and a standard deviation of 17.6cm for HyQReal. However, improvements in grapevine detection accuracy are necessary for optimal performance. This work is based on a computer-vision-based navigation method for quadruped robots in vineyards, opening up new possibilities for selective task automation. The system's architecture works well in ideal weather conditions, generating and arriving at precise waypoints that maximize the attached robotic arm's workspace. This work is an extension of our short paper presented at the Italian Conference on Robotics and Intelligent Machines (I-RIM).

Robotics
Hybrid Continuum-Eversion Robot: Precise Navigation and Decontamination in Nuclear Environments using Vine Robot

Mohammed Al-Dubooni,Cuebong Wong,Kaspar Althoefer

2024-08-27

Abstract:Soft growing vine robots show great potential for navigation and decontamination tasks in the nuclear industry. This paper introduces a novel hybrid continuum-eversion robot designed to address certain challenges in relation to navigating and operating within pipe networks and enclosed remote vessels. The hybrid robot combines the flexibility of a soft eversion robot with the precision of a continuum robot at its tip, allowing for controlled steering and movement in hard to access and/or complex environments. The design enables the delivery of sensors, liquids, and aerosols to remote areas, supporting remote decontamination activities. This paper outlines the design and construction of the robot and the methods by which it achieves selective steering. We also include a comprehensive review of current related work in eversion robotics, as well as other steering devices and actuators currently under research, which underpin this novel active steering approach. This is followed by an experimental evaluation that demonstrates the robot's real-world capabilities in delivering liquids and aerosols to remote locations. The experiments reveal successful outcomes, with over 95% success in precision spraying tests. The paper concludes by discussing future work alongside limitations in the current design, ultimately showcasing its potential as a solution for remote decontamination operations in the nuclear industry.

Robotics
A Robot System for Pruning Grape Vines

Tom Botterill,Scott Paulin,Richard Green,Samuel Williams,Jessica Lin,Valerie Saxton,Steven Mills,XiaoQi Chen,Sam Corbett‐Davies,Sam Corbett-Davies

DOI: https://doi.org/10.1002/rob.21680

IF: 6.385

2016-10-03

Journal of Field Robotics

Abstract:This paper describes a robot system for the automatic pruning of grape vines. A mobile platform straddles the row of vines, and it images them with trinocular stereo cameras as it moves. A computer vision system builds a three‐dimensional (3D) model of the vines, an artificial intelligence (AI) system decides which canes to prune, and a six degree‐of‐freedom robot arm makes the required cuts. The system is demonstrated cutting vines in the vineyard. The main contributions of this paper are the computer vision system that builds 3D vine models, and the test of the complete‐integrated system. The vine models capture the structure of the plants so that the AI system can decide where to prune, and they are accurate enough that the robot arm can reach the required cuts. Vine models are reconstructed by matching features between images, triangulating feature matches to give a 3D model, then optimizing the model and the robot's trajectory jointly (incremental bundle adjustment). Trajectories are estimated online at 0.25 m/s, and they have errors below 1% when modeling a 96 m row of 59 vines. Pruning each vine requires the robot arm to cut an average of 8.4 canes. A collision‐free trajectory for the arm is planned in intervals of 1.5 s/vine with a rapidly exploring random tree motion planner. The total time to prune one vine is 2 min in field trials, which is similar to human pruners, and it could be greatly reduced with a faster arm. Trials also show that the long chain of interdependent components limits reliability. A commercially feasible pruning robot should stop and prune each vine in turn.

robotics
Autonomous Vineyard Tracking Using a Four-Wheel-Steering Mobile Robot and a 2D LiDAR

Dimia Iberraken,Florian Gaurier,Jean-Christophe Roux,Colin Chaballier,Roland Lenain

DOI: https://doi.org/10.3390/agriengineering4040053

2022-09-22

AgriEngineering

Abstract:The intensive advances in robotics have deeply facilitated the accomplishment of tedious and repetitive tasks in our daily lives. If robots are now well established in the manufacturing industry, thanks to the knowledge of the environment, this is still not fully the case for outdoor applications such as in agriculture, as many parameters are varying (kind of vegetation, perception conditions, wheel–soil interaction, etc.) The use of robots in such a context is nevertheless important since the reduction of environmental impacts requires the use of alternative practices (such as agroecological production or organic production), which require highly accurate work and frequent operations. As a result, the design of robots for agroecology implies notably the availability of highly accurate autonomous navigation processes related to crop and adapting to their variability. This paper proposes several contributions to the problem of crop row tracking using a four-wheel-steering mobile robot, which straddles the crops. It uses a 2D LiDAR allowing the detection of crop rows in 3D thanks to the robot motion. This permits the definition of a reference trajectory that is followed using two different control approaches. The main targeted application is navigation in vineyard fields, to achieve several kinds of operation, such as monitoring, cropping, or accurate spraying. In the first part, a row detection strategy based on a 2D LiDAR inclined in front of the robot to match a predefined shape of the vineyard row in the robot framework is described. The successive detected regions of interest are aggregated along the local robot motion, through the system odometry. This permits the computation of a local trajectory to be followed by a robot. In a second part, a control architecture that allows the control of a four-wheel-steering mobile robot is proposed. Two different strategies are investigated, one is based on a backstepping approach, while the second considers independently the regulation of front and rear steering axle position. The results of these control laws are then compared in an extended simulation framework, using a 3D reconstruction of actual vineyards in different seasons.
A Multi-Segment, Soft Growing Robot with Selective Steering

Alexander M. Kübler,Sebastián Urdaneta Rivera,Frances B. Raphael,Julian Förster,Roland Siegwart,Allison M. Okamura

DOI: https://doi.org/10.48550/arXiv.2212.03951

IF: 3.7

2022-12-07

Robotics

Abstract:Everting, soft growing vine robots benefit from reduced friction with their environment, which allows them to navigate challenging terrain. Vine robots can use air pouches attached to their sides for lateral steering. However, when all pouches are serially connected, the whole robot can only perform one constant curvature in free space. It must contact the environment to navigate through obstacles along paths with multiple turns. This work presents a multi-segment vine robot that can navigate complex paths without interacting with its environment. This is achieved by a new steering method that selectively actuates each single pouch at the tip, providing high degrees of freedom with few control inputs. A small magnetic valve connects each pouch to a pressure supply line. A motorized tip mount uses an interlocking mechanism and motorized rollers on the outer material of the vine robot. As each valve passes through the tip mount, a permanent magnet inside the tip mount opens the valve so the corresponding pouch is connected to the pressure supply line at the same moment. Novel cylindrical pneumatic artificial muscles (cPAMs) are integrated into the vine robot and inflate to a cylindrical shape for improved bending characteristics compared to other state-of-the-art vine robots. The motorized tip mount controls a continuous eversion speed and enables controlled retraction. A final prototype was able to repeatably grow into different shapes and hold these shapes. We predict the path using a model that assumes a piecewise constant curvature along the outside of the multi-segment vine robot. The proposed multi-segment steering method can be extended to other soft continuum robot designs.
Pheno-Robot: An Auto-Digital Modelling System for In-Situ Phenotyping in the Field

Yaoqiang Pan,Kewei Hu,Tianhao Liu,Chao Chen,Hanwen Kang

2024-02-15

Abstract:Accurate reconstruction of plant models for phenotyping analysis is critical for optimising sustainable agricultural practices in precision agriculture. Traditional laboratory-based phenotyping, while valuable, falls short of understanding how plants grow under uncontrolled conditions. Robotic technologies offer a promising avenue for large-scale, direct phenotyping in real-world environments. This study explores the deployment of emerging robotics and digital technology in plant phenotyping to improve performance and efficiency. Three critical functional modules: environmental understanding, robotic motion planning, and in-situ phenotyping, are introduced to automate the entire process. Experimental results demonstrate the effectiveness of the system in agricultural environments. The pheno-robot system autonomously collects high-quality data by navigating around plants. In addition, the in-situ modelling model reconstructs high-quality plant models from the data collected by the robot. The developed robotic system shows high efficiency and robustness, demonstrating its potential to advance plant science in real-world agricultural environments.

Robotics
A Map-Free LiDAR-Based System for Autonomous Navigation in Vineyards

Riccardo Bertoglio,Veronica Carini,Stefano Arrigoni,Matteo Matteucci

2023-07-06

Abstract:Agricultural robots have the potential to increase production yields and reduce costs by performing repetitive and time-consuming tasks. However, for robots to be effective, they must be able to navigate autonomously in fields or orchards without human intervention. In this paper, we introduce a navigation system that utilizes LiDAR and wheel encoder sensors for in-row, turn, and end-row navigation in row structured agricultural environments, such as vineyards. Our approach exploits the simple and precise geometrical structure of plants organized in parallel rows. We tested our system in both simulated and real environments, and the results demonstrate the effectiveness of our approach in achieving accurate and robust navigation. Our navigation system achieves mean displacement errors from the center line of 0.049 m and 0.372 m for in-row navigation in the simulated and real environments, respectively. In addition, we developed an end-row points detection that allows end-row navigation in vineyards, a task often ignored by most works.

Robotics

This robot grows like a vine — and could help navigate disaster zones

Development and Testing of a Vine Robot for Urban Search and Rescue in Confined Rubble Environments

A growing soft robot with climbing plant–inspired adaptive behaviors for navigation in unstructured environments

Branching Vine Robots for Unmapped Environments

Field Insights for Portable Vine Robots in Urban Search and Rescue

Vine Robots: Design, Teleoperation, and Deployment for Navigation and Exploration

High-curvature, high-force, vine robot for inspection

A light- and heat-seeking vine-inspired robot with material-level responsiveness

A Robot to Shape your Natural Plant: The Machine Learning Approach to Model and Control Bio-Hybrid Systems

A Bioinspired Soft Robot Combining the Growth Adaptability of Vine Plants with a Coordinated Control System

A plant-inspired kinematic model for growing robots

RoBoa: Construction and Evaluation of a Steerable Vine Robot for Search and Rescue Applications

Plantoid: plant inspired robot for subsoil exploration and environmental monitoring

Dynamic modelling and predictive position/force control of a plant-inspired growing robot

Computer-Vision Based Real Time Waypoint Generation for Autonomous Vineyard Navigation with Quadruped Robots

Hybrid Continuum-Eversion Robot: Precise Navigation and Decontamination in Nuclear Environments using Vine Robot

A Robot System for Pruning Grape Vines

Autonomous Vineyard Tracking Using a Four-Wheel-Steering Mobile Robot and a 2D LiDAR

A Multi-Segment, Soft Growing Robot with Selective Steering

Pheno-Robot: An Auto-Digital Modelling System for In-Situ Phenotyping in the Field

A Map-Free LiDAR-Based System for Autonomous Navigation in Vineyards