Abstract:In these studies of fix boron compounds, associations between tannins and boron (TB) in the form of boric acid appear to be of interest. These TB associations allow the use of boron at very low levels (in compliance with EU restrictions, 2008/58/EC) and limit boron leaching which maintains biological resistance and fire retardant properties. As a consequence, TB wooden products present an extended service life compared to boron compounds alone and were designed to be environmentally-friendly wood protection systems. A follow-up of tannin‑boron use identified the environmental impacts using a life cycle assessment (LCA). This LCA was performed on tannin‑boron preservative products as well as several industrial preservative-treated timbers and concrete used in the landscape. Cr-containing inorganic salt and an alkaline copper quaternary preservative formulation, as well as concrete, have been used as referential materials to compare the environmental footprint with the tannin‑boron treated system. A model was created with life cycle stages used to calculate inputs and outputs during raw material extraction, supplier transportation, manufacturing process, distribution, disposal transportation and processing. Tannin production data were based on Vieira et al. in the field of condensed tannin extraction. However, the extracted tannin in the extraction yield, the inorganic salt, and the process applied are not perfectly comparable with the extraction conditions industrially applied for the Mimosa (Acacia mearnsii) extract which is the major constituent of the TB formulations. The latter is counter-current water extracted without any chemicals or with a limited amount of NaHSO3 or Na2SO3 (at 0.5 % to 1 %) - at a temperature of 70-90 °C. Unfortunately these parameters cannot be elaborated by the LCA program because there is no data available for the production of Na bisulphite or Na bicarbonate in the LCI data used. Other input data were sourced from the ecoinvent v3.8 database. The ReCiPe midpoint method was used to assess the environmental footprint and the CED method was chosen to analyze a general view of the energy-related environmental impacts in the life cycle. Overall, the results demonstrated that tannin‑boron preservatives can be regarded as a low-environmental impact formulation. Additionally, an economic analysis of the development of a commercially-viable tannin‑boron preservative would now be timely.

Novel and Green System for Protecting Wood against Gloeophyllum trabeum by Combining Biodegradable Isothiazolinone with Nontoxic Chelators

Decay resistance and mechanical strength of poplar wood treated after injection treatment to living trees using ammoniacal copper quaternary/carbon dots

Construction Strategy and Mechanism of a Novel Wood Preservative with Excellent Antifungal Effects

Green Chemical Treatment of Natural Wood Material for Decay Resistance by 3-Iodo-2-propynyl Butyl Carbamate (ipbc) with Supercritical Co2 As A Carrier Solvent

Proteomics Reveals Octyl Gallate as an Environmentally Friendly Wood Preservative Leading to Reactive Oxygen Species-Driven Metabolic Inflexibility and Growth Inhibition in White-Rot Fungi (Lenzites betulina and Trametes versicolor)

Use of fungal metabolites to protect wood-based panels against mould infection

Eco-friendly and Mildly Modification of Wood Cell Walls with Heat Treated Wood Extracts to Improve Wood Decay Resistance

Isolation and identification of the antibacterial compounds in Coptis chinensis for the preservation of wood

Study of Nano Colloidal Silica Sol Based Protectant on the Prevention of Masson Pine.

Enhanced Degradation of DDT Using a Novel Iron-Assisted Hydrochar Catalyst Combined with Peroxymonosulfate: Experiment and Mechanism Analysis.

Ultra-Pressurized Deposition of Hydrophobic Chitosan Surface Coating on Wood for Fungal Resistance

Comparative Copper Resistance Strategies of Rhodonia placenta and Phanerochaete chrysosporium in a Copper/Azole-Treated Wood Microcosm

Life cycle assessment of a novel tannin-boron association for wood protection

Preparation and Properties of Nitrogen-Phosphorus-Boron Wood Protective Agent

A Sustainable Treatment for Wood Preservation: Enzymatic Grafting of Wood Extractives

Carbon dots: building a robust optical shield for wood preservation

Conservation of model degraded pine wood with selected organosilicons studied by XFM and nanoindentation

Improvement of Wood Decay Resistance with Cinnamaldehyde Chitosan Emulsion

Changes in Chemical Composition, Crystallizability, and Microstructure of Decayed Wood-Fiber-Mat-Reinforced Composite Treated with Copper Triazole Preservative

Tetracycline degradation by activated persulfate with enhancement of ZIF-67 loaded wood-microreactor