Abstract:The mechanical qualities of natural fiber (NF) -based polymer composites are superior, making them advantageous and these composites are environmentally beneficial. The current investigation involved the fabrication of hybrid composites using Calotropis gigantea (CGF) and Abaca Fiber (AF) as reinforcements in epoxy matrix. The hand layup technique was employed for the fabricating process. Subsequently, the composites were investigated and analysed for their water absorption rate, tribological performance, and mechanical properties. This study aims to uncover a noteworthy combination of NF reinforced polymer composites that can be utilized in commercial Engineering applications. The mechanical properties were examined by measuring their hardness, impact resistance, flexural strength (FS), Compressive strength (CS), and tensile strength (TS). Furthermore, the broken surfaces of tensile sample were inspected utilizing a scanning electron microscope. Composite specimens were immensed in distilled water and their water penetration percentages were measured to ascertain their water absorption (WA) properties. The tribological performance was analysed utilizing a pin-on-disc equipment to assess the specific wear rate and coefficient of friction. The outcomes demonstrated that the hybrid composites surpassed the single-fiber composites in all variations. Sample G exhibited superior properties in all combinations, with a TS of 36.19 MPa and tensile modulus of 328.95 MPa. Additionally, it shows that higher flexural strength of 43.85 MPa and flexural modulus values of 350.84 MPa. Furthermore, it demonstrated higher Compressive strength of 94.45 MPa and modulus values of 576.93 MPa. Moreover, it exhibited a higher impact value of 53.88 kJ/m 2 and higher hardness value of 44.07 HV. This material is well-suited for non-structural uses in electronics and electrical insulating boards and components, as the results show that a combination of CGF and AF fibers with an epoxy matrix improves mechanical qualities.

Study on the characteristics of novel natural fiber extracted from Coccinia grandis plant vine: a novel material for engineering applications

Key Characteristics of a Novel Silk Yarn from Fresh Cocoons

Characterization of novel natural cellulosic fiber extracted from the stem of Cissus vitiginea plant

Coccinia grandis stem fiber polymer composite: thermal and mechanical analysis

Novel Cellulosic Natural Fibers from Abelmoschus Ficulneus Weed: Extraction and Characterization for Potential Application in Polymer Composites

Extraction and characterization of fiber from the flower stalk of Sansevieria cylindrica

Extraction and characterization of Bougainvillea glabra fibers: A study on chemical, physical, mechanical and morphological properties

Characterization and In vitro biocompatibility analysis of nanocellulose scaffold for tissue engineering application

Extraction and Characterization of a New Natural Cellulosic Fiber from Bark of Ficus Carica Plant as Potential Reinforcement for Polymer Composites

Developing and Screening of a Bacteria-Fighting and Moisture-Controlling Coccinia grandis and Poly(vinyl alcohol) Electrospun Nanofibrous Mat

Extraction, purification, and characterization of novel plant fiber from Tabernaemontana divaricate stem to use as reinforcement in polymer composites

Characterization and potential applications of Grewia hirsuta fibers: nature's own composite materials

Analysis of physical and mechanical characteristics of tropical natural fibers for their use in civil engineering applications

Enhanced Antibacterial Efficiency of Cellulosic Fibers: Microencapsulation and Green Grafting Strategies

Mechanical, machinability and water absorption properties of novel kenaf fiber, glass fiber and graphene composites reinforced with epoxy

The Encapsulation of Bioactive Plant Extracts into the Cellulose Microfiber Isolated from G. optiva Species for Biomedical Applications

Investigation of mechanical, thermal, and chemical properties of raw and NaOH-treated bagasse/halfa grass/coir fiber

Development of Luminescent and Photosensitive Cellulose Microfibers From Palm Sprout Fibers: Antibacterial Efficacy and Dye Adsorption Potential

Investigation on the mechanical, water absorption, and tribological performance of calotropis gigantea and abaca fiber reinforced epoxy composites

Innovations in biocompatible materials: exploring the potential of cellulose nanocrystals from grape pomace

Design and Development of Bamboo and Cotton Blended Fabric using Natural Antibacterial Coating for Infant Clothing