Abstract:The sluggish redox kinetics and the severe shuttle effect of soluble lithium polysulfides (LiPSs) are the main key issues which would hinder the development of lithium-sulfur (Li-S) batteries. In this work, a nickel-doped vanadium selenide in-situ grows on reduced graphene oxide(rGO) to form a two-dimensional (2D) composite Ni-VSe 2 /rGO by a simple solvothermal method. When it is used as a modified separator in Li-S batteries, the Ni-VSe 2 /rGO material with the doped defect and super-thin layered structure can greatly adsorb LiPSs and catalyze the conversion reaction of LiPSs, resulting in effectively reducing LiPSs diffusion and suppressing the shuttle effect. More importantly, the cathode-separator bonding body is first developed as a new strategy of electrode-separator integration in Li-S batteries, which not only could decrease the LiPSs dissolution and improve the catalysis performance of the functional separator as the upper current-collector, but also is good for the high sulfur loading and the low electrolyte/sulfur (E/S) ratio for high energy density Li-S batteries. When the Ni-VSe 2 /rGO-PP (polypropylene, Celgard 2400) modified separator is applied, the Li-S cell can retain 510.3 mA h g -1 capacity after 1190 cycles at 0.5 C. In the electrode-separator integrated system, the Li-S cell can still maintain 552.9 mA h g -1 for 190 cycles at a sulfur loading 6.4 mg cm -2 and 4.9 mA h cm -2 for 100 cycles at a sulfur loading 7.0 mg cm -2 . The experimental results indicate that both the doped defect engineering and the super-thin layered structure design might optimally be chosen to fabricate a new modified separator material, and especially, the electrode-separator integration strategy would open a practical way to promote the electrochemical behavior of Li-S batteries with high sulfur loading and low E/S ratio.

Reducing polarization of lithium-sulfur batteries via ZnS/reduced graphene oxide accelerated lithium polysulfide conversion

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Synergistic mediation of polysulfide immobilization and conversion by a catalytic and dual-adsorptive system for high performance lithium-sulfur batteries

Reduced graphene oxide wrapped ZnCo layered double hydroxides microsphere as efficient sulfur host in lithium-sulfur batteries

A Self–Regulatory Organosulfur Copolymer Cathode towards High Performance Lithium–Sulfur Batteries

Tailored ZnO-ZnS heterostructure enables a rational balancing of strong adsorption and high catalytic activity of polysulfides for Li-S batteries

Boosting Polysulfide Confinement and Redox Kinetics Via ZnSe/NC@rGO As Separator Modifier for High-Performance Lithium-Sulfur Batteries

Reduced Graphene Oxide Embedded with ZnS Nanoparticles as Catalytic Cathodic Material for Li-S Batteries

ZnFe2O4 hollow rods enabling accelerated polysulfide conversion for advanced lithium-sulfur batteries

Ultrahigh Sulfur Loading in ZnS1-x/rGO Through in Situ Oxidation-Refilling Route for High-Performance Li-S Batteries

Fabricating Ultrathin ZrB2/Graphene Oxide/carboxymethocel Layer Onto Cathode As Effective Polysulfide Shuttling Barrier for Li–S Battery

Hybrid Ascharite/Reduced Graphene Oxide with Polysulfide Adsorption Host for Advanced Lithium-Sulfur Batteries

Oxidation States Regulation of Cobalt Active Sites through Crystal Surface Engineering for Enhanced Polysulfide Conversion in Lithium–Sulfur Batteries

Reduced porous carbon/N-doped graphene nanocomposites for accelerated conversion and effective immobilization of lithium polysulfides in lithium-sulfur batteries

Improving Performances of Lithium-Sulfur Cells via Regulating of VSe 2 Functional Mediator with Doping-Defect Engineering and Electrode-Separator Integration Strategy

Synergetic effect of block and catalysis on polysulfides by functionalized bilayer modification on the separator for lithium-sulfur batteries

Nitrogen‐Doped Graphene‐Supported Mixed Transition‐Metal Oxide Porous Particles to Confine Polysulfides for Lithium–Sulfur Batteries

Catalytic Effects in the Cathode of Li-S Batteries: Accelerating polysulfides redox conversion

Rational Design of Graphene Oxide Wrapped Porous Microspheres As High-Performance Sulfur Cathode in Lithium-Sulfur Batteries