Abstract:Scheme of MXene as conductive binders for both high‐voltage cathode and high‐rate anode is demonstrated. The scheme shows MXene inks as conductive binders for both cathode and anode. The excellent mechanical and electrical properties enabled by the interconnected, resilient MXene nanosheet network ensure excellent charge transport, while simultaneously decreasing the inactive component's weight, resulting in a high‐voltage cathode and high‐rate anode. The ever‐increasing popularity of smart electronics demands advanced Li‐ion batteries capable of charging faster and storing more energy, which in turn stimulates the innovation of electrode additives. Developing single‐phase conductive networks featuring excellent mechanical strength/integrity coupled with efficient electron transport and durability at high‐voltage operation should maximize the rate capability and energy density, however, this has proven to be quite challenging. Herein, it is shown that a 2D titanium carbide (known as MXene) metallic membrane can be used as single‐phase interconnected conductive binder for commercial Li‐ion battery anode (i.e., Li4Ti5O12) and high‐voltage cathodes (i.e., Ni0.8Mn0.1Co0.1O2). Electrodes are fabricated directly by slurry‐casting of MXene aqueous inks composited with active materials without any other additives or solvents. The interconnected metallic MXene membrane ensures fast charge transport and provides good durability, demonstrating excellent rate performance in the Li//Li4Ti5O12 cell (90 mAh g−1 at 45 C) and high reversible capacity (154 mAh g−1 at 0.2 C/0.5 C) in Li//Ni0.8Mn0.1Co0.1O2 cell coupled with high‐voltage operation (4.3 V vs Li/Li+). The LTO//NMC full cell demonstrates promising cycling stability, maintaining capacity retention of 101.4% after 200 cycles at 4.25 V (vs Li/Li+) operation. This work provides insights into the rational design of binder‐free electrodes toward acceptable cyclability and high‐power density Li‐ion batteries.

High-zeta-potential accelerates interface charge transfer in lithium anodes via MXene-graphdiyne heterojunction layers

Influence of MXene-assisted multifunctional interface on zinc deposition toward highly reversible dendrite-free zinc anodes

Interconnected Metallic Membrane Enabled by MXene Inks Toward High‐Rate Anode and High‐Voltage Cathode for Li‐Ion Batteries

MXene Aerogel Scaffolds for High‐Rate Lithium Metal Anodes

Constructing Artificial SEI Layer on Lithiophilic MXene Surface for High‐Performance Lithium Metal Anodes

Cation-Loaded Porous Mg2+-Zeolite Layer Direct Dendrite-Free Deposition toward Long-Life Lithium Metal Anodes

Low‐Tortuous MXene (TiNbC) Accordion Arrays Enabled Fast Ion Diffusion and Charge Transfer in Dendrite‐Free Lithium Metal Anodes

Stable dendrite-free Zn anode with Janus MXene-Ag interfacial bifunctional protective layer for aqueous zinc-ion batteries

Eliminating Lightning‐Rod Effect of Lithium Anodes via Sine‐Wave Analogous MXene Layers

Lithiophilic SiO2 nanoparticle pillared MXene nanosheets for stable and dendrite-free lithium metal anodes

Highly Reversible Zn Metal Anodes Enabled by Freestanding, Lightweight, and Zincophilic MXene/Nanoporous Oxide Heterostructure Engineered Separator for Flexible Zn-MnO2 Batteries.

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

(Invited) A Doped Mxene Dual Layer for Reliable Lithium Metal Anode

Achieving high-rate and long-life Zn metal anodes via constructing interfacial gradient heterostructure

Covalently bonded MXene@Antimonene heterostructure anode for fast lithium-ion storage

A multifunctional MXene-porous polydopamine interface for stable and dendrite-free zinc metal batteries

Lithium Zinc/Lithium Iodide Composite Modified Layer toward Highly Stable Lithium Metal Anodes

Uniform Zinc Deposition Regulated by a Nitrogen‐Doped MXene Artificial Solid Electrolyte Interlayer

MXene-based porous and robust 2D/2D hybrid architectures with dispersed Li3Ti2(PO4)3 as superior anodes for lithium-ion battery

Micro‐/Mesoporous Zinc–Manganese Oxide/Graphene Hybrids with High Specific Surface Area: A High‐Capacity, Superior‐Rate, and Ultralong‐Life Anode for Lithium Storage

Spherical Lithium Deposition Enables High Li‐Utilization Rate, Low Negative/Positive Ratio, and High Energy Density in Lithium Metal Batteries