Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. The research objectives of pilot diesel injection (PDI) ignition natural gas technology include high efficiency, clean combustion, and low pilot diesel mass. This study is based on a single-cylinder thermodynamic engine, combined with the CONVERGE simulation model and CHEMKIN chemical reaction kinetics model. The effects and mechanisms of various PDI strategies on the mixture equivalent ratio, temperature, and characteristics of combustion and emissions were investigated. The experimental results showed that the best PDI mass was 8 mg/cycle. The thermal atmosphere and activity in the cylinder were improved with an increase in PDI mass from 2 to 8 mg/cycle, which stabilized the mixture combustion. Further, the effects of different pilot injection timing (PIT) on combustion and emissions were investigated via experiments and simulation by controlling the operating conditions and maintaining a constant PDI total mass. The results show that the diesel had a single low-temperature reaction path when the PIT was close to the top dead center, whereas the PIT at the early stage of the compression stroke (CS) changed the chemical reaction path and accelerated the transformation of CH3 to CH2O, accumulating numerous active groups and accelerating the combustion rate, which is difficult to control the ignition phase. The reaction path of the double PDI strategy was similar to that of the PIT at the early CS stage, and its combustion is closed to premixed combustion; however, the accumulation of active groups was relatively small, and the combustion rate was relatively slow because the ignition phase was controlled by the second PDI, making the combustion phase easy to control. Finally, with the double PDI strategy that had the advantages of efficient combustion and avoidance of knock, the gross indicated thermal efficiency reached 49.3% that involved a −60°crank angle (CA) after top dead center (ATDC) first injection and −4°CA ATDC second injection.

The effect of pine oil/diesel blend on particulate emission characteristics of a diesel engine under pre-injection strategy with EGR

Investigation on Combustion and Emission Characteristics of Diesel Polyoxymethylene Dimethyl Ethers Blend Fuels with Exhaust Gas Recirculation and Double Injection Strategy

Effect of Pre-Injection Strategy on the Reduction of Exhaust Emissions from N-Pentanol/biodiesel Engine

Particulate Matter Chemical Characteristics from a Light-Duty Diesel Engine Fueled with PODE/Diesel Blends

Investigating the combined effect of thermal barrier coating and antioxidants on pine oil in DI diesel engine

Experimental and numerical study on flow, combustion and emission characteristics of CI engine fueled with n-butanol/diesel blends under post-injection strategy

Impacts of pine oil and hydrogen induction with hemp oil methyl ester on dual fuel reactivity controlled compression ignition combustion in diesel engine

NOx emission reduction in low viscous low cetane (LVLC) fuel using additives in CI engine: an experimental study

Effect of gasoline aromatic compositions coupled with single and double injection strategy on GDI engine combustion and emissions

Particulate matter characteristics of a light-duty diesel engine with alternative fuel blends

Combination of High Cetane Diesel Fuel and Post Injection Mode in a Diesel Engine: A Path towards Lower Exhaust Emissions

Effect of Injection Strategy on Emission Characteristics of Compression Ignition Engine Fueled with Blended Fuel

Effects of pilot injection strategy on in-cylinder combustion and emission characteristics of PODE/methanol blends

Optimization of palm oil biodiesel blends and engine operating parameters to improve performance and PM morphology in a common rail direct injection diesel engine

Optimising the Particulate Emission Characteristics of a Dual-Fuel Spark Ignition Engine by Changing the Gasoline Direct Injection Strategy

Effects and mechanism of pilot diesel injection strategies on combustion and emissions of natural gas engine

Influence of fuel system variations on performance and emission characteristics of combined air-wall-guided mode modified GDI engine with alcoholic fuels and exhaust gas recirculation

Effect of soybean oil/PODE/ethanol blends on combustion and emissions on a heavy-duty diesel engine

Utilization of non-edible bio-feedstock Pongamia Pinnata-diethyl ether ternary fuel blend supplemented with graphene oxide nanoparticles on CRDi engine characteristics

Experimental studies of combustion and emission characteristics of diesel engine fueled with diesel/cyclopentanone blend

Effects of Dual Injection Operations on Combustion Performances and Particulate Matter Emissions in a Spark Ignition Engine Fuelled with Second-Generation Biogasoline