Abstract:This work describes fabrication of Fe 3 O 4 @SiO 2 core–shell nanoparticles functionalized with polyvinyl alcohol (PVA) and its application for the removal of Cu(П) and Cd(П) ions. Surface chemistry and morphology during functionalization of Fe 3 O 4 @SiO 2 NPs were evaluated utilizing Fourier transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis, vibration sample magnetometer, transmission electron microscope, field emission scanning electron microscope, and dynamic light scattering. The performance of the PVA-modified magnetic nanoparticles for Cu(П) and Cd(П) ions removal was evaluated by changing five process variables: contact time of adsorbent, temperature, pH, adsorbent dosage, and initial concentration. The highest removal efficiency was observed at a pH value of 7, an adsorbent dose of 15 mg, an initial concentration of 0.5 mmol/L, and a contact time of 25 min for Cu(II), while these values are 7, 15 mg, 0.4 mmol/L, and 20 min for Cd(II), respectively. The adsorption equilibrium is well explained by Langmuir adsorption isotherms which namely monolayer adsorption. The adsorption isotherm studies of the novel adsorbent in removing target ions from wastewater showed that the maximum adsorption amounts of Cu(П) and Cd(П) were 1.57 and 0.99 mmol/g at 35 °C. According to the calculated parameters and fitting model, the kinetics adsorption data are well fitted to the pseudo-second-order kinetic model which suggests that the main rate-determining step was chemisorption's. According to the results, the prepared composite possesses excellent adsorption efficiency to be applied for the preconcentration of target heavy metal ions in the field of water treatment. The new adsorbent is completely separated from the aqueous solution under external magnetic field for five consecutive cycles without significant loss of activity.

Synthesis of nano magnetic chitosan modified with acrylamide schiff's base for simultaneous removal of Cu(II) and Co(II) from waste water samples

Chitosan-based nano-sorbents: synthesis, surface modification, characterisation and application in Cd (II), Co (II), Cu (II) and Pb (II) ions removal from wastewater

Preparation and characterization of magnetic chelating resin based on chitosan for adsorption of Cu(II), Co(II), and Ni(II) ions

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Magnetic chitosan modified with cysteine-glutaraldehyde as adsorbent for removal of heavy metals from water

Preparation and Characterization of Magnetic Chitosan Nanoparticles and Its Application for Cu(II) Removal

Effective Adsorption of U(VI) from Aqueous Solution Using Magnetic Chitosan Nanoparticles Grafted with Maleic Anhydride: Equilibrium, Kinetic and Thermodynamic Studies

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Biosorptive removal of cobalt(II) from aqueous solutions using magnetic cyanoethyl chitosan beads

A Novel Adsorbent of Core-Shell Construction of Chitosan-Cellulose Magnetic Carbon Foam: Synthesis, Characterization and Application to Remove Copper in Wastewater

Adsorption of Cu(II), Co(II), and Ni(II) ions by modified magnetic chitosan chelating resin.

Multi-principles analysis of Cu(II) adsorption in water on magnetic microspheres and modified Chitosan

Biogenic synthesis of ferrous(III) oxide and Fe3O4/SiO2 using Chlorella sp. and its adsorption properties of water contaminated with copper(II) ions

Preparation of modified multiwalled carbon nanotubes (l-Arg-CS/MWCNTs-COOH/Fe3O4) as sorbent for dispersive solid phase extraction of Cu(II), Pb(II) and Cd(II) in wastewater samples

Preparation of Chitosan/Poly(Acrylic Acid) Magnetic Composite Microspheres and Applications in the Removal of Copper(Ii) Ions from Aqueous Solutions

Synthesis of magnetic Fe3O4@SiO2 nanoparticles decorated with polyvinyl alcohol for Cu(II) and Cd(II) ions removal from aqueous solution

A novel removal of Ni2+ ions from water solutions using dispersive solid-phase extraction method with nano Fe3O4/chitosan-acrylamide hydrogel

Diverse Surface Chemistry of Cobalt Ferrite Nanoparticles to Optimize Copper(II) Removal from Aqueous Media

Sulfhydryl Functionalized Magnetic Chitosan as an Efficient Adsorbent for High-Performance Removal of Cd(II) from Water: Adsorption Isotherms, Kinetic, and Reusability Studies

Removal of vanadium and palladium ions by adsorption onto magnetic chitosan nanoparticles

Magnetic recyclable biosorbents based on cotton cellulose and chitosan for copper(ii) removal from polluted water