Abstract:Over the next decade, the production and use of hydrogen in various sectors of the global economy is anticipated to grow significantly. It is an already important feedstock in the production of ammonia and desulfurization of fuels in addition to being used in metals refining and as a coolant in thermal electric power plants. More recently, hydrogen is being considered for long-term seasonal energy storage for energy derived from renewables like solar and wind. To alleviate the severe costs of building out completely new infrastructure, the U.S. natural gas pipeline represents an enticing proposition for hydrogen storage and a potential distribution network from centralized production facilities. Embrittlement concerns of the pipeline with hydrogen limit the hydrogen partial pressure/concentration of hydrogen to be stored. Because many end use applications often require high purity hydrogen, it is necessary to separate/de-blend hydrogen from natural gas and compress it at the point-of-use. This talk presents high-temperature polymer electrolyte membrane (HT-PEM) electrochemical hydrogen pumps for separating hydrogen from gas mixtures. Hydrogen purification to +99% from syngas (25mol% hydrogen and 40mol% carbon monoxide (CO)) at 1 A cm -2 and cell voltage of 0.4 V with an electrochemical hydrogen pump was demonstrated. About 90% of hydrogen used in the United States today derives from steam-reformed natural gas that contains large concentrations of CO – which is a potent platinum electrocatalyst poison at temperatures below 100 °C. The hydrogen purification from syngas was possible with an electrochemical hydrogen pump operated at 220 °C and by using: i.) an ion pair HT-PEM that exploits electrostatic interactions to prevent phosphoric acid leaching at elevated temperatures from the membrane matrix and in the presence of water and ii.) a phosphonic acid ionomer electrode binder. The membrane electrode assembly (MEA) with the said materials and platinum on carbon (Pt/C) electrocatalyst was also effective for purifying hydrogen from other types of reformed hydrocarbons with different CO and hydrogen concentrations. Unexpectedly, operating the HT-PEM hydrogen pump at 220 °C minimized CO impact on cell polarization. At this temperature, cell polarization was governed by the hydrogen concentration in the gas feed. These observations motivate future work to develop new electrodes and electrode binders that can extract, purify, and compress hydrogen with feed streams that have low hydrogen content and contain other constituents in natural gas (methane, ethane, t-butyl mercaptan, etc).

The effect of concentration polarization and chemical interactions on electrochemical hydrogen pump

Electrochemical pumps based on ion-pair membranes for separation of hydrogen from low-concentration mixtures

(Invited) Electrochemical Pumping for Hydrogen Storage and Distribution in the Natural Gas Pipeline

Purifying hydrogen from dilute hydrogen-natural gas mixtures using HT-PEM electrochemical hydrogen pumps

High Purity Hydrogen and Carbon Dioxide Separation with Electrochemical Pump Operation of HT-PBI Fuel Cell at 120°C

Understanding the Influence of Electrode Potential on Differently Charged Hydrogen Sources in a Hydrogen Evolution Reaction under Neutral Environments

Hydrogen Separation and Purification from Various Gas Mixtures by Means of Electrochemical Membrane Technology in the Temperature Range 100–160 °C

Insights into the pH effect on hydrogen electrocatalysis

High-performance Microfluidic Electrochemical Reactor for Efficient Hydrogen Evolution

Investigation of Water Effects on Hydrogen Dissolution, Diffusion, and Reaction in High Temperature Proton Exchange Membrane Fuel Cell

Critical role of hydrogen sorption kinetics in electrocatalytic CO 2 reduction revealed by on-chip in situ transport investigations

Preparation and Characterization of Symmetrical Protonic Ceramic Fuel Cells As Electrochemical Hydrogen Pumps

Modulating Interfacial Hydrogen-Bond Environment by Electrolyte Engineering Promotes Acidic CO2 Electrolysis

Influence of Contact Pressure on Hydrogen Crossover and Polarization Behavior in AEM Water Electrolysis

Effect of multi-interface electron transportation and molecule adsorption on hydrogen evolution reaction

Pulsed Dynamic Electrolysis Enhanced PEMWE Hydrogen Production: Revealing the Effects of Pulsed Electric Fields on Protons Mass Transport and Hydrogen Bubble Escape

Room-temperature Electrochemical Water–gas Shift Reaction for High Purity Hydrogen Production

Insights into Hydrophobicity‐tuned Catalyst Microenvironment in Gas Diffusion Electrode for Boosting CO2 Electrolysis

Design Focus of Anodes Toward High-Current-Density Low-Pt-Loading Proton Exchange Membrane Fuel Cells

A La1.85Mg0.15Ce2O7-δ-based Ceramic Hydrogen Pump for Stable Hydrogen Separation out of the H2-CO2 Mixtures

The Effect of Cell Compression and Cathode Pressure on Hydrogen Crossover in PEM Water Electrolysis