Battery cost forecasting: a review of methods and results with an outlook to 2050

Lukas Mauler,Fabian Duffner,Wolfgang G. Zeier,Jens Leker

DOI: https://doi.org/10.1039/d1ee01530c

2021-01-01

Abstract:This review analyzes 53 publications that forecast battery cost and provides transparency on methodological and technological details.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences

What problem does this paper attempt to address?

Battery cost modeling: A review and directions for future research

F. Duffner,M. Wentker,M. Greenwood,J. Leker

DOI: https://doi.org/10.1016/j.rser.2020.109872

IF: 16.799

2020-07-01

Renewable and Sustainable Energy Reviews

Abstract:<p>Cost reduction of electric vehicles (EVs), which depends largely on their most cost-intensive component, the battery, is the prerequisite for their market success. To achieve this cost reduction, accurate and detailed cost forecasts are necessary to make the right operational and strategic decisions like focusing on the right technology, product design, or process steps. Driven by this, numerous cost models were developed in recent years. The study at hand gives a systematic overview of the scientific publications within this research field and therefore provides researchers, industry representatives and policy makers with an overview of the benefits, reliability and transparency of the models studied. A total of 633 publications were initially identified. Conducting a systematic pre-selection, we selected the 21 most relevant ones which were analyzed in detail based on 17 characteristics. These characteristics were categorized and discussed in 6 main areas, namely impact of cost models, used cost estimation technique, model architecture and transparency, technology parameters, technical and operational depth of the calculation model, as well as the reported costs. In addition, five major recommendations for future research were derived.</p>

energy & fuels,green & sustainable science & technology
Cost Projection of State of the Art Lithium-Ion Batteries for Electric Vehicles Up to 2030

Gert Berckmans,Maarten Messagie,Jelle Smekens,Noshin Omar,Lieselot Vanhaverbeke,Joeri Van Mierlo,

DOI: https://doi.org/10.3390/en10091314

IF: 3.2

2017-09-01

Energies

Abstract:The negative impact of the automotive industry on climate change can be tackled by changing from fossil driven vehicles towards battery electric vehicles with no tailpipe emissions. However their adoption mainly depends on the willingness to pay for the extra cost of the traction battery. The goal of this paper is to predict the cost of a battery pack in 2030 when considering two aspects: firstly a decade of research will ensure an improvement in material sciences altering a battery’s chemical composition. Secondly by considering the price erosion due to the production cost optimization, by maturing of the market and by evolving towards to a mass-manufacturing situation. The cost of a lithium Nickel Manganese Cobalt Oxide (NMC) battery (Cathode: NMC 6:2:2 ; Anode: graphite) as well as silicon based lithium-ion battery (Cathode: NMC 6:2:2 ; Anode: silicon alloy), expected to be on the market in 10 years, will be predicted to tackle the first aspect. The second aspect will be considered by combining process-based cost calculations with learning curves, which takes the increasing battery market into account. The 100 dollar/kWh sales barrier will be reached respectively between 2020-2025 for silicon based lithium-ion batteries and 2025–2030 for NMC batteries, which will give a boost to global electric vehicle adoption.

energy & fuels
Techno-Economic Analysis of Different Battery Cell Chemistries for the Passenger Vehicle Market

Samuel Hasselwander,Markus Meyer,Ines Österle

DOI: https://doi.org/10.3390/batteries9070379

2023-07-15

Batteries

Abstract:The introduction of battery electric vehicles on the global market has triggered a sustained upheaval in the automotive industry. In this process, the new properties of a battery-electric powertrain lead to a different set of central requirements, such as increasing the range, lifetime or the fast-charging capability of the vehicle battery. This paper develops a bottom-up systematic model to assess the current and future impact of different battery technologies on vehicle costs. For this purpose, it summarises the scientific findings of automotive battery cell chemistries and, flanked by novel expert interviews and teardown data, derives key values for them. Based on the data obtained, modelling is carried out to demonstrate the technical and economic suitability of the identified cell chemistries and their impact on the range and total cost of electric vehicles. Lithium iron phosphate batteries appear to be able to achieve a price saving of up to 21% in the small vehicle segment compared to nickel-rich cell chemistries, provided that customers are prepared to accept a reduced range. At the same time, further efficiency improvements of the powertrain lead us to expect that, in combination with future high-energy cells, ranges of more than 800 km can be achieved even in the mid-size vehicle segment. It turns out that depending on whether the focus of the vehicle is on cost, range or performance, different battery technologies are likely to be used in the future.
Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs

Fabian Duffner,Lukas Mauler,Marc Wentker,Jens Leker,Martin Winter

DOI: https://doi.org/10.1016/j.ijpe.2020.107982

IF: 11.251

2021-02-01

International Journal of Production Economics

Abstract:<p>Cost-efficient battery cell manufacturing is a topic of intense discussion in both industry and academia, as battery costs are crucial for the market success of electrical vehicles (EVs). Based on forecasted EV growth rates, battery cell manufacturers are investing billions of dollars in new battery cell plants. Whether these billion-dollar investments are economically viable depends on the materialization of forecasted EV growth rates and company-specific competitive market positions. For both, cost-efficient battery cell manufacturing is key for success. To ensure cost-efficient battery cell manufacturing, transparency is necessary regarding overall manufacturing costs, their cost drivers, and the monetary value of potential cost reductions. Driven by these requirements, a cost model for a large-scale battery cell factory is developed. The model relies on the process-based cost modelling technique (PBCM) and includes more than 250 parameters. Based on this cost model, directions are provided, how minimum costs can be achieved reflecting current and future state of technology. Further, it is outlined which process steps and cost elements have the greatest impact on total cost and should thus be focused within future cost reduction activities.</p>

engineering, manufacturing, industrial,operations research & management science
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective

Maximilian Fichtner,Kristina Edström,Elixabete Ayerbe,Maitane Berecibar,Arghya Bhowmik,Ivano E. Castelli,Simon Clark,Robert Dominko,Merve Erakca,Alejandro A. Franco,Alexis Grimaud,Birger Horstmann,Arnulf Latz,Henning Lorrmann,Marcel Meeus,Rekha Narayan,Frank Pammer,Janna Ruhland,Helge Stein,Tejs Vegge,Marcel Weil

DOI: https://doi.org/10.1002/aenm.202102904

IF: 27.8

2021-12-05

Advanced Energy Materials

Abstract:The development of new batteries has historically been achieved through discovery and development cycles based on the intuition of the researcher, followed by experimental trial and error—often helped along by serendipitous breakthroughs. Meanwhile, it is evident that new strategies are needed to master the ever‐growing complexity in the development of battery systems, and to fast‐track the transfer of findings from the laboratory into commercially viable products. This review gives an overview over the future needs and the current state‐of‐the art of five research pillars of the European Large‐Scale Research Initiative BATTERY 2030+, namely 1) Battery Interface Genome in combination with a Materials Acceleration Platform (BIG‐MAP), progress toward the development of 2) self‐healing battery materials, and methods for operando, 3) sensing to monitor battery health. These subjects are complemented by an overview over current and up‐coming strategies to optimize 4) manufacturability of batteries and efforts toward development of a circular battery economy through implementation of 5) recyclability aspects in the design of the battery. This review gives an overview over the current state‐of‐the‐art and the future needs and in battery research with special emphasis on the five research pillars of the European Large‐Scale Research Initiative BATTERY 2030+, namely 1) BIG‐MAP, 2) self‐healing battery materials, 3) sensing to monitor battery health, and 4) manufacturability and 5) recyclability of batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Insights and reviews on battery lifetime prediction from research to practice

Xudong Qu,Dapai Shi,Jingyuan Zhao,Manh-Kien Tran,Zhenghong Wang,Michael Fowler,Yubo Lian,Andrew F. Burke

DOI: https://doi.org/10.1016/j.jechem.2024.03.013

IF: 13.1

2024-07-01

Journal of Energy Chemistry

Abstract:The rising demand for energy storage solutions, especially in the electric vehicle and renewable energy sectors, highlights the importance of accurately predicting battery health to enhance their longevity and reliability. This article comprehensively examines various methods used to forecast battery health, including physics-based models, empirical models, and equivalent circuit models, among others. It delves into the promise of data-driven prognostics, utilizing both conventional machine learning and cutting-edge deep neural network techniques. The advantages and limitations of hybrid models are thoroughly analyzed, with a focus on the benefits of integrating diverse data sources to improve prognostic precision. Through practical case studies, the article showcases the effectiveness and flexibility of these approaches. It also critically addresses the challenges encountered in applying battery health prognostics in real-world scenarios, such as issues of scalability, complexity, and data anomalies. Despite these challenges, the article underscores the emerging opportunities brought about by recent technological, academic, and research advancements. These include the development of digital twin models for batteries, the use of data-centric AI and standardized benchmarking, the potential integration of blockchain technology for enhanced data security and transparency, and the synergy between edge and cloud computing to boost data analysis and processing. The primary goal of this article is to enrich the understanding of current battery health prognostic techniques and to inspire further research aimed at overcoming existing hurdles and tapping into new opportunities. It concludes with a visionary perspective on future research directions and potential developments in this evolving field, encouraging both researchers and practitioners to explore innovative solutions.

chemistry, physical,engineering, chemical, applied,energy & fuels
Projecting the Price of Lithium-Ion NMC Battery Packs Using a Multifactor Learning Curve Model

Xaviery N. Penisa,Michael T. Castro,Jethro Daniel A. Pascasio,Eugene A. Esparcia,Oliver Schmidt,Joey D. Ocon

DOI: https://doi.org/10.3390/en13205276

IF: 3.2

2020-10-11

Energies

Abstract:Renewable energy (RE) utilization is expected to increase in the coming years due to its decreasing costs and the mounting socio-political pressure to decarbonize the world’s energy systems. On the other hand, lithium-ion (Li-ion) batteries are on track to hit the target 100 USD/kWh price in the next decade due to economy of scale and manufacturing process improvements, evident in the rise in Li-ion gigafactories. The forecast of RE and Li-ion technology costs is important for planning RE integration into existing energy systems. Previous cost predictions on Li-ion batteries were conducted using conventional learning curve models based on a single factor, such as either installed capacity or innovation activity. A two-stage learning curve model was recently investigated wherein mineral costs were taken as a factor for material cost to set the floor price, and material cost was a major factor for the battery pack price. However, these models resulted in the overestimation of future prices. In this work, the future prices of Li-ion nickel manganese cobalt oxide (NMC) battery packs - a battery chemistry of choice in the electric vehicle and stationary grid storage markets - were projected up to year 2025 using multi-factor learning curve models. Among the generated models, the two-factor learning curve model has the most realistic and statistically sound results having learning rates of 21.18% for battery demand and 3.0% for innovation. By year 2024, the projected price would fall below the 100 USD/kWh industry benchmark battery pack price, consistent with most market research predictions. Techno-economic case studies on the microgrid applications of the forecasted prices of Li-ion NMC batteries were conducted. Results showed that the decrease in future prices of Li-ion NMC batteries would make 2020 and 2023 the best years to start investing in an optimum (solar photovoltaic + wind + diesel generator + Li-ion NMC) and 100% RE (solar photovoltaic + wind + Li-ion NMC) off-grid energy system, respectively. A hybrid grid-tied (solar photovoltaic + grid + Li-ion NMC) configuration is the best grid-tied energy system under the current net metering policy, with 2020 being the best year to deploy the investment.

energy & fuels
Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells

F. Degen,M. Winter,D. Bendig,J. Tübke

DOI: https://doi.org/10.1038/s41560-023-01355-z

IF: 56.7

2023-09-29

Nature Energy

Abstract:Due to the rapidly increasing demand for electric vehicles, the need for battery cells is also increasing considerably. However, the production of battery cells requires enormous amounts of energy, which is expensive and produces greenhouse gas emissions. Here, by combining data from literature and from own research, we analyse how much energy lithium-ion battery (LIB) and post lithium-ion battery (PLIB) cell production requires on cell and macro-economic levels, currently and in the future (until 2040). On the cell level, we find that PLIB cells require less energy than LIB cells per produced cell energy. On the macro-economic level, we find that the energy consumption for the global production of LIB and PLIB cells will be 130,000 GWh if no measures are taken. Yet, it is possible to optimize future production and save up to 66% of this energy demand.

materials science, multidisciplinary,energy & fuels
An Evaluation of Energy Storage Cost and Performance Characteristics

Kendall Mongird,Vilayanur Viswanathan,Patrick Balducci,Jan Alam,Vanshika Fotedar,Vladimir Koritarov,Boualem Hadjerioua

DOI: https://doi.org/10.3390/en13133307

IF: 3.2

2020-06-28

Energies

Abstract:The energy storage industry has expanded globally as costs continue to fall and opportunities in consumer, transportation, and grid applications are defined. As the rapid evolution of the industry continues, it has become increasingly important to understand how varying technologies compare in terms of cost and performance. This paper defines and evaluates cost and performance parameters of six battery energy storage technologies (BESS)—lithium-ion batteries, lead-acid batteries, redox flow batteries, sodium-sulfur batteries, sodium-metal halide batteries, and zinc-hybrid cathode batteries—four non-BESS storage systems—pumped storage hydropower, flywheels, compressed air energy storage, and ultracapacitors—and combustion turbines. Cost and performance information was compiled based on an extensive literature review, conversations with vendors and stakeholders, and costs of systems procured at sites across the United States. Detailed cost and performance estimates are presented for 2018 and projected out to 2025. Annualized costs were also calculated for each technology.

energy & fuels
Empirically grounded technology forecasts and the energy transition

Rupert Way,Matthew C. Ives,Penny Mealy,J. Doyne Farmer

DOI: https://doi.org/10.1016/j.joule.2022.08.009

IF: 46.048

2022-09-21

Joule

Abstract:Rapidly decarbonizing the global energy system is critical for addressing climate change, but concerns about costs have been a barrier to implementation. Most energy-economy models have historically underestimated deployment rates for renewable energy technologies and overestimated their costs. These issues have driven calls for alternative approaches and more reliable technology forecasting methods. Here, we use an approach based on probabilistic cost forecasting methods that have been statistically validated by backtesting on more than 50 technologies. We generate probabilistic cost forecasts for solar energy, wind energy, batteries, and electrolyzers, conditional on deployment. We use these methods to estimate future energy system costs and explore how technology cost uncertainty propagates through to system costs in three different scenarios. Compared to continuing with a fossil fuel-based system, a rapid green energy transition will likely result in overall net savings of many trillions of dollars—even without accounting for climate damages or co-benefits of climate policy.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Breaking it down: A techno-economic assessment of the impact of battery pack design on disassembly costs

Laura Lander,Chris Tagnon,Viet Nguyen-Tien,Emma Kendrick,Robert J.R. Elliott,Andrew P. Abbott,Jacqueline S. Edge,Gregory J. Offer

DOI: https://doi.org/10.1016/j.apenergy.2022.120437

IF: 11.2

2022-12-07

Applied Energy

Abstract:The electrification of the transport sector is a critical part of the net-zero transition. The mass adoption of electric vehicles (EVs) powered by lithium-ion batteries in the coming decade will inevitably lead to a large amount of battery waste, which needs handling in a safe and environmentally friendly manner. Battery recycling is a sustainable treatment option at the battery end-of-life that supports a circular economy. However, heterogeneity in pack designs across battery manufacturers are hampering the establishment of an efficient disassembly process, hence making recycling less viable. A comprehensive techno-economic assessment of the disassembly process was conducted, which identified cost hotspots in battery pack designs and to guide design optimisation strategies that help save time and cost for end-of-life treatment. The analyses include six commercially available EV battery packs: Renault Zoe, Nissan Leaf, Tesla Model 3, Peugeot 208, BAIC and BYD Han. The BAIC and BYD battery packs exhibit lower disassembly costs (US 47.41 per pack, respectively), compared to the Peugeot 208 and Nissan Leaf (US 194.11 per pack, respectively). This variation in disassembly cost is due mostly to the substantial differences in number of modules and fasteners. The economic assessment suggests that full automation is required to make disassembly viable by 2040, as it could boost disassembly capacity by up to 600 %, while substantially achieving cost savings of up to US$190 M per year.

energy & fuels,engineering, chemical
Optimal Control of a Battery Storage On the Energy Market

Stephan Schlüter,Abhinav Das,Mathew Davison

2024-07-29

Abstract:Electricity storage is crucial for a successful transition towards carbon-neutral energy production. Despite considerable research and a number of promising future alternatives such as hydrogen, battery storages currently remain the first choice. However, costs remain high and it remains to be shown whether an investment can be profitable. This article addresses this question by modelling a battery storage operating in the German power market. We consider two periods with very distinct price dynamics, namely a calm year (2020) and a turbulent year (2023). It shows that even for low battery costs a 2020 style price environment does not allow for profitable battery operation, whereas current market conditions allow for positive payoffs.

Optimization and Control
Battery selection for optimal grid-outage resilient photovoltaic and battery systems

Stamatis Tsianikas,Jian Zhou,Nooshin Yousefi,David W. Coit

DOI: https://doi.org/10.48550/arXiv.1901.11389

IF: 4.729

2019-01-22

Signal Processing

Abstract:The first and most important purpose of the current research work is to investigate the effects that different battery types have on the optimal configuration of photovoltaic (PV) and battery systems, from both economic and resilience perspectives. Many industry reports, as well as research papers, have already highlighted the crucial role that storage systems have in the coming years in the electricity sector, especially when combined with renewable energy systems (RES). Given the high cost of storage technologies, there is an urgent need for optimizing such integrated energy systems. In this paper, a simulation-based method is adopted and improved, in order to compare different battery types based on their characteristics by considering projected trends in the future. After the introduction of four different battery types, i.e. lead-acid, sodium sulphur, vanadium redox and lithium-ion, the mathematical model for the optimization problem is presented, along with the required explanations. Subsequently, a case study is described and the numerical assumptions are defined. Therein, our specific focus addresses the different values that the four battery types possess in three critical parameters, i.e. battery cost, efficiency and depth of discharge (DoD). Finally, results and discussion are provided in an illustrative and informative way. This model provides a useful guide for relevant future work in the area, and also serves as a baseline for more comprehensive methodologies regarding optimal sizing of photovoltaic and battery systems.
Energy Forecasting: A Review and Outlook

Tao Hong,Pierre Pinson,Yi Wang,Rafał Weron,Dazhi Yang,Hamidreza Zareipour

DOI: https://doi.org/10.1109/OAJPE.2020.3029979

2020-01-01

IEEE Open Access Journal of Power and Energy

Abstract:Forecasting has been an essential part of the power and energy industry. Researchers and practitioners have contributed thousands of papers on forecasting electricity demand and prices, and renewable generation (e.g., wind and solar power). This article offers a brief review of influential energy forecasting papers; summarizes research trends; discusses importance of reproducible research and points out six valuable open data sources; makes recommendations about publishing high-quality research papers; and offers an outlook into the future of energy forecasting.
On battery materials and methods

R. Borah,F.R. Hughson,J. Johnston,T. Nann

DOI: https://doi.org/10.1016/j.mtadv.2019.100046

IF: 9.918

2020-06-01

Materials Today Advances

Abstract:Economical and efficient energy storage in general, and battery technology, in particular, are as imperative as humanity transitions to a renewable energy economy. Rare and/or expensive battery materials are unsuitable for widespread practical application, and an alternative has to be found for the currently prevalent lithium-ion battery technology. In this review article, we discuss the current state-of-the-art of battery materials from a perspective that focuses on the renewable energy market pull. We provide an overview of the most common materials classes and a guideline for practitioners and researchers for the choice of sustainable and promising future materials. In addition, we also discussed the best practice for battery performance testing and reporting.

materials science, multidisciplinary
Towards a green electromobility transition: A systematic review of the state of the art on electric vehicle battery systems disassembly

Dominik Hertel,Gerald Bräunig,Matthias Thürer

DOI: https://doi.org/10.1016/j.jmsy.2024.03.013

IF: 12.1

2024-04-13

Journal of Manufacturing Systems

Abstract:To achieve the sustainable development goals, there is a need to realize a green electromobility transition. Yet, this alone is not enough. There is also the question on how to manage end-of-life battery systems to reduce environmental pollution caused by improper disposal. A major challenge is battery disassembly, which precedes any reuse or recycling. If this disassembly is not cost-effective, cost-efficient, and scalable, the potential of electromobility will not realize or may even backfire. In response to this pressing issue, this study presents a systematic review of the literature on battery disassembly to summarize the state of art of the 43 papers identified, and to present a pathway for further developments of the field. Although the field evolved over the last years, many questions remain unanswered. Main issues are the automated disassembly of electric vehicle battery systems that can adapt to different variants, and the generation of data records for disassembly optimization using AI algorithms. This necessitates standardizing the design of electric vehicle battery systems and its process steps. Practical application trials can be conducted initially by providing data on the product life cycle of electric vehicle battery systems. In general, identified papers are less than expected. This raises the concern that research once again remains reactive instead of proactively finding solutions.

engineering, manufacturing, industrial,operations research & management science
Rapidly declining costs of truck batteries and fuel cells enable large-scale road freight electrification

Steffen Link,Annegret Stephan,Daniel Speth,Patrick Plötz

DOI: https://doi.org/10.1038/s41560-024-01531-9

IF: 56.7

2024-05-14

Nature Energy

Abstract:Low-carbon road freight transport is pivotal in mitigating global warming. Nonetheless, electrifying heavy-duty vehicles poses a tremendous challenge due to high technical requirements and cost competitiveness. Data on future truck costs are scarce and uncertain, complicating assessments of the future role of zero-emission truck (ZET) technologies. Here we derive most likely cost developments for price setting ZET components by meta forecasting from more than 200 original sources. We find that costs are primed to decline much faster than expected, with significant differences between scientific and near-market estimates. Specifically, battery system costs could drop by 64% to 75% and fall below €150 kWh −1 by no later than 2035, whereas fuel cell system costs may exhibit even higher cost reductions but are unlikely to reach €100 kWh −1 before the early 2040s. This fast cost decline supports an optimistic view on the ZET market diffusion and has substantial implications for future energy and transport systems.

materials science, multidisciplinary,energy & fuels
A novel economic method of battery modeling in stand-alone renewable energy systems to reduce life cycle costs

Abbas Khanahmadi,Mohammad Manthouri,Reza Ghaffarpour,Mahdi Mozaffarilegha

DOI: https://doi.org/10.1016/j.est.2021.103422

IF: 9.4

2021-12-01

Journal of Energy Storage

Abstract:Since the main part of a stand-alone Renewable Energy System (RES) is related to the battery, effective means of reducing the energy ‎mismatch between generation and demand could be obtained using such devices. But with the advent of new types of batteries with unique capabilities, choosing the right type of battery used in stand-alone RESs, in terms of technical and economic components including battery life costs, operation costs, and repair and maintenance costs, has become a very important issue. This research tries a significant step forward since previous conducted researches on ‎storage systems are based on oversimplified economic battery models, considering the impact of power generation and consumption, as well as the impact of battery lifetime on battery lifetime-related costs. Considering the battery lifetime feature, multi-objective optimization has been provided to minimize the costs and maximize the useful lifetime of the system through the Teaching-learning-based optimization (TLBO) algorithm. Technical and economic analysis shows that the generation cost of each scattered product varies according to the type of battery optimization and with increasing system useful life, the TCPDBES index system increases. The results illustrate that the battery type selection varies according to the grid-independent lifetime and the ‎use of Lithium-ion battery, Gel Lead Acid battery, and AGM (Absorbent Glass Mat) Lead Acid types has the minimum energy storage cost for 15, 10, and 5 year lifetimes, respectively.‎‎

energy & fuels
Li-ion batteries for automotive applications – Quo vadis?

Holger Fink

DOI: https://doi.org/10.1007/978-3-658-13255-2_7

2016-01-01

Proceedings

Abstract:Besides excellent user experience of electrical power trains, cost reduction of battery systems, legislative factors, and global urbanization will significantly drive electrification of automotive power trains within the next few years. The key success factor for a sustainable success of electrified power trains is the energy storage system. Using technical and commercial data currently available, a market prognosis for Robert Bosch for the years 2020ff is derived and is described in this paper. The most import key performance indicators (KPIs), such as safety, lifetime, and energy density, as well as specific price in EUR/kWh and the volumetric energy density in Wh/l for 2020 are presented. Besides Li-ion technology (LIT), current status and the roadmaps of the so called post Li-ion technologies (PLIT) are introduced. Post Li-ion battery systems are promising as increase in energy density and particularly lowering of cost can be foreseen. In this paper, Robert Bosch provides a possible scenario for the transition from LIT to PLIT.
Battery optimization by machine learning algorithms: Research gap via bibliometric analysis

Nico Hananda,Azure Kamul,Christian Harito,Endang Djuana,Gregorius Natanael Elwirehardja,Bens Pardamean,Fergyanto E. Gunawan,Arief S. Budiman,Muhammad Asrol,A. A. N. Perwira Redi,Tim Pasang

DOI: https://doi.org/10.1051/e3sconf/202338801020

2023-01-01

E3S Web of Conferences

Abstract:Technological developments enable low-carbon transitions to be accelerated by conceptualization systems and innovations for research and development to generate clean energy. Batteries are becoming one of the essential parts of the science of electrical power sources. Lithium-ion batteries are part of the change and development factors in technologies that significantly impact the portable devices sector and the development of electric vehicles. Designing the material structure and composition of battery manufacturing with the help of engineering system design will form a much more optimal battery. Machine learning algorithms can easily optimize the battery’s composition through battery experiment test data history to produce a more optimal battery configuration. This study is prepared to identify research gaps in topics related to machine learning for battery optimization. Related studies about machine learning for battery optimization are identified using bibliometric analysis and systematic literature review of the study search index through database Scopus-indexed publications. The results from this paper reveal energy management systems and strategies, hybrid vehicles, other optimization algorithms, battery electrodes, and the safety of batteries as the particular research gap according to machine learning for battery optimization. This paper expects research on battery optimization using machine learning methods will continue to be developed to maximize the potential of machine learning algorithms in helping the research process.

Battery cost forecasting: a review of methods and results with an outlook to 2050

Battery cost modeling: A review and directions for future research

Cost Projection of State of the Art Lithium-Ion Batteries for Electric Vehicles Up to 2030

Techno-Economic Analysis of Different Battery Cell Chemistries for the Passenger Vehicle Market

Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs

Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective

Insights and reviews on battery lifetime prediction from research to practice

Projecting the Price of Lithium-Ion NMC Battery Packs Using a Multifactor Learning Curve Model

Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells

An Evaluation of Energy Storage Cost and Performance Characteristics

Empirically grounded technology forecasts and the energy transition

Breaking it down: A techno-economic assessment of the impact of battery pack design on disassembly costs

Optimal Control of a Battery Storage On the Energy Market

Battery selection for optimal grid-outage resilient photovoltaic and battery systems

Energy Forecasting: A Review and Outlook

On battery materials and methods

Towards a green electromobility transition: A systematic review of the state of the art on electric vehicle battery systems disassembly

Rapidly declining costs of truck batteries and fuel cells enable large-scale road freight electrification

A novel economic method of battery modeling in stand-alone renewable energy systems to reduce life cycle costs

Li-ion batteries for automotive applications – Quo vadis?

Battery optimization by machine learning algorithms: Research gap via bibliometric analysis